Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
This commit is contained in:
Linus Torvalds
724
drivers/net/isa-skeleton.c
Normal file
724
drivers/net/isa-skeleton.c
Normal file
@@ -0,0 +1,724 @@
|
||||
/* isa-skeleton.c: A network driver outline for linux.
|
||||
*
|
||||
* Written 1993-94 by Donald Becker.
|
||||
*
|
||||
* Copyright 1993 United States Government as represented by the
|
||||
* Director, National Security Agency.
|
||||
*
|
||||
* This software may be used and distributed according to the terms
|
||||
* of the GNU General Public License, incorporated herein by reference.
|
||||
*
|
||||
* The author may be reached as becker@scyld.com, or C/O
|
||||
* Scyld Computing Corporation
|
||||
* 410 Severn Ave., Suite 210
|
||||
* Annapolis MD 21403
|
||||
*
|
||||
* This file is an outline for writing a network device driver for the
|
||||
* the Linux operating system.
|
||||
*
|
||||
* To write (or understand) a driver, have a look at the "loopback.c" file to
|
||||
* get a feel of what is going on, and then use the code below as a skeleton
|
||||
* for the new driver.
|
||||
*
|
||||
*/
|
||||
|
||||
static const char *version =
|
||||
"isa-skeleton.c:v1.51 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
|
||||
|
||||
/*
|
||||
* Sources:
|
||||
* List your sources of programming information to document that
|
||||
* the driver is your own creation, and give due credit to others
|
||||
* that contributed to the work. Remember that GNU project code
|
||||
* cannot use proprietary or trade secret information. Interface
|
||||
* definitions are generally considered non-copyrightable to the
|
||||
* extent that the same names and structures must be used to be
|
||||
* compatible.
|
||||
*
|
||||
* Finally, keep in mind that the Linux kernel is has an API, not
|
||||
* ABI. Proprietary object-code-only distributions are not permitted
|
||||
* under the GPL.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/fcntl.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/in.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/netdevice.h>
|
||||
#include <linux/etherdevice.h>
|
||||
#include <linux/skbuff.h>
|
||||
#include <linux/bitops.h>
|
||||
|
||||
#include <asm/system.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/dma.h>
|
||||
|
||||
/*
|
||||
* The name of the card. Is used for messages and in the requests for
|
||||
* io regions, irqs and dma channels
|
||||
*/
|
||||
static const char* cardname = "netcard";
|
||||
|
||||
/* First, a few definitions that the brave might change. */
|
||||
|
||||
/* A zero-terminated list of I/O addresses to be probed. */
|
||||
static unsigned int netcard_portlist[] __initdata =
|
||||
{ 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
|
||||
|
||||
/* use 0 for production, 1 for verification, >2 for debug */
|
||||
#ifndef NET_DEBUG
|
||||
#define NET_DEBUG 2
|
||||
#endif
|
||||
static unsigned int net_debug = NET_DEBUG;
|
||||
|
||||
/* The number of low I/O ports used by the ethercard. */
|
||||
#define NETCARD_IO_EXTENT 32
|
||||
|
||||
#define MY_TX_TIMEOUT ((400*HZ)/1000)
|
||||
|
||||
/* Information that need to be kept for each board. */
|
||||
struct net_local {
|
||||
struct net_device_stats stats;
|
||||
long open_time; /* Useless example local info. */
|
||||
|
||||
/* Tx control lock. This protects the transmit buffer ring
|
||||
* state along with the "tx full" state of the driver. This
|
||||
* means all netif_queue flow control actions are protected
|
||||
* by this lock as well.
