[MIPS] Add support for MIPS CMP platform.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/kernel/sync-r4k.c

@@ -0,0 +1,159 @@
+/*
+ * Count register synchronisation.
+ *
+ * All CPUs will have their count registers synchronised to the CPU0 expirelo
+ * value. This can cause a small timewarp for CPU0. All other CPU's should
+ * not have done anything significant (but they may have had interrupts
+ * enabled briefly - prom_smp_finish() should not be responsible for enabling
+ * interrupts...)
+ *
+ * FIXME: broken for SMTC
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/r4k-timer.h>
+
+#include <asm/atomic.h>
+#include <asm/barrier.h>
+#include <asm/cpumask.h>
+#include <asm/mipsregs.h>
+
+static atomic_t __initdata count_start_flag = ATOMIC_INIT(0);
+static atomic_t __initdata count_count_start = ATOMIC_INIT(0);
+static atomic_t __initdata count_count_stop = ATOMIC_INIT(0);
+
+#define COUNTON	100
+#define NR_LOOPS 5
+
+void __init synchronise_count_master(void)
+{
+	int i;
+	unsigned long flags;
+	unsigned int initcount;
+	int nslaves;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC needs to synchronise per VPE, not per CPU
+	 * ignore for now
+	 */
+	return;
+#endif
+
+	pr_info("Checking COUNT synchronization across %u CPUs: ",
+		num_online_cpus());
+
+	local_irq_save(flags);
+
+	/*
+	 * Notify the slaves that it's time to start
+	 */
+	atomic_set(&count_start_flag, 1);
+	smp_wmb();
+
+	/* Count will be initialised to expirelo for all CPU's */
+	initcount = expirelo;
+
+	/*
+	 * We loop a few times to get a primed instruction cache,
+	 * then the last pass is more or less synchronised and
+	 * the master and slaves each set their cycle counters to a known
+	 * value all at once. This reduces the chance of having random offsets
+	 * between the processors, and guarantees that the maximum
+	 * delay between the cycle counters is never bigger than
+	 * the latency of information-passing (cachelines) between
+	 * two CPUs.
+	 */
+
+	nslaves = num_online_cpus()-1;
+	for (i = 0; i < NR_LOOPS; i++) {
+		/* slaves loop on '!= ncpus' */
+		while (atomic_read(&count_count_start) != nslaves)
+			mb();
+		atomic_set(&count_count_stop, 0);
+		smp_wmb();
+
+		/* this lets the slaves write their count register */
+		atomic_inc(&count_count_start);
+
+		/*
+		 * Everyone initialises count in the last loop:
+		 */
+		if (i == NR_LOOPS-1)
+			write_c0_count(initcount);
+
+		/*
+		 * Wait for all slaves to leave the synchronization point:
+		 */
+		while (atomic_read(&count_count_stop) != nslaves)
+			mb();
+		atomic_set(&count_count_start, 0);
+		smp_wmb();
+		atomic_inc(&count_count_stop);
+	}
+	/* Arrange for an interrupt in a short while */
+	write_c0_compare(read_c0_count() + COUNTON);
+
+	local_irq_restore(flags);
+
+	/*
+	 * i386 code reported the skew here, but the
+	 * count registers were almost certainly out of sync
+	 * so no point in alarming people
+	 */
+	printk("done.\n");
+}
+
+void __init synchronise_count_slave(void)
+{
+	int i;
+	unsigned long flags;
+	unsigned int initcount;
+	int ncpus;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC needs to synchronise per VPE, not per CPU
+	 * ignore for now
+	 */
+	return;
+#endif
+
+	local_irq_save(flags);
+
+	/*
+	 * Not every cpu is online at the time this gets called,
+	 * so we first wait for the master to say everyone is ready
+	 */
+
+	while (!atomic_read(&count_start_flag))
+		mb();
+
+	/* Count will be initialised to expirelo for all CPU's */
+	initcount = expirelo;
+
+	ncpus = num_online_cpus();
+	for (i = 0; i < NR_LOOPS; i++) {
+		atomic_inc(&count_count_start);
+		while (atomic_read(&count_count_start) != ncpus)
+			mb();
+
+		/*
+		 * Everyone initialises count in the last loop:
+		 */
+		if (i == NR_LOOPS-1)
+			write_c0_count(initcount);
+
+		atomic_inc(&count_count_stop);
+		while (atomic_read(&count_count_stop) != ncpus)
+			mb();
+	}
+	/* Arrange for an interrupt in a short while */
+	write_c0_compare(read_c0_count() + COUNTON);
+
+	local_irq_restore(flags);
+}
+#undef NR_LOOPS
+#endif