lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

tg3: Prevent tx BD corruption

Browse Source 
This patch prevents a tx BD corruption bug by preventing the device from
powering down the PLL from L1 if the link speed is 10Mbps or 100Mbps.

The same bits are also used to prevent a system hang during chip reset
resulting from a complicated set of events that ultimately leads to
PCIe block register corruption.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Matt Carlson
2009-08-25 10:07:27 +00:00
committed by David S. Miller
parent 521e6b90dd
commit 255ca311b6
2 changed files with 36 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

28
drivers/net/tg3.c
View File

@@ -3167,6 +3167,15 @@ relink:
pci_write_config_word(tp->pdev,
tp->pcie_cap + PCI_EXP_LNKCTL,
newlnkctl);
} else if (tp->tg3_flags3 & TG3_FLG3_TOGGLE_10_100_L1PLLPD) {
u32 newreg, oldreg = tr32(TG3_PCIE_LNKCTL);
if (tp->link_config.active_speed == SPEED_100 ||
tp->link_config.active_speed == SPEED_10)
newreg = oldreg & ~TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
else
newreg = oldreg | TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
if (newreg != oldreg)
tw32(TG3_PCIE_LNKCTL, newreg);
}
if (current_link_up != netif_carrier_ok(tp->dev)) {
@@ -6160,6 +6169,11 @@ static int tg3_chip_reset(struct tg3 *tp)
smp_mb();
synchronize_irq(tp->pdev->irq);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) {
val = tr32(TG3_PCIE_LNKCTL) & ~TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
tw32(TG3_PCIE_LNKCTL, val | TG3_PCIE_LNKCTL_L1_PLL_PD_DIS);
}
/* do the reset */
val = GRC_MISC_CFG_CORECLK_RESET;
@@ -6726,6 +6740,15 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32(TG3_CORR_ERR_STAT, TG3_CORR_ERR_STAT_CLEAR);
}
if (tp->tg3_flags3 & TG3_FLG3_TOGGLE_10_100_L1PLLPD) {
val = tr32(TG3_PCIE_LNKCTL);
if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG)
val |= TG3_PCIE_LNKCTL_L1_PLL_PD_DIS;
else
val &= ~TG3_PCIE_LNKCTL_L1_PLL_PD_DIS;
tw32(TG3_PCIE_LNKCTL, val);
}
/* This works around an issue with Athlon chipsets on
* B3 tigon3 silicon. This bit has no effect on any
* other revision. But do not set this on PCI Express
@@ -12274,6 +12297,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
tp->tg3_flags3 |= TG3_FLG3_USE_PHYLIB;
if ((tp->pci_chip_rev_id == CHIPREV_ID_57780_A1 &&
tr32(RCVLPC_STATS_ENABLE) & RCVLPC_STATSENAB_ASF_FIX) ||
tp->pci_chip_rev_id == CHIPREV_ID_57780_A0)
tp->tg3_flags3 |= TG3_FLG3_TOGGLE_10_100_L1PLLPD;
err = tg3_mdio_init(tp);
if (err)
return err;