|
||||
*/
|
||||
spinlock_t lock;
|
||||
};
|
||||
|
||||
/* The station (ethernet) address prefix, used for IDing the board. */
|
||||
#define SA_ADDR0 0x00
|
||||
#define SA_ADDR1 0x42
|
||||
#define SA_ADDR2 0x65
|
||||
|
||||
/* Index to functions, as function prototypes. */
|
||||
|
||||
static int netcard_probe1(struct net_device *dev, int ioaddr);
|
||||
static int net_open(struct net_device *dev);
|
||||
static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
|
||||
static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs);
|
||||
static void net_rx(struct net_device *dev);
|
||||
static int net_close(struct net_device *dev);
|
||||
static struct net_device_stats *net_get_stats(struct net_device *dev);
|
||||
static void set_multicast_list(struct net_device *dev);
|
||||
static void net_tx_timeout(struct net_device *dev);
|
||||
|
||||
|
||||
/* Example routines you must write ;->. */
|
||||
#define tx_done(dev) 1
|
||||
static void hardware_send_packet(short ioaddr, char *buf, int length);
|
||||
static void chipset_init(struct net_device *dev, int startp);
|
||||
|
||||
/*
|
||||
* Check for a network adaptor of this type, and return '0' iff one exists.
|
||||
* If dev->base_addr == 0, probe all likely locations.
|
||||
* If dev->base_addr == 1, always return failure.
|
||||
* If dev->base_addr == 2, allocate space for the device and return success
|
||||
* (detachable devices only).
|
||||
*/
|
||||
static int __init do_netcard_probe(struct net_device *dev)
|
||||
{
|
||||
int i;
|
||||
int base_addr = dev->base_addr;
|
||||
int irq = dev->irq;
|
||||
|
||||
SET_MODULE_OWNER(dev);
|
||||
|
||||
if (base_addr > 0x1ff) /* Check a single specified location. */
|
||||
return netcard_probe1(dev, base_addr);
|
||||
else if (base_addr != 0) /* Don't probe at all. */
|
||||
return -ENXIO;
|
||||
|
||||
for (i = 0; netcard_portlist[i]; i++) {
|
||||
int ioaddr = netcard_portlist[i];
|
||||
if (netcard_probe1(dev, ioaddr) == 0)
|
||||
return 0;
|
||||
dev->irq = irq;
|
||||
}
|
||||
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
static void cleanup_card(struct net_device *dev)
|
||||
{
|
||||
#ifdef jumpered_dma
|
||||
free_dma(dev->dma);
|
||||
#endif
|
||||
#ifdef jumpered_interrupts
|
||||
free_irq(dev->irq, dev);
|
||||
#endif
|
||||
release_region(dev->base_addr, NETCARD_IO_EXTENT);
|
||||
}
|
||||
|
||||
#ifndef MODULE
|
||||
struct net_device * __init netcard_probe(int unit)
|
||||
{
|
||||
struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
|
||||
int err;
|
||||
|
||||
if (!dev)
|
||||
return ERR_PTR(-ENOMEM);
|
||||
|
||||
sprintf(dev->name, "eth%d", unit);
|
||||
netdev_boot_setup_check(dev);
|
||||
|
||||
err = do_netcard_probe(dev);
|
||||
if (err)
|
||||
goto out;
|
||||
err = register_netdev(dev);
|
||||
if (err)
|
||||
goto out1;
|
||||
return dev;
|
||||
out1:
|
||||
cleanup_card(dev);
|
||||
out:
|
||||
free_netdev(dev);
|
||||
return ERR_PTR(err);
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* This is the real probe routine. Linux has a history of friendly device
|
||||
* probes on the ISA bus. A good device probes avoids doing writes, and
|
||||
* verifies that the correct device exists and functions.
|
||||
*/
|
||||
static int __init netcard_probe1(struct net_device *dev, int ioaddr)
|
||||
{
|
||||
struct net_local *np;
|
||||
static unsigned version_printed;
|
||||
int i;
|
||||
int err = -ENODEV;
|
||||
|
||||
/* Grab the region so that no one else tries to probe our ioports. */
|
||||
if (!request_region(ioaddr, NETCARD_IO_EXTENT, cardname))
|
||||
return -EBUSY;
|
||||
|
||||
/*
|
||||
* For ethernet adaptors the first three octets of the station address
|
||||
* contains the manufacturer's unique code. That might be a good probe
|
||||
* method. Ideally you would add additional checks.
