lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

netdev: add more functions to netdevice ops

Browse Source 
This patch moves neigh_setup and hard_start_xmit into the network device ops
structure. For bisection, fix all the previously converted drivers as well.
Bonding driver took the biggest hit on this.

Added a prefetch of the hard_start_xmit in the fast path to try and reduce
any impact this would have.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Stephen Hemminger
2008-11-20 20:14:53 -08:00
committed by David S. Miller
parent 6ab33d5171
commit 008298231a
36 changed files with 183 additions and 93 deletions
Download Patch File Download Diff File Expand all files Collapse all files

45
drivers/net/tg3.c
View File

@@ -12614,19 +12614,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
else
tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES;
/* All chips before 5787 can get confused if TX buffers
* straddle the 4GB address boundary in some cases.
*/
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
tp->dev->hard_start_xmit = tg3_start_xmit;
else
tp->dev->hard_start_xmit = tg3_start_xmit_dma_bug;
tp->rx_offset = 2;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
(tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0)
@@ -13346,6 +13333,26 @@ static void __devinit tg3_init_coal(struct tg3 *tp)
static const struct net_device_ops tg3_netdev_ops = {
.ndo_open = tg3_open,
.ndo_stop = tg3_close,
.ndo_start_xmit = tg3_start_xmit,
.ndo_get_stats = tg3_get_stats,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = tg3_set_rx_mode,
.ndo_set_mac_address = tg3_set_mac_addr,
.ndo_do_ioctl = tg3_ioctl,
.ndo_tx_timeout = tg3_tx_timeout,
.ndo_change_mtu = tg3_change_mtu,
#if TG3_VLAN_TAG_USED
.ndo_vlan_rx_register = tg3_vlan_rx_register,
#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = tg3_poll_controller,
#endif
};
static const struct net_device_ops tg3_netdev_ops_dma_bug = {
.ndo_open = tg3_open,
.ndo_stop = tg3_close,
.ndo_start_xmit = tg3_start_xmit_dma_bug,
.ndo_get_stats = tg3_get_stats,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = tg3_set_rx_mode,
@@ -13475,7 +13482,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
tp->rx_jumbo_pending = TG3_DEF_RX_JUMBO_RING_PENDING;
tp->tx_pending = TG3_DEF_TX_RING_PENDING;
dev->netdev_ops = &tg3_netdev_ops;
netif_napi_add(dev, &tp->napi, tg3_poll, 64);
dev->ethtool_ops = &tg3_ethtool_ops;
dev->watchdog_timeo = TG3_TX_TIMEOUT;
@@ -13488,6 +13494,17 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
goto err_out_iounmap;
}
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
dev->netdev_ops = &tg3_netdev_ops;
else
dev->netdev_ops = &tg3_netdev_ops_dma_bug;
/* The EPB bridge inside 5714, 5715, and 5780 and any
* device behind the EPB cannot support DMA addresses > 40-bit.
* On 64-bit systems with IOMMU, use 40-bit dma_mask.