Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

arch/i386/kernel/timers/common.c

@@ -0,0 +1,160 @@
+/*
+ *	Common functions used across the timers go here
+ */
+
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+
+#include <asm/io.h>
+#include <asm/timer.h>
+#include <asm/hpet.h>
+
+#include "mach_timer.h"
+
+/* ------ Calibrate the TSC -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+
+#define CALIBRATE_TIME	(5 * 1000020/HZ)
+
+unsigned long __init calibrate_tsc(void)
+{
+	mach_prepare_counter();
+
+	{
+		unsigned long startlow, starthigh;
+		unsigned long endlow, endhigh;
+		unsigned long count;
+
+		rdtsc(startlow,starthigh);
+		mach_countup(&count);
+		rdtsc(endlow,endhigh);
+
+
+		/* Error: ECTCNEVERSET */
+		if (count <= 1)
+			goto bad_ctc;
+
+		/* 64-bit subtract - gcc just messes up with long longs */
+		__asm__("subl %2,%0\n\t"
+			"sbbl %3,%1"
+			:"=a" (endlow), "=d" (endhigh)
+			:"g" (startlow), "g" (starthigh),
+			 "0" (endlow), "1" (endhigh));
+
+		/* Error: ECPUTOOFAST */
+		if (endhigh)
+			goto bad_ctc;
+
+		/* Error: ECPUTOOSLOW */
+		if (endlow <= CALIBRATE_TIME)
+			goto bad_ctc;
+
+		__asm__("divl %2"
+			:"=a" (endlow), "=d" (endhigh)
+			:"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
+
+		return endlow;
+	}
+
+	/*
+	 * The CTC wasn't reliable: we got a hit on the very first read,
+	 * or the CPU was so fast/slow that the quotient wouldn't fit in
+	 * 32 bits..
+	 */
+bad_ctc:
+	return 0;
+}
+
+#ifdef CONFIG_HPET_TIMER
+/* ------ Calibrate the TSC using HPET -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for getting the CPU freq.
+ * Second output is parameter 1 (when non NULL)
+ * Set 2^32 * (1 / (tsc per HPET clk)) for delay_hpet().
+ * calibrate_tsc() calibrates the processor TSC by comparing
+ * it to the HPET timer of known frequency.
+ * Too much 64-bit arithmetic here to do this cleanly in C
+ */
+#define CALIBRATE_CNT_HPET 	(5 * hpet_tick)
+#define CALIBRATE_TIME_HPET 	(5 * KERNEL_TICK_USEC)
+
+unsigned long __init calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr)
+{
+	unsigned long tsc_startlow, tsc_starthigh;
+	unsigned long tsc_endlow, tsc_endhigh;
+	unsigned long hpet_start, hpet_end;
+	unsigned long result, remain;
+
+	hpet_start = hpet_readl(HPET_COUNTER);
+	rdtsc(tsc_startlow, tsc_starthigh);
+	do {
+		hpet_end = hpet_readl(HPET_COUNTER);
+	} while ((hpet_end - hpet_start) < CALIBRATE_CNT_HPET);
+	rdtsc(tsc_endlow, tsc_endhigh);
+
+	/* 64-bit subtract - gcc just messes up with long longs */
+	__asm__("subl %2,%0\n\t"
+		"sbbl %3,%1"
+		:"=a" (tsc_endlow), "=d" (tsc_endhigh)
+		:"g" (tsc_startlow), "g" (tsc_starthigh),
+		 "0" (tsc_endlow), "1" (tsc_endhigh));
+
+	/* Error: ECPUTOOFAST */
+	if (tsc_endhigh)
+		goto bad_calibration;
+
+	/* Error: ECPUTOOSLOW */
+	if (tsc_endlow <= CALIBRATE_TIME_HPET)
+		goto bad_calibration;
+
+	ASM_DIV64_REG(result, remain, tsc_endlow, 0, CALIBRATE_TIME_HPET);
+	if (remain > (tsc_endlow >> 1))
+		result++; /* rounding the result */
+
+	if (tsc_hpet_quotient_ptr) {
+		unsigned long tsc_hpet_quotient;
+
+		ASM_DIV64_REG(tsc_hpet_quotient, remain, tsc_endlow, 0,
+			CALIBRATE_CNT_HPET);
+		if (remain > (tsc_endlow >> 1))
+			tsc_hpet_quotient++; /* rounding the result */
+		*tsc_hpet_quotient_ptr = tsc_hpet_quotient;
+	}
+
+	return result;
+bad_calibration:
+	/*
+	 * the CPU was so fast/slow that the quotient wouldn't fit in
+	 * 32 bits..
+	 */
+	return 0;
+}
+#endif
+
+/* calculate cpu_khz */
+void __init init_cpu_khz(void)
+{
+	if (cpu_has_tsc) {
+		unsigned long tsc_quotient = calibrate_tsc();
+		if (tsc_quotient) {
+			/* report CPU clock rate in Hz.
+			 * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
+			 * clock/second. Our precision is about 100 ppm.
+			 */
+			{	unsigned long eax=0, edx=1000;
+				__asm__("divl %2"
+		       		:"=a" (cpu_khz), "=d" (edx)
+        	       		:"r" (tsc_quotient),
+	                	"0" (eax), "1" (edx));
+				printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000);
+			}
+		}
+	}
+}