|
||||
*/
|
||||
if (inb(ioaddr + 0) != SA_ADDR0
|
||||
|| inb(ioaddr + 1) != SA_ADDR1
|
||||
|| inb(ioaddr + 2) != SA_ADDR2)
|
||||
goto out;
|
||||
|
||||
if (net_debug && version_printed++ == 0)
|
||||
printk(KERN_DEBUG "%s", version);
|
||||
|
||||
printk(KERN_INFO "%s: %s found at %#3x, ", dev->name, cardname, ioaddr);
|
||||
|
||||
/* Fill in the 'dev' fields. */
|
||||
dev->base_addr = ioaddr;
|
||||
|
||||
/* Retrieve and print the ethernet address. */
|
||||
for (i = 0; i < 6; i++)
|
||||
printk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
|
||||
|
||||
err = -EAGAIN;
|
||||
#ifdef jumpered_interrupts
|
||||
/*
|
||||
* If this board has jumpered interrupts, allocate the interrupt
|
||||
* vector now. There is no point in waiting since no other device
|
||||
* can use the interrupt, and this marks the irq as busy. Jumpered
|
||||
* interrupts are typically not reported by the boards, and we must
|
||||
* used autoIRQ to find them.
|
||||
*/
|
||||
|
||||
if (dev->irq == -1)
|
||||
; /* Do nothing: a user-level program will set it. */
|
||||
else if (dev->irq < 2) { /* "Auto-IRQ" */
|
||||
unsigned long irq_mask = probe_irq_on();
|
||||
/* Trigger an interrupt here. */
|
||||
|
||||
dev->irq = probe_irq_off(irq_mask);
|
||||
if (net_debug >= 2)
|
||||
printk(" autoirq is %d", dev->irq);
|
||||
} else if (dev->irq == 2)
|
||||
/*
|
||||
* Fixup for users that don't know that IRQ 2 is really
|
||||
* IRQ9, or don't know which one to set.
|
||||
*/
|
||||
dev->irq = 9;
|
||||
|
||||
{
|
||||
int irqval = request_irq(dev->irq, &net_interrupt, 0, cardname, dev);
|
||||
if (irqval) {
|
||||
printk("%s: unable to get IRQ %d (irqval=%d).\n",
|
||||
dev->name, dev->irq, irqval);
|
||||
goto out;
|
||||
}
|
||||
}
|
||||
#endif /* jumpered interrupt */
|
||||
#ifdef jumpered_dma
|
||||
/*
|
||||
* If we use a jumpered DMA channel, that should be probed for and
|
||||
* allocated here as well. See lance.c for an example.
|
||||
*/
|
||||
if (dev->dma == 0) {
|
||||
if (request_dma(dev->dma, cardname)) {
|
||||
printk("DMA %d allocation failed.\n", dev->dma);
|
||||
goto out1;
|
||||
} else
|
||||
printk(", assigned DMA %d.\n", dev->dma);
|
||||
} else {
|
||||
short dma_status, new_dma_status;
|
||||
|
||||
/* Read the DMA channel status registers. */
|
||||
dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
|
||||
(inb(DMA2_STAT_REG) & 0xf0);
|
||||
/* Trigger a DMA request, perhaps pause a bit. */
|
||||
outw(0x1234, ioaddr + 8);
|
||||
/* Re-read the DMA status registers. */
|
||||
new_dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
|
||||
(inb(DMA2_STAT_REG) & 0xf0);
|
||||
/*
|
||||
* Eliminate the old and floating requests,
|
||||
* and DMA4 the cascade.
