Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Check for offline nodes in pci NUMA code
  [POWERPC] Better check in show_instructions
  [POWERPC] POWER6 has 6 PMCs
  [POWERPC] Never panic when taking altivec exceptions from userspace
  [POWERPC] Fix IO Window Updates on P2P bridges.
  [POWERPC] Add Makefile entry for MPC832x_mds support
  [POWERPC] Fix MPC8360EMDS PB board support
  [POWERPC] ppc: Add missing calls to set_irq_regs
  [POWERPC] Off-by-one in /arch/ppc/platforms/mpc8*
  [POWERPC] Add DOS partition table support to mpc834x_itx_defconfig
  [POWERPC] spufs: fix support for read/write on cntl
  [POWERPC] Don't crash on cell with 2 BEs when !CONFIG_NUMA

arch/powerpc/configs/mpc834x_itx_defconfig

@@ -1248,7 +1248,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_AMIGA_PARTITION is not set
 # CONFIG_ATARI_PARTITION is not set
 # CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
 # CONFIG_LDM_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set

arch/powerpc/kernel/cputable.c

@@ -268,7 +268,7 @@ struct cpu_spec	cpu_specs[] = {
 		.cpu_user_features	= COMMON_USER_POWER6,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
+		.num_pmcs		= 6,
 		.oprofile_cpu_type	= "ppc64/power6",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
  		.oprofile_mmcra_sihv	= POWER6_MMCRA_SIHV,

arch/powerpc/kernel/pci_32.c

@@ -441,14 +441,14 @@ update_bridge_base(struct pci_bus *bus, int i)
 		end = res->end - off;
 		io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
 		io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
-		if (end > 0xffff) {
+		if (end > 0xffff)
-			pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
-					      start >> 16);
-			pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
-					      end >> 16);
 			io_base_lo |= PCI_IO_RANGE_TYPE_32;
-		} else
+		else
 			io_base_lo |= PCI_IO_RANGE_TYPE_16;
+		pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
+				start >> 16);
+		pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
+				end >> 16);
 		pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
 		pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
 

arch/powerpc/kernel/pci_64.c

@@ -199,8 +199,14 @@ struct pci_controller * pcibios_alloc_controller(struct device_node *dev)
 	pci_setup_pci_controller(phb);
 	phb->arch_data = dev;
 	phb->is_dynamic = mem_init_done;
-	if (dev)
+	if (dev) {
-		PHB_SET_NODE(phb, of_node_to_nid(dev));
+		int nid = of_node_to_nid(dev);
+
+		if (nid < 0 || !node_online(nid))
+			nid = -1;
+
+		PHB_SET_NODE(phb, nid);
+	}
 	return phb;
 }
 

arch/powerpc/kernel/process.c

@@ -341,13 +341,6 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 static int instructions_to_print = 16;
 
-#ifdef CONFIG_PPC64
-#define BAD_PC(pc)	((REGION_ID(pc) != KERNEL_REGION_ID) && \
-		         (REGION_ID(pc) != VMALLOC_REGION_ID))
-#else
-#define BAD_PC(pc)	((pc) < KERNELBASE)
-#endif
-
 static void show_instructions(struct pt_regs *regs)
 {
 	int i;
@@ -366,7 +359,8 @@ static void show_instructions(struct pt_regs *regs)
 		 * bad address because the pc *should* only be a
 		 * kernel address.
 		 */
-		if (BAD_PC(pc) || __get_user(instr, (unsigned int __user *)pc)) {
+		if (!__kernel_text_address(pc) ||
+		     __get_user(instr, (unsigned int __user *)pc)) {
 			printk("XXXXXXXX ");
 		} else {
 			if (regs->nip == pc)

arch/powerpc/kernel/traps.c

@@ -900,14 +900,13 @@ void kernel_fp_unavailable_exception(struct pt_regs *regs)
 
