Merge branch 'spi-5.1' into spi-5.2 for stm32

This commit is contained in:
Mark Brown 2019-03-15 17:06:34 +00:00
commit 3949ba3b37
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
4 changed files with 26 additions and 30 deletions

View File

@ -1501,7 +1501,7 @@ static int spi_imx_transfer(struct spi_device *spi,
/* flush rxfifo before transfer */
while (spi_imx->devtype_data->rx_available(spi_imx))
spi_imx->rx(spi_imx);
readl(spi_imx->base + MXC_CSPIRXDATA);
if (spi_imx->slave_mode)
return spi_imx_pio_transfer_slave(spi, transfer);

View File

@ -271,7 +271,8 @@ static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
/* Sets parity, interrupt mask */
rspi_write8(rspi, 0x00, RSPI_SPCR2);
/* Sets SPCMD */
/* Resets sequencer */
rspi_write8(rspi, 0, RSPI_SPSCR);
rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size);
rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
@ -315,7 +316,8 @@ static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size)
rspi_write8(rspi, 0x00, RSPI_SSLND);
rspi_write8(rspi, 0x00, RSPI_SPND);
/* Sets SPCMD */
/* Resets sequencer */
rspi_write8(rspi, 0, RSPI_SPSCR);
rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size);
rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
@ -366,7 +368,8 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
/* Sets buffer to allow normal operation */
rspi_write8(rspi, 0x00, QSPI_SPBFCR);
/* Sets SPCMD */
/* Resets sequencer */
rspi_write8(rspi, 0, RSPI_SPSCR);
rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
/* Sets RSPI mode */
@ -868,28 +871,6 @@ static int qspi_transfer_one(struct spi_controller *ctlr,
}
}
static int rspi_setup(struct spi_device *spi)
{
struct rspi_data *rspi = spi_controller_get_devdata(spi->controller);
rspi->max_speed_hz = spi->max_speed_hz;
rspi->spcmd = SPCMD_SSLKP;
if (spi->mode & SPI_CPOL)
rspi->spcmd |= SPCMD_CPOL;
if (spi->mode & SPI_CPHA)
rspi->spcmd |= SPCMD_CPHA;
/* CMOS output mode and MOSI signal from previous transfer */
rspi->sppcr = 0;
if (spi->mode & SPI_LOOP)
rspi->sppcr |= SPPCR_SPLP;
set_config_register(rspi, 8);
return 0;
}
static u16 qspi_transfer_mode(const struct spi_transfer *xfer)
{
if (xfer->tx_buf)
@ -959,8 +940,24 @@ static int rspi_prepare_message(struct spi_controller *ctlr,
struct spi_message *msg)
{
struct rspi_data *rspi = spi_controller_get_devdata(ctlr);
struct spi_device *spi = msg->spi;
int ret;
rspi->max_speed_hz = spi->max_speed_hz;
rspi->spcmd = SPCMD_SSLKP;
if (spi->mode & SPI_CPOL)
rspi->spcmd |= SPCMD_CPOL;
if (spi->mode & SPI_CPHA)
rspi->spcmd |= SPCMD_CPHA;
/* CMOS output mode and MOSI signal from previous transfer */
rspi->sppcr = 0;
if (spi->mode & SPI_LOOP)
rspi->sppcr |= SPPCR_SPLP;
set_config_register(rspi, 8);
if (msg->spi->mode &
(SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)) {
/* Setup sequencer for messages with multiple transfer modes */
@ -1267,7 +1264,6 @@ static int rspi_probe(struct platform_device *pdev)
init_waitqueue_head(&rspi->wait);
ctlr->bus_num = pdev->id;
ctlr->setup = rspi_setup;
ctlr->auto_runtime_pm = true;
ctlr->transfer_one = ops->transfer_one;
ctlr->prepare_message = rspi_prepare_message;

View File

@ -76,7 +76,6 @@
#define QSPI_PSMAR 0x28
#define QSPI_PIR 0x2c
#define QSPI_LPTR 0x30
#define LPTR_DFT_TIMEOUT 0x10
#define STM32_QSPI_MAX_MMAP_SZ SZ_256M
#define STM32_QSPI_MAX_NORCHIP 2
@ -372,8 +371,7 @@ static int stm32_qspi_setup(struct spi_device *spi)
flash->presc = presc;
mutex_lock(&qspi->lock);
writel_relaxed(LPTR_DFT_TIMEOUT, qspi->io_base + QSPI_LPTR);
cr = FIELD_PREP(CR_FTHRES_MASK, 3) | CR_TCEN | CR_SSHIFT | CR_EN;
cr = FIELD_PREP(CR_FTHRES_MASK, 3) | CR_SSHIFT | CR_EN;
writel_relaxed(cr, qspi->io_base + QSPI_CR);
/* set dcr fsize to max address */

View File

@ -1039,6 +1039,8 @@ static int spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
if (max_tx || max_rx) {
list_for_each_entry(xfer, &msg->transfers,
transfer_list) {
if (!xfer->len)
continue;
if (!xfer->tx_buf)
xfer->tx_buf = ctlr->dummy_tx;
if (!xfer->rx_buf)