|
||||
*/
|
||||
new_dma_status ^= dma_status;
|
||||
new_dma_status &= ~0x10;
|
||||
for (i = 7; i > 0; i--)
|
||||
if (test_bit(i, &new_dma_status)) {
|
||||
dev->dma = i;
|
||||
break;
|
||||
}
|
||||
if (i <= 0) {
|
||||
printk("DMA probe failed.\n");
|
||||
goto out1;
|
||||
}
|
||||
if (request_dma(dev->dma, cardname)) {
|
||||
printk("probed DMA %d allocation failed.\n", dev->dma);
|
||||
goto out1;
|
||||
}
|
||||
}
|
||||
#endif /* jumpered DMA */
|
||||
|
||||
np = netdev_priv(dev);
|
||||
spin_lock_init(&np->lock);
|
||||
|
||||
dev->open = net_open;
|
||||
dev->stop = net_close;
|
||||
dev->hard_start_xmit = net_send_packet;
|
||||
dev->get_stats = net_get_stats;
|
||||
dev->set_multicast_list = &set_multicast_list;
|
||||
|
||||
dev->tx_timeout = &net_tx_timeout;
|
||||
dev->watchdog_timeo = MY_TX_TIMEOUT;
|
||||
return 0;
|
||||
out1:
|
||||
#ifdef jumpered_interrupts
|
||||
free_irq(dev->irq, dev);
|
||||
#endif
|
||||
out:
|
||||
release_region(base_addr, NETCARD_IO_EXTENT);
|
||||
return err;
|
||||
}
|
||||
|
||||
static void net_tx_timeout(struct net_device *dev)
|
||||
{
|
||||
struct net_local *np = netdev_priv(dev);
|
||||
|
||||
printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
|
||||
tx_done(dev) ? "IRQ conflict" : "network cable problem");
|
||||
|
||||
/* Try to restart the adaptor. */
|
||||
chipset_init(dev, 1);
|
||||
|
||||
np->stats.tx_errors++;
|
||||
|
||||
/* If we have space available to accept new transmit
|
||||
* requests, wake up the queueing layer. This would
|
||||
* be the case if the chipset_init() call above just
|
||||
* flushes out the tx queue and empties it.
|
||||
*
|
||||
* If instead, the tx queue is retained then the
|
||||
* netif_wake_queue() call should be placed in the
|
||||
* TX completion interrupt handler of the driver instead
|
||||
* of here.
|
||||
*/
|
||||
if (!tx_full(dev))
|
||||
netif_wake_queue(dev);
|
||||
}
|
||||
|
||||
/*
|
||||
* Open/initialize the board. This is called (in the current kernel)
|
||||
* sometime after booting when the 'ifconfig' program is run.
|
||||
*
|
||||
* This routine should set everything up anew at each open, even
|
||||
* registers that "should" only need to be set once at boot, so that
|
||||
* there is non-reboot way to recover if something goes wrong.
|
||||
*/
|
||||
static int
|
||||
net_open(struct net_device *dev)
|
||||
{
|
||||
struct net_local *np = netdev_priv(dev);
|
||||
int ioaddr = dev->base_addr;
|
||||
/*
|
||||
* This is used if the interrupt line can turned off (shared).
|
||||
* See 3c503.c for an example of selecting the IRQ at config-time.
|
||||
*/
|
||||
if (request_irq(dev->irq, &net_interrupt, 0, cardname, dev)) {
|
||||
return -EAGAIN;
|
||||
}
|
||||
/*
|
||||
* Always allocate the DMA channel after the IRQ,
|
||||
* and clean up on failure.
|
||||
*/
|
||||
if (request_dma(dev->dma, cardname)) {
|
||||
free_irq(dev->irq, dev);
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
/* Reset the hardware here. Don't forget to set the station address. */
|
||||
chipset_init(dev, 1);
|
||||
outb(0x00, ioaddr);
|
||||
np->open_time = jiffies;
|
||||
|
||||
/* We are now ready to accept transmit requeusts from
|
||||
* the queueing layer of the networking.
|
||||
*/
|
||||
netif_start_queue(dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* This will only be invoked if your driver is _not_ in XOFF state.
