sh: SH-MobileR SH7722 CPU support.

This adds CPU support for the SH7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/kernel/cpu/Makefile

@@ -6,6 +6,7 @@ obj-$(CONFIG_CPU_SH2)		= sh2/
 obj-$(CONFIG_CPU_SH2A)		= sh2a/
 obj-$(CONFIG_CPU_SH3)		= sh3/
 obj-$(CONFIG_CPU_SH4)		= sh4/
+obj-$(CONFIG_CPU_SH4A)		+= sh4a/
 
 obj-$(CONFIG_UBC_WAKEUP)	+= ubc.o
 obj-$(CONFIG_SH_ADC)		+= adc.o

arch/sh/kernel/cpu/sh4/Makefile

@@ -12,17 +12,12 @@ obj-$(CONFIG_SH_STORE_QUEUES)		+= sq.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7750)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7760)	+= setup-sh7760.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7770)	+= setup-sh7770.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
-obj-$(CONFIG_CPU_SUBTYPE_SH73180)	+= setup-sh73180.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= setup-sh4-202.o
 
 # Primary on-chip clocks (common)
+ifndef CONFIG_CPU_SH4A
 clock-$(CONFIG_CPU_SH4)			:= clock-sh4.o
-clock-$(CONFIG_CPU_SUBTYPE_SH73180)	:= clock-sh73180.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
+endif
 
 # Additional clocks by subtype
 clock-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= clock-sh4-202.o

arch/sh/kernel/cpu/sh4/probe.c

@@ -119,11 +119,20 @@ int __init detect_cpu_and_cache_system(void)
 		break;
 	case 0x3000:
 	case 0x3003:
+	case 0x3009:
 		cpu_data->type = CPU_SH7343;
 		cpu_data->icache.ways = 4;
 		cpu_data->dcache.ways = 4;
 		cpu_data->flags |= CPU_HAS_LLSC;
 		break;
+	case 0x3008:
+		if (prr == 0xa0) {
+			cpu_data->type = CPU_SH7722;
+			cpu_data->icache.ways = 4;
+			cpu_data->dcache.ways = 4;
+			cpu_data->flags |= CPU_HAS_LLSC;
+		}
+		break;
 	case 0x8000:
 		cpu_data->type = CPU_ST40RA;
 		cpu_data->flags |= CPU_HAS_FPU;

arch/sh/kernel/cpu/sh4a/Makefile

@@ -0,0 +1,19 @@
+#
+# Makefile for the Linux/SuperH SH-4 backends.
+#
+
+# CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7770)	+= setup-sh7770.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
+obj-$(CONFIG_CPU_SUBTYPE_SH73180)	+= setup-sh73180.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
+
+# Primary on-chip clocks (common)
+clock-$(CONFIG_CPU_SUBTYPE_SH73180)	:= clock-sh73180.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7343.o
+
+obj-y	+= $(clock-y)

arch/sh/kernel/cpu/sh4a/clock-sh7343.c

@@ -0,0 +1,99 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh7343.c
+ *
+ * SH7343/SH7722 support for the clock framework
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+
+/*
+ * SH7343/SH7722 uses a common set of multipliers and divisors, so this
+ * is quite simple..
+ */
+static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+
+#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1)
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->parent = clk_get(NULL, "cpu_clk");
+}
+
+static void master_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inl(FRQCR) & 0x000f);
+	clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx];
+}
+
+static struct clk_ops sh7343_master_clk_ops = {
+	.init		= master_clk_init,
+	.recalc		= master_clk_recalc,
+};
+
+static void module_clk_init(struct clk *clk)
+{
+	clk->parent = NULL;
+	clk->rate = CONFIG_SH_PCLK_FREQ;
+}
+
+static struct clk_ops sh7343_module_clk_ops = {
+	.init		= module_clk_init,
+};
+
+static void bus_clk_init(struct clk *clk)
+{
+	clk->parent = clk_get(NULL, "cpu_clk");
+}
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f;
+	clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx];
+}
+
+static struct clk_ops sh7343_bus_clk_ops = {
+	.init		= bus_clk_init,
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_init(struct clk *clk)
+{
+	clk->parent = clk_get(NULL, "module_clk");
+	clk->flags |= CLK_RATE_PROPAGATES;
+	clk_set_rate(clk, clk_get_rate(clk));
+}
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f;
+	clk->rate = clk->parent->rate * pll_calc() *
+		multipliers[idx] / divisors[idx];
+}
+
+static struct clk_ops sh7343_cpu_clk_ops = {
+	.init		= cpu_clk_init,
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7343_clk_ops[] = {
+	&sh7343_master_clk_ops,
+	&sh7343_module_clk_ops,
+	&sh7343_bus_clk_ops,
+	&sh7343_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7343_clk_ops))
+		*ops = sh7343_clk_ops[idx];
+}

arch/sh/kernel/cpu/sh4a/setup-sh7722.c

@@ -0,0 +1,76 @@
+/*
+ * SH7722 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xffe00000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 80, 81, 83, 82 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7722_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7722_devices_setup(void)
+{
+	return platform_add_devices(sh7722_devices,
+				    ARRAY_SIZE(sh7722_devices));
+}
+__initcall(sh7722_devices_setup);
+
+static struct ipr_data sh7722_ipr_map[] = {
+	/* IRQ, IPR-idx, shift, prio */
+	{ 16, 0, 12, 2 }, /* TMU0 */
+	{ 17, 0,  8, 2 }, /* TMU1 */
+};
+
+static unsigned long ipr_offsets[] = {
+	0xa4080000, /*  0: IPRA */
+	0xa4080004, /*  1: IPRB */
+	0xa4080008, /*  2: IPRC */
+	0xa408000c, /*  3: IPRD */
+	0xa4080010, /*  4: IPRE */
+	0xa4080014, /*  5: IPRF */
+	0xa4080018, /*  6: IPRG */
+	0xa408001c, /*  7: IPRH */
+	0xa4080020, /*  8: IPRI */
+	0xa4080024, /*  9: IPRJ */
+	0xa4080028, /* 10: IPRK */
+	0xa408002c, /* 11: IPRL */
+};
+
+unsigned int map_ipridx_to_addr(int idx)
+{
+	if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
+		return 0;
+	return ipr_offsets[idx];
+}
+
+void __init init_IRQ_ipr(void)
+{
+	make_ipr_irq(sh7722_ipr_map, ARRAY_SIZE(sh7722_ipr_map));
+}