lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

[PATCH] USB: move hardware-specific <linux/usb_*.h> to <linux/usb/*.h>

Browse Source 
This moves header files for controller-specific platform data
from <linux/usb_XXX.h> to <linux/usb/XXX.h> to start reducing
some clutter.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
David Brownell
2006-06-13 09:59:32 -07:00
committed by Greg Kroah-Hartman
parent a8c28f2389
commit 325a4af60d
5 changed files with 7 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

29
include/linux/usb/isp116x.h Normal file
View File

@@ -0,0 +1,29 @@
/*
* Board initialization code should put one of these into dev->platform_data
* and place the isp116x onto platform_bus.
*/
struct isp116x_platform_data {
/* Enable internal resistors on downstream ports */
unsigned sel15Kres:1;
/* On-chip overcurrent detection */
unsigned oc_enable:1;
/* INT output polarity */
unsigned int_act_high:1;
/* INT edge or level triggered */
unsigned int_edge_triggered:1;
/* Enable wakeup by devices on usb bus (e.g. wakeup
by attachment/detachment or by device activity
such as moving a mouse). When chosen, this option
prevents stopping internal clock, increasing
thereby power consumption in suspended state. */
unsigned remote_wakeup_enable:1;
/* Inter-io delay (ns). The chip is picky about access timings; it
expects at least:
150ns delay between consecutive accesses to DATA_REG,
300ns delay between access to ADDR_REG and DATA_REG
OE, WE MUST NOT be changed during these intervals
*/
void (*delay) (struct device * dev, int delay);
};

26
include/linux/usb/sl811.h Normal file
View File

@@ -0,0 +1,26 @@
/*
* board initialization should put one of these into dev->platform_data
* and place the sl811hs onto platform_bus named "sl811-hcd".
*/
struct sl811_platform_data {
unsigned can_wakeup:1;
/* given port_power, msec/2 after power on till power good */
u8 potpg;
/* mA/2 power supplied on this port (max = default = 250) */
u8 power;
/* sl811 relies on an external source of VBUS current */
void (*port_power)(struct device *dev, int is_on);
/* pulse sl811 nRST (probably with a GPIO) */
void (*reset)(struct device *dev);
// some boards need something like these:
// int (*check_overcurrent)(struct device *dev);
// void (*clock_enable)(struct device *dev, int is_on);
};