 void altivec_unavailable_exception(struct pt_regs *regs)
 {
-#if !defined(CONFIG_ALTIVEC)
 	if (user_mode(regs)) {
 		/* A user program has executed an altivec instruction,
 		   but this kernel doesn't support altivec. */
 		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
 		return;
 	}
-#endif
+
 	printk(KERN_EMERG "Unrecoverable VMX/Altivec Unavailable Exception "
 			"%lx at %lx\n", regs->trap, regs->nip);
 	die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT);

arch/powerpc/platforms/83xx/Kconfig

@@ -32,6 +32,13 @@ config MPC834x_ITX
 	  Be aware that PCI initialization is the bootloader's
 	  responsiblilty.
 
+config MPC8360E_PB
+	bool "Freescale MPC8360E PB"
+	select DEFAULT_UIMAGE
+	select QUICC_ENGINE
+	help
+	  This option enables support for the MPC836x EMDS Processor Board.
+
 endchoice
 
 config PPC_MPC832x
@@ -46,4 +53,10 @@ config MPC834x
 	select PPC_INDIRECT_PCI
 	default y if MPC834x_SYS || MPC834x_ITX
 
+config PPC_MPC836x
+	bool
+	select PPC_UDBG_16550
+	select PPC_INDIRECT_PCI
+	default y if MPC8360E_PB
+
 endmenu

arch/powerpc/platforms/83xx/Makefile

@@ -5,3 +5,5 @@ obj-y				:= misc.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_MPC834x_SYS)	+= mpc834x_sys.o
 obj-$(CONFIG_MPC834x_ITX)	+= mpc834x_itx.o
+obj-$(CONFIG_MPC8360E_PB)	+= mpc8360e_pb.o
+obj-$(CONFIG_MPC832x_MDS)	+= mpc832x_mds.o

arch/powerpc/platforms/83xx/mpc8360e_pb.c

@@ -30,6 +30,7 @@
 #include <linux/root_dev.h>
 #include <linux/initrd.h>
 
+#include <asm/of_device.h>
 #include <asm/system.h>
 #include <asm/atomic.h>
 #include <asm/time.h>
@@ -141,6 +142,24 @@ static void __init mpc8360_sys_setup_arch(void)
 #endif
 }
 
+static int __init mpc8360_declare_of_platform_devices(void)
+{
+	struct device_node *np;
+
+	for (np = NULL; (np = of_find_compatible_node(np, "network",
+					"ucc_geth")) != NULL;) {
+		int ucc_num;
+		char bus_id[BUS_ID_SIZE];
+
+		ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1;
+		snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num);
+		of_platform_device_create(np, bus_id, NULL);
+	}
+
+	return 0;
+}
+device_initcall(mpc8360_declare_of_platform_devices);
+
 void __init mpc8360_sys_init_IRQ(void)
 {
 

arch/powerpc/platforms/cell/spu_base.c

@@ -781,6 +781,17 @@ static int __init create_spu(struct device_node *spe)
 	if (!spu)
 		goto out;
 
+	spu->node = find_spu_node_id(spe);
+	if (spu->node >= MAX_NUMNODES) {
+		printk(KERN_WARNING "SPE %s on node %d ignored,"
+		       " node number too big\n", spe->full_name, spu->node);
+		printk(KERN_WARNING "Check if CONFIG_NUMA is enabled.\n");
+		return -ENODEV;
+	}
+	spu->nid = of_node_to_nid(spe);
+	if (spu->nid == -1)
+		spu->nid = 0;
+
 	ret = spu_map_device(spu, spe);
 	/* try old method */
 	if (ret)
@@ -788,10 +799,6 @@ static int __init create_spu(struct device_node *spe)
 	if (ret)
 		goto out_free;
 
