lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

sfc: Export boot configuration in EEPROM through ethtool

Browse Source 
Extend the SPI device setup code to support this.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Ben Hutchings
2008-09-01 12:47:16 +01:00
committed by Jeff Garzik
parent 4d566063a7
commit 4a5b504d0c
5 changed files with 445 additions and 94 deletions
Download Patch File Download Diff File Expand all files Collapse all files

87
drivers/net/sfc/spi.h
View File

@@ -19,53 +19,48 @@
*
*************************************************************************/
/*
* Commands common to all known devices.
*
#define SPI_WRSR 0x01 /* Write status register */
#define SPI_WRITE 0x02 /* Write data to memory array */
#define SPI_READ 0x03 /* Read data from memory array */
#define SPI_WRDI 0x04 /* Reset write enable latch */
#define SPI_RDSR 0x05 /* Read status register */
#define SPI_WREN 0x06 /* Set write enable latch */
#define SPI_STATUS_WPEN 0x80 /* Write-protect pin enabled */
#define SPI_STATUS_BP2 0x10 /* Block protection bit 2 */
#define SPI_STATUS_BP1 0x08 /* Block protection bit 1 */
#define SPI_STATUS_BP0 0x04 /* Block protection bit 0 */
#define SPI_STATUS_WEN 0x02 /* State of the write enable latch */
#define SPI_STATUS_NRDY 0x01 /* Device busy flag */
/**
* struct efx_spi_device - an Efx SPI (Serial Peripheral Interface) device
* @efx: The Efx controller that owns this device
* @device_id: Controller's id for the device
* @size: Size (in bytes)
* @addr_len: Number of address bytes in read/write commands
* @munge_address: Flag whether addresses should be munged.
* Some devices with 9-bit addresses (e.g. AT25040A EEPROM)
* use bit 3 of the command byte as address bit A8, rather
* than having a two-byte address. If this flag is set, then
* commands should be munged in this way.
* @block_size: Write block size (in bytes).
* Write commands are limited to blocks with this size and alignment.
* @read: Read function for the device
* @write: Write function for the device
*/
struct efx_spi_device {
struct efx_nic *efx;
int device_id;
unsigned int size;
unsigned int addr_len;
unsigned int munge_address:1;
unsigned int block_size;
};
/* Write status register */
#define SPI_WRSR 0x01
/* Write data to memory array */
#define SPI_WRITE 0x02
/* Read data from memory array */
#define SPI_READ 0x03
/* Reset write enable latch */
#define SPI_WRDI 0x04
/* Read status register */
#define SPI_RDSR 0x05
/* Set write enable latch */
#define SPI_WREN 0x06
/* SST: Enable write to status register */
#define SPI_SST_EWSR 0x50
/*
* Status register bits. Not all bits are supported on all devices.
*
*/
/* Write-protect pin enabled */
#define SPI_STATUS_WPEN 0x80
/* Block protection bit 2 */
#define SPI_STATUS_BP2 0x10
/* Block protection bit 1 */
#define SPI_STATUS_BP1 0x08
/* Block protection bit 0 */
#define SPI_STATUS_BP0 0x04
/* State of the write enable latch */
#define SPI_STATUS_WEN 0x02
/* Device busy flag */
#define SPI_STATUS_NRDY 0x01
int falcon_spi_read(const struct efx_spi_device *spi, loff_t start,
size_t len, size_t *retlen, u8 *buffer);
int falcon_spi_write(const struct efx_spi_device *spi, loff_t start,
size_t len, size_t *retlen, const u8 *buffer);
#endif /* EFX_SPI_H */