[media] rtl2830: declare two tables as constant

This optimizes few hundred bytes from data to text segment.
Also remove one unused function that was commented out already.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Antti Palosaari 2012-09-12 20:23:49 -03:00 committed by Mauro Carvalho Chehab
parent 66b3c4deb9
commit 3a2fca2684

View File

@ -28,7 +28,7 @@
#include "rtl2830_priv.h"
/* write multiple hardware registers */
static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, u8 *val, int len)
static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, const u8 *val, int len)
{
int ret;
u8 buf[1+len];
@ -85,7 +85,8 @@ static int rtl2830_rd(struct rtl2830_priv *priv, u8 reg, u8 *val, int len)
}
/* write multiple registers */
static int rtl2830_wr_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len)
static int rtl2830_wr_regs(struct rtl2830_priv *priv, u16 reg, const u8 *val,
int len)
{
int ret;
u8 reg2 = (reg >> 0) & 0xff;
@ -122,14 +123,6 @@ static int rtl2830_rd_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len)
return rtl2830_rd(priv, reg2, val, len);
}
#if 0 /* currently not used */
/* write single register */
static int rtl2830_wr_reg(struct rtl2830_priv *priv, u16 reg, u8 val)
{
return rtl2830_wr_regs(priv, reg, &val, 1);
}
#endif
/* read single register */
static int rtl2830_rd_reg(struct rtl2830_priv *priv, u16 reg, u8 *val)
{
@ -281,7 +274,7 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe)
u64 num;
u8 buf[3], tmp;
u32 if_ctl, if_frequency;
static u8 bw_params1[3][34] = {
static const u8 bw_params1[3][34] = {
{
0x1f, 0xf0, 0x1f, 0xf0, 0x1f, 0xfa, 0x00, 0x17, 0x00, 0x41,
0x00, 0x64, 0x00, 0x67, 0x00, 0x38, 0x1f, 0xde, 0x1f, 0x7a,
@ -299,10 +292,10 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe)
0x04, 0x24, 0x04, 0xdb, /* 8 MHz */
},
};
static u8 bw_params2[3][6] = {
{0xc3, 0x0c, 0x44, 0x33, 0x33, 0x30,}, /* 6 MHz */
{0xb8, 0xe3, 0x93, 0x99, 0x99, 0x98,}, /* 7 MHz */
{0xae, 0xba, 0xf3, 0x26, 0x66, 0x64,}, /* 8 MHz */
static const u8 bw_params2[3][6] = {
{0xc3, 0x0c, 0x44, 0x33, 0x33, 0x30}, /* 6 MHz */
{0xb8, 0xe3, 0x93, 0x99, 0x99, 0x98}, /* 7 MHz */
{0xae, 0xba, 0xf3, 0x26, 0x66, 0x64}, /* 8 MHz */
};
dev_dbg(&priv->i2c->dev,