Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

arch/mips/pci/ops-msc.c

@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
+ *    All rights reserved.
+ *    Authors: Carsten Langgaard <carstenl@mips.com>
+ *             Maciej W. Rozycki <macro@mips.com>
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * MIPS boards specific PCI support.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mips-boards/msc01_pci.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+/*
+ *  PCI configuration cycle AD bus definition
+ */
+/* Type 0 */
+#define PCI_CFG_TYPE0_REG_SHF           0
+#define PCI_CFG_TYPE0_FUNC_SHF          8
+
+/* Type 1 */
+#define PCI_CFG_TYPE1_REG_SHF           0
+#define PCI_CFG_TYPE1_FUNC_SHF          8
+#define PCI_CFG_TYPE1_DEV_SHF           11
+#define PCI_CFG_TYPE1_BUS_SHF           16
+
+static int msc_pcibios_config_access(unsigned char access_type,
+	struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
+{
+	unsigned char busnum = bus->number;
+	unsigned char type;
+	u32 intr;
+
+#ifdef CONFIG_MIPS_BOARDS_GEN
+	if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) {
+		/* MIPS Core boards have SOCit connected as device 17 */
+		return -1;
+	}
+#endif
+
+	/* Clear status register bits. */
+	MSC_WRITE(MSC01_PCI_INTSTAT,
+		  (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT));
+
+	/* Setup address */
+	if (busnum == 0)
+		type = 0;	/* Type 0 */
+	else
+		type = 1;	/* Type 1 */
+
+	MSC_WRITE(MSC01_PCI_CFGADDR,
+		  ((busnum << MSC01_PCI_CFGADDR_BNUM_SHF) |
+		   (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF)
+		   | (PCI_FUNC(devfn) <<
+		      MSC01_PCI_CFGADDR_FNUM_SHF) | ((where /
+						      4) <<
+						     MSC01_PCI_CFGADDR_RNUM_SHF)
+		   | (type)));
+
+	/* Perform access */
+	if (access_type == PCI_ACCESS_WRITE)
+		MSC_WRITE(MSC01_PCI_CFGDATA, *data);
+	else
+		MSC_READ(MSC01_PCI_CFGDATA, *data);
+
+	/* Detect Master/Target abort */
+	MSC_READ(MSC01_PCI_INTSTAT, intr);
+	if (intr & (MSC01_PCI_INTCFG_MA_BIT |
+		    MSC01_PCI_INTCFG_TA_BIT)) {
+		/* Error occurred */
+
+		/* Clear bits */
+		MSC_READ(MSC01_PCI_INTSTAT, intr);
+		MSC_WRITE(MSC01_PCI_INTSTAT,
+			  (MSC01_PCI_INTCFG_MA_BIT |
+			   MSC01_PCI_INTCFG_TA_BIT));
+
+		return -1;
+	}
+
+	return 0;
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly.  Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int msc_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+			     int where, int size, u32 * val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (msc_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
+	                              &data))
+		return -1;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int msc_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+			      int where, int size, u32 val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (size == 4)
+		data = val;
+	else {
+		if (msc_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
+		                              where, &data))
+			return -1;
+
+		if (size == 1)
+			data = (data & ~(0xff << ((where & 3) << 3))) |
+				(val << ((where & 3) << 3));
+		else if (size == 2)
+			data = (data & ~(0xffff << ((where & 3) << 3))) |
+				(val << ((where & 3) << 3));
+	}
+
+	if (msc_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where,
+				       &data))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops msc_pci_ops = {
+	.read = msc_pcibios_read,
+	.write = msc_pcibios_write
+};