isci: kill ->is_direct_attached

domain_device ->parent conveys the same information.

Occurrences of ->is_direct_attached appear next to incomplete open-coded
versions of dev_is_sata(), clean those up as well.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/scsi/isci/host.h

@@ -55,6 +55,7 @@
 #ifndef _SCI_HOST_H_
 #define _SCI_HOST_H_
 
+#include <scsi/sas_ata.h>
 #include "remote_device.h"
 #include "phy.h"
 #include "isci.h"
@@ -378,8 +379,7 @@ static inline int sci_remote_device_node_count(struct isci_remote_device *idev)
 {
 	struct domain_device *dev = idev->domain_dev;
 
-	if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) &&
+	if (dev_is_sata(dev) && dev->parent)
-	    !idev->is_direct_attached)
 		return SCU_STP_REMOTE_NODE_COUNT;
 	return SCU_SSP_REMOTE_NODE_COUNT;
 }

drivers/scsi/isci/remote_device.c

@@ -1113,16 +1113,9 @@ static enum sci_status sci_remote_device_da_construct(struct isci_port *iport,
 {
 	enum sci_status status;
 	struct sci_port_properties properties;
-	struct domain_device *dev = idev->domain_dev;
 
 	sci_remote_device_construct(iport, idev);
 
-	/*
-	 * This information is request to determine how many remote node context
-	 * entries will be needed to store the remote node.
-	 */
-	idev->is_direct_attached = true;
-
 	sci_port_get_properties(iport, &properties);
 	/* Get accurate port width from port's phy mask for a DA device. */
 	idev->device_port_width = hweight32(properties.phy_mask);
@@ -1134,12 +1127,6 @@ static enum sci_status sci_remote_device_da_construct(struct isci_port *iport,
 	if (status != SCI_SUCCESS)
 		return status;
 
-	if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV ||
-	    (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev))
-		/* pass */;
-	else
-		return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
-
 	idev->connection_rate = sci_port_get_max_allowed_speed(iport);
 
 	return SCI_SUCCESS;
@@ -1171,19 +1158,13 @@ static enum sci_status sci_remote_device_ea_construct(struct isci_port *iport,
 	if (status != SCI_SUCCESS)
 		return status;
 
-	if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV ||
+	/* For SAS-2 the physical link rate is actually a logical link
-	    (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev))
-		/* pass */;
-	else
-		return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
-
-	/*
-	 * For SAS-2 the physical link rate is actually a logical link
 	 * rate that incorporates multiplexing.  The SCU doesn't
 	 * incorporate multiplexing and for the purposes of the
 	 * connection the logical link rate is that same as the
 	 * physical.  Furthermore, the SAS-2 and SAS-1.1 fields overlay
-	 * one another, so this code works for both situations. */
+	 * one another, so this code works for both situations.
+	 */
 	idev->connection_rate = min_t(u16, sci_port_get_max_allowed_speed(iport),
 					 dev->linkrate);
 

drivers/scsi/isci/remote_device.h

@@ -94,7 +94,6 @@ struct isci_remote_device {
 	struct sci_base_state_machine sm;
 	u32 device_port_width;
 	enum sas_linkrate connection_rate;
-	bool is_direct_attached;
 	struct isci_port *owning_port;
 	struct sci_remote_node_context rnc;
 	/* XXX unify with device reference counting and delete */

drivers/scsi/isci/remote_node_context.c

@@ -131,7 +131,7 @@ static void sci_remote_node_context_construct_buffer(struct sci_remote_node_cont
 
 	rnc->ssp.arbitration_wait_time = 0;
 
-	if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
+	if (dev_is_sata(dev)) {
 		rnc->ssp.connection_occupancy_timeout =
 			ihost->user_parameters.stp_max_occupancy_timeout;
 		rnc->ssp.connection_inactivity_timeout =
@@ -219,13 +219,12 @@ static void sci_remote_node_context_validate_context_buffer(struct sci_remote_no
 
 	rnc_buffer->ssp.is_valid = true;
 
-	if (!idev->is_direct_attached &&
+	if (dev_is_sata(dev) && dev->parent) {
-	    (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))) {
 		sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_96);
 	} else {
 		sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_32);
 
-		if (idev->is_direct_attached)
+		if (!dev->parent)
 			sci_port_setup_transports(idev->owning_port,
 						  sci_rnc->remote_node_index);
 	}
@@ -287,10 +286,8 @@ static void sci_remote_node_context_resuming_state_enter(struct sci_base_state_m
 	 * resume because of a target reset we also need to update
 	 * the STPTLDARNI register with the RNi of the device
 	 */
-	if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) &&
+	if (dev_is_sata(dev) && !dev->parent)
-	    idev->is_direct_attached)
+		sci_port_setup_transports(idev->owning_port, rnc->remote_node_index);
-		sci_port_setup_transports(idev->owning_port,
-					       rnc->remote_node_index);
 
 	sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME);
 }
@@ -553,18 +550,10 @@ enum sci_status sci_remote_node_context_resume(struct sci_remote_node_context *s
 
 		sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p);
 
-		/* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */
+		if (dev_is_sata(dev) && dev->parent)
-		if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev))
-			sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING);
-		else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
-			if (idev->is_direct_attached) {
-				/* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */
-				sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING);
-			} else {
 			sci_change_state(&sci_rnc->sm, SCI_RNC_INVALIDATING);
-			}
+		else
-		} else
+			sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING);
-			return SCI_FAILURE;
 		return SCI_SUCCESS;
 	}
 	case SCI_RNC_TX_RX_SUSPENDED:

drivers/scsi/isci/request.c

@@ -3193,7 +3193,7 @@ sci_io_request_construct(struct isci_host *ihost,
 
 	if (dev->dev_type == SAS_END_DEV)
 		/* pass */;
-	else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))
+	else if (dev_is_sata(dev))
 		memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd));
 	else if (dev_is_expander(dev))
 		/* pass */;
@@ -3215,8 +3215,7 @@ enum sci_status sci_task_request_construct(struct isci_host *ihost,
 	/* Build the common part of the request */
 	sci_general_request_construct(ihost, idev, ireq);
 
-	if (dev->dev_type == SAS_END_DEV ||
+	if (dev->dev_type == SAS_END_DEV || dev_is_sata(dev)) {
-	    dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
 		set_bit(IREQ_TMF, &ireq->flags);
 		memset(ireq->tc, 0, sizeof(struct scu_task_context));
 	} else