|
||||
* What this means is that you need not check it, and that this
|
||||
* invariant will hold if you make sure that the netif_*_queue()
|
||||
* calls are done at the proper times.
|
||||
*/
|
||||
static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
|
||||
{
|
||||
struct net_local *np = netdev_priv(dev);
|
||||
int ioaddr = dev->base_addr;
|
||||
short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
|
||||
unsigned char *buf = skb->data;
|
||||
|
||||
/* If some error occurs while trying to transmit this
|
||||
* packet, you should return '1' from this function.
|
||||
* In such a case you _may not_ do anything to the
|
||||
* SKB, it is still owned by the network queueing
|
||||
* layer when an error is returned. This means you
|
||||
* may not modify any SKB fields, you may not free
|
||||
* the SKB, etc.
|
||||
*/
|
||||
|
||||
#if TX_RING
|
||||
/* This is the most common case for modern hardware.
|
||||
* The spinlock protects this code from the TX complete
|
||||
* hardware interrupt handler. Queue flow control is
|
||||
* thus managed under this lock as well.
|
||||
*/
|
||||
spin_lock_irq(&np->lock);
|
||||
|
||||
add_to_tx_ring(np, skb, length);
|
||||
dev->trans_start = jiffies;
|
||||
|
||||
/* If we just used up the very last entry in the
|
||||
* TX ring on this device, tell the queueing
|
||||
* layer to send no more.
|
||||
*/
|
||||
if (tx_full(dev))
|
||||
netif_stop_queue(dev);
|
||||
|
||||
/* When the TX completion hw interrupt arrives, this
|
||||
* is when the transmit statistics are updated.
|
||||
*/
|
||||
|
||||
spin_unlock_irq(&np->lock);
|
||||
#else
|
||||
/* This is the case for older hardware which takes
|
||||
* a single transmit buffer at a time, and it is
|
||||
* just written to the device via PIO.
|
||||
*
|
||||
* No spin locking is needed since there is no TX complete
|
||||
* event. If by chance your card does have a TX complete
|
||||
* hardware IRQ then you may need to utilize np->lock here.
|
||||
*/
|
||||
hardware_send_packet(ioaddr, buf, length);
|
||||
np->stats.tx_bytes += skb->len;
|
||||
|
||||
dev->trans_start = jiffies;
|
||||
|
||||
/* You might need to clean up and record Tx statistics here. */
|
||||
if (inw(ioaddr) == /*RU*/81)
|
||||
np->stats.tx_aborted_errors++;
|
||||
dev_kfree_skb (skb);
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if TX_RING
|
||||
/* This handles TX complete events posted by the device
|
||||
* via interrupts.
|
||||
*/
|
||||
void net_tx(struct net_device *dev)
|
||||
{
|
||||
struct net_local *np = netdev_priv(dev);
|
||||
int entry;
|
||||
|
||||
/* This protects us from concurrent execution of
|
||||
* our dev->hard_start_xmit function above.
|
||||
*/
|
||||
spin_lock(&np->lock);
|
||||
|
||||
entry = np->tx_old;
|
||||
while (tx_entry_is_sent(np, entry)) {
|
||||
struct sk_buff *skb = np->skbs[entry];
|
||||
|
||||
np->stats.tx_bytes += skb->len;
|
||||
dev_kfree_skb_irq (skb);
|
||||
|
||||
entry = next_tx_entry(np, entry);
|
||||
}
|
||||
np->tx_old = entry;
|
||||
|
||||
/* If we had stopped the queue due to a "tx full"
|
||||
* condition, and space has now been made available,
|
||||
* wake up the queue.
|
||||
*/
|
||||
if (netif_queue_stopped(dev) && ! tx_full(dev))
|
||||
netif_wake_queue(dev);
|
||||
|
||||
spin_unlock(&np->lock);
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* The typical workload of the driver:
|
||||
* Handle the network interface interrupts.
