Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

arch/alpha/kernel/core_polaris.c

@@ -0,0 +1,203 @@
+/*
+ *      linux/arch/alpha/kernel/core_polaris.c
+ *
+ * POLARIS chip-specific code
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_polaris.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+#define DEBUG_CONFIG 0
+
+#if DEBUG_CONFIG
+# define DBG_CFG(args)	printk args
+#else
+# define DBG_CFG(args)
+#endif
+
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address.  This is fairly straightforward
+ * on POLARIS, since the chip itself generates Type 0 or Type 1
+ * cycles automatically depending on the bus number (Bus 0 is
+ * hardwired to Type 0, all others are Type 1.  Peer bridges
+ * are not supported).
+ *
+ * All types:
+ *
+ *  3 3 3 3|3 3 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |1|1|1|1|1|0|0|1|1|1|1|1|1|1|1|0|B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|x|x|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	23:16	bus number (8 bits = 128 possible buses)
+ *	15:11	Device number (5 bits)
+ *	10:8	function number
+ *	 7:2	register number
+ *  
+ * Notes:
+ *	The function number selects which function of a multi-function device 
+ *	(e.g., scsi and ethernet).
+ * 
+ *	The register selects a DWORD (32 bit) register offset.  Hence it
+ *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ *	bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+	     unsigned long *pci_addr, u8 *type1)
+{
+	u8 bus = pbus->number;
+
+	*type1 = (bus == 0) ? 0 : 1;
+	*pci_addr = (bus << 16) | (device_fn << 8) | (where) |
+		    POLARIS_DENSE_CONFIG_BASE;
+
+        DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
+                 " returning address 0x%p\n"
+                 bus, device_fn, where, *pci_addr));
+
+	return 0;
+}
+
+static int
+polaris_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		    int size, u32 *value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+                return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		*value = __kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		*value = __kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*value = *(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int 
+polaris_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		     int size, u32 value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+                return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		__kernel_stb(value, *(vucp)addr);
+		mb();
+		__kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		__kernel_stw(value, *(vusp)addr);
+		mb();
+		__kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*(vuip)addr = value;
+		mb();
+		*(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops polaris_pci_ops = 
+{
+	.read =		polaris_read_config,
+	.write =	polaris_write_config,
+};
+
+void __init
+polaris_init_arch(void)
+{
+	struct pci_controller *hose;
+
+	/* May need to initialize error reporting (see PCICTL0/1), but
+	 * for now assume that the firmware has done the right thing
+	 * already.
+	 */
+#if 0
+	printk("polaris_init_arch(): trusting firmware for setup\n");
+#endif
+
+	/*
+	 * Create our single hose.
+	 */
+
+	pci_isa_hose = hose = alloc_pci_controller();
+	hose->io_space = &ioport_resource;
+	hose->mem_space = &iomem_resource;
+	hose->index = 0;
+
+	hose->sparse_mem_base = 0;
+	hose->dense_mem_base = POLARIS_DENSE_MEM_BASE - IDENT_ADDR;
+	hose->sparse_io_base = 0;
+	hose->dense_io_base = POLARIS_DENSE_IO_BASE - IDENT_ADDR;
+
+	hose->sg_isa = hose->sg_pci = NULL;
+
+	/* The I/O window is fixed at 2G @ 2G.  */
+	__direct_map_base = 0x80000000;
+	__direct_map_size = 0x80000000;
+}
+
+static inline void
+polaris_pci_clr_err(void)
+{
+	*(vusp)POLARIS_W_STATUS;
+	/* Write 1's to settable bits to clear errors */
+	*(vusp)POLARIS_W_STATUS = 0x7800;
+	mb();
+	*(vusp)POLARIS_W_STATUS;
+}
+
+void
+polaris_machine_check(unsigned long vector, unsigned long la_ptr,
+		      struct pt_regs * regs)
+{
+	/* Clear the error before any reporting.  */
+	mb();
+	mb();
+	draina();
+	polaris_pci_clr_err();
+	wrmces(0x7);
+	mb();
+
+	process_mcheck_info(vector, la_ptr, regs, "POLARIS",
+			    mcheck_expected(0));
+}