-	spu->node = find_spu_node_id(spe);
-	spu->nid = of_node_to_nid(spe);
-	if (spu->nid == -1)
-		spu->nid = 0;
 	ret = spu_map_interrupts(spu, spe);
 	if (ret)
 		ret = spu_map_interrupts_old(spu, spe);

arch/powerpc/platforms/cell/spufs/file.c

@@ -246,6 +246,7 @@ static int spufs_cntl_open(struct inode *inode, struct file *file)
 
 static struct file_operations spufs_cntl_fops = {
 	.open = spufs_cntl_open,
+	.release = simple_attr_close,
 	.read = simple_attr_read,
 	.write = simple_attr_write,
 	.mmap = spufs_cntl_mmap,

arch/ppc/kernel/time.c

@@ -62,6 +62,7 @@
 #include <asm/cache.h>
 #include <asm/8xx_immap.h>
 #include <asm/machdep.h>
+#include <asm/irq_regs.h>
 
 #include <asm/time.h>
 
@@ -129,6 +130,7 @@ void wakeup_decrementer(void)
  */
 void timer_interrupt(struct pt_regs * regs)
 {
+	struct pt_regs *old_regs;
 	int next_dec;
 	unsigned long cpu = smp_processor_id();
 	unsigned jiffy_stamp = last_jiffy_stamp(cpu);
@@ -137,6 +139,7 @@ void timer_interrupt(struct pt_regs * regs)
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)
 		do_IRQ(regs);
 
+	old_regs = set_irq_regs(regs);
 	irq_enter();
 
 	while ((next_dec = tb_ticks_per_jiffy - tb_delta(&jiffy_stamp)) <= 0) {
@@ -188,6 +191,7 @@ void timer_interrupt(struct pt_regs * regs)
 		ppc_md.heartbeat();
 
 	irq_exit();
+	set_irq_regs(old_regs);
 }
 
 /*

arch/ppc/platforms/mpc8272ads_setup.c

@@ -196,7 +196,7 @@ static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
 	bd_t* bi = (void*)__res;
 	int fs_no = fsid_fcc1+pdev->id-1;
 
-	if(fs_no > ARRAY_SIZE(mpc82xx_enet_pdata)) {
+	if(fs_no >= ARRAY_SIZE(mpc82xx_enet_pdata)) {
 		return;
 	}
 
@@ -222,7 +222,7 @@ static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
 	int id = fs_uart_id_scc2fsid(idx);
 
 	/* no need to alter anything if console */
-	if ((id <= num) && (!pdev->dev.platform_data)) {
+	if ((id < num) && (!pdev->dev.platform_data)) {
 		pinfo = &mpc8272_uart_pdata[id];
 		pinfo->uart_clk = bd->bi_intfreq;
 		pdev->dev.platform_data = pinfo;

arch/ppc/platforms/mpc866ads_setup.c

@@ -259,7 +259,7 @@ static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
 	/* Get pointer to Communication Processor */
 	cp = cpmp;
 
-	if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) {
+	if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) {
 		printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
 		return;
 	}
@@ -305,7 +305,7 @@ static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev,
 	int id = fs_uart_id_smc2fsid(idx);
 
 	/* no need to alter anything if console */
-	if ((id <= num) && (!pdev->dev.platform_data)) {
+	if ((id < num) && (!pdev->dev.platform_data)) {
 		pinfo = &mpc866_uart_pdata[id];
 		pinfo->uart_clk = bd->bi_intfreq;
 		pdev->dev.platform_data = pinfo;

arch/ppc/platforms/mpc885ads_setup.c

@@ -263,7 +263,7 @@ static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
 	char *e;
 	int i;
 
-	if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) {
+	if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) {
 		printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
 		return;
 	}
@@ -371,7 +371,7 @@ static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev,
 	int id = fs_uart_id_smc2fsid(idx);
 
 	/* no need to alter anything if console */
-	if ((id <= num) && (!pdev->dev.platform_data)) {
+	if ((id < num) && (!pdev->dev.platform_data)) {
 		pinfo = &mpc885_uart_pdata[id];
 		pinfo->uart_clk = bd->bi_intfreq;
 		pdev->dev.platform_data = pinfo;