|
||||
*/
|
||||
static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs * regs)
|
||||
{
|
||||
struct net_device *dev = dev_id;
|
||||
struct net_local *np;
|
||||
int ioaddr, status;
|
||||
int handled = 0;
|
||||
|
||||
ioaddr = dev->base_addr;
|
||||
|
||||
np = netdev_priv(dev);
|
||||
status = inw(ioaddr + 0);
|
||||
|
||||
if (status == 0)
|
||||
goto out;
|
||||
handled = 1;
|
||||
|
||||
if (status & RX_INTR) {
|
||||
/* Got a packet(s). */
|
||||
net_rx(dev);
|
||||
}
|
||||
#if TX_RING
|
||||
if (status & TX_INTR) {
|
||||
/* Transmit complete. */
|
||||
net_tx(dev);
|
||||
np->stats.tx_packets++;
|
||||
netif_wake_queue(dev);
|
||||
}
|
||||
#endif
|
||||
if (status & COUNTERS_INTR) {
|
||||
/* Increment the appropriate 'localstats' field. */
|
||||
np->stats.tx_window_errors++;
|
||||
}
|
||||
out:
|
||||
return IRQ_RETVAL(handled);
|
||||
}
|
||||
|
||||
/* We have a good packet(s), get it/them out of the buffers. */
|
||||
static void
|
||||
net_rx(struct net_device *dev)
|
||||
{
|
||||
struct net_local *lp = netdev_priv(dev);
|
||||
int ioaddr = dev->base_addr;
|
||||
int boguscount = 10;
|
||||
|
||||
do {
|
||||
int status = inw(ioaddr);
|
||||
int pkt_len = inw(ioaddr);
|
||||
|
||||
if (pkt_len == 0) /* Read all the frames? */
|
||||
break; /* Done for now */
|
||||
|
||||
if (status & 0x40) { /* There was an error. */
|
||||
lp->stats.rx_errors++;
|
||||
if (status & 0x20) lp->stats.rx_frame_errors++;
|
||||
if (status & 0x10) lp->stats.rx_over_errors++;
|
||||
if (status & 0x08) lp->stats.rx_crc_errors++;
|
||||
if (status & 0x04) lp->stats.rx_fifo_errors++;
|
||||
} else {
|
||||
/* Malloc up new buffer. */
|
||||
struct sk_buff *skb;
|
||||
|
||||
lp->stats.rx_bytes+=pkt_len;
|
||||
|
||||
skb = dev_alloc_skb(pkt_len);
|
||||
if (skb == NULL) {
|
||||
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
|
||||
dev->name);
|
||||
lp->stats.rx_dropped++;
|
||||
break;
|
||||
}
|
||||
skb->dev = dev;
|
||||
|
||||
/* 'skb->data' points to the start of sk_buff data area. */
|
||||
memcpy(skb_put(skb,pkt_len), (void*)dev->rmem_start,
|
||||
pkt_len);
|
||||
/* or */
|
||||
insw(ioaddr, skb->data, (pkt_len + 1) >> 1);
|
||||
|
||||
netif_rx(skb);
|
||||
dev->last_rx = jiffies;
|
||||
lp->stats.rx_packets++;
|
||||
lp->stats.rx_bytes += pkt_len;
|
||||
}
|
||||
} while (--boguscount);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
/* The inverse routine to net_open(). */
|
||||
static int
|
||||
net_close(struct net_device *dev)
|
||||
{
|
||||
struct net_local *lp = netdev_priv(dev);
|
||||
int ioaddr = dev->base_addr;
|
||||
|
||||
lp->open_time = 0;
|
||||
|
||||
netif_stop_queue(dev);
|
||||
|
||||
/* Flush the Tx and disable Rx here. */
|
||||
|
||||
disable_dma(dev->dma);
|
||||
|
||||
/* If not IRQ or DMA jumpered, free up the line. */
|
||||
outw(0x00, ioaddr+0); /* Release the physical interrupt line. */
|
||||
|
||||
free_irq(dev->irq, dev);
|
||||
free_dma(dev->dma);
|
||||
|
||||
/* Update the statistics here. */
|
||||
|
||||
return 0;
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
* Get the current statistics.
|
||||
* This may be called with the card open or closed.
|
||||
*/
|
||||
static struct net_device_stats *net_get_stats(struct net_device *dev)
|
||||
{
|
||||
struct net_local *lp = netdev_priv(dev);
|
||||
short ioaddr = dev->base_addr;
|
||||
|
||||
/* Update the statistics from the device registers. */
|
||||
lp->stats.rx_missed_errors = inw(ioaddr+1);
|
||||
return &lp->stats;
|
||||
}
|
||||
|
||||
/*
|
||||
* Set or clear the multicast filter for this adaptor.
|
||||
* num_addrs == -1 Promiscuous mode, receive all packets
|
||||
* num_addrs == 0 Normal mode, clear multicast list
|
||||
* num_addrs > 0 Multicast mode, receive normal and MC packets,
|
||||
* and do best-effort filtering.
|
||||
*/
|
||||
static void
|
||||
set_multicast_list(struct net_device *dev)
|
||||
{
|
||||
short ioaddr = dev->base_addr;
|
||||
if (dev->flags&IFF_PROMISC)
|
||||
{
|
||||
/* Enable promiscuous mode */
|
||||
outw(MULTICAST|PROMISC, ioaddr);
|
||||
}
|
||||
else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS)
|
||||
{
|
||||
/* Disable promiscuous mode, use normal mode. */
|
||||
hardware_set_filter(NULL);
|
||||
|
||||
outw(MULTICAST, ioaddr);
|
||||
}
|
||||
else if(dev->mc_count)
|
||||
{
|
||||
/* Walk the address list, and load the filter */
|
||||
hardware_set_filter(dev->mc_list);
|
||||
|
||||
outw(MULTICAST, ioaddr);
|
||||
}
|
||||
else
|
||||
outw(0, ioaddr);
|
||||
}
|
||||
|
||||
#ifdef MODULE
|
||||
|
||||
static struct net_device *this_device;
|
||||
static int io = 0x300;
|
||||
static int irq;
|
||||
static int dma;
|
||||
static int mem;
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
int init_module(void)
|
||||
{
|
||||
struct net_device *dev;
|
||||
int result;
|
||||
|
||||
if (io == 0)
|
||||
printk(KERN_WARNING "%s: You shouldn't use auto-probing with insmod!\n",
|
||||
cardname);
|
||||
dev = alloc_etherdev(sizeof(struct net_local));
|
||||
if (!dev)
|
||||
return -ENOMEM;
|
||||
|
||||
/* Copy the parameters from insmod into the device structure. */
|
||||
dev->base_addr = io;
|
||||
dev->irq = irq;
|
||||
dev->dma = dma;
|
||||
dev->mem_start = mem;
|
||||
if (do_netcard_probe(dev) == 0) {
|
||||
if (register_netdev(dev) == 0)
|
||||
this_device = dev;
|
||||
return 0;
|
||||
}
|
||||
cleanup_card(dev);
|
||||
}
|
||||
free_netdev(dev);
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
void
|
||||
cleanup_module(void)
|
||||
{
|
||||
unregister_netdev(this_device);
|
||||
cleanup_card(this_device);
|
||||
free_netdev(this_device);
|
||||
}
|
||||
|
||||
#endif /* MODULE */
|
||||
|
||||
/*
|
||||
* Local variables:
|
||||
* compile-command:
|
||||
* gcc -D__KERNEL__ -Wall -Wstrict-prototypes -Wwrite-strings
|
||||
* -Wredundant-decls -O2 -m486 -c skeleton.c
|
||||
* version-control: t
|
||||
* kept-new-versions: 5
|
||||
* tab-width: 4
|
||||
* c-indent-level: 4
|
||||
* End:
|
||||
*/
|
||||
Reference in New Issue
Block a user