Merge tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD update from Lee Jones:
 "Changes to existing drivers:
   - checkpatch fixes throughout the subsystem
   - use Regmap to handle IRQs in max77686, extcon-max77693 and
     mc13xxx-core
   - use DMA in rtsx_pcr
   - restrict building on unsupported architectures on timberdale,
     cs5535
   - SPI hardening in cros_ec_spi
   - more robust error handing in asic3, cros_ec, ab8500-debugfs,
     max77686 and pcf50633-core
   - reorder PM runtime and regulator handing during shutdown in arizona
   - enable wakeup in cros_ec_spi
   - unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
     tps65912-spi, wm5110-tables and ab8500-debugfs
   - add regulator handing into suspend() in sec-core
   - remove pointless wrapper functions in extcon-max77693 and
     i2c-cros-ec-tunnel
   - use cross-architecture friendly data sizes in stmpe-i2c, arizona,
     max77686 and tps65910
   - devicetree documentation updates throughout
   - provide power management support in max77686
   - few OF clean-ups in max77686
   - use manged resources in tps6105x

  New drivers/supported devices:
   - add support for s2mpu02 to sec-core
   - add support for Allwinner A32 to sun6i-prcm
   - add support for Maxim 77802 in max77686
   - add support for DA9063 AD in da9063
   - new driver for Intel PMICs (generic) and specifically Crystal Cove

  (Re-)moved drivers ==
   - move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb"

* tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits)
  MAINTAINERS: Update MFD repo location
  mfd: omap-usb-host: Fix improper mask use.
  mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it
  mfd: arizona: Add missing handling for ISRC3 under/overclocked
  mfd: wm5110: Add new interrupt register definitions
  mfd: arizona: Rename thermal shutdown interrupt
  mfd: wm5110: Add in the output done interrupts
  mfd: wm5110: Remove non-existant interrupts
  mfd: tps65912-spi: Remove unused variable
  mfd: htc-i2cpld: Remove unused code
  mfd: da9063: Add support for AD silicon variant
  mfd: arizona: Map MICVDD from extcon device to the Arizona core
  mfd: arizona: Add MICVDD to mapped regulators for wm8997
  mfd: max77686: Ensure device type IDs are architecture agnostic
  mfd: max77686: Add Maxim 77802 PMIC support
  mfd: tps6105x: Use managed resources when allocating memory
  mfd: wm8997-tables: Suppress 'line over 80 chars' warnings
  mfd: kempld-core: Correct a variety of checkpatch warnings
  mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch
  mfd: si476x-cmd: Remedy checkpatch style complains
  ...
This commit is contained in:
Linus Torvalds
2014-08-07 17:17:39 -07:00
94 changed files with 4310 additions and 1438 deletions

View File

@@ -31,6 +31,7 @@
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mpu02.h>
struct s2mps11_info {
unsigned int rdev_num;
@@ -40,11 +41,15 @@ struct s2mps11_info {
int ramp_delay16;
int ramp_delay7810;
int ramp_delay9;
enum sec_device_type dev_type;
/*
* One bit for each S2MPS14 regulator whether the suspend mode
* One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode
* was enabled.
*/
unsigned int s2mps14_suspend_state:30;
unsigned long long s2mps14_suspend_state:35;
/* Array of size rdev_num with GPIO-s for external sleep control */
int *ext_control_gpio;
};
@@ -415,12 +420,24 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
unsigned int val;
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
val = S2MPS14_ENABLE_SUSPEND;
else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
val = S2MPS14_ENABLE_EXT_CONTROL;
else
val = rdev->desc->enable_mask;
switch (s2mps11->dev_type) {
case S2MPS14X:
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
val = S2MPS14_ENABLE_SUSPEND;
else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
val = S2MPS14_ENABLE_EXT_CONTROL;
else
val = rdev->desc->enable_mask;
break;
case S2MPU02:
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
val = S2MPU02_ENABLE_SUSPEND;
else
val = rdev->desc->enable_mask;
break;
default:
return -EINVAL;
};
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val);
@@ -429,12 +446,38 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
{
int ret;
unsigned int val;
unsigned int val, state;
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
int rdev_id = rdev_get_id(rdev);
/* LDO3 should be always on and does not support suspend mode */
if (rdev_get_id(rdev) == S2MPS14_LDO3)
return 0;
/* Below LDO should be always on or does not support suspend mode. */
switch (s2mps11->dev_type) {
case S2MPS14X:
switch (rdev_id) {
case S2MPS14_LDO3:
return 0;
default:
state = S2MPS14_ENABLE_SUSPEND;
break;
};
break;
case S2MPU02:
switch (rdev_id) {
case S2MPU02_LDO13:
case S2MPU02_LDO14:
case S2MPU02_LDO15:
case S2MPU02_LDO17:
case S2MPU02_BUCK7:
state = S2MPU02_DISABLE_SUSPEND;
break;
default:
state = S2MPU02_ENABLE_SUSPEND;
break;
};
break;
default:
return -EINVAL;
};
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
if (ret < 0)
@@ -452,7 +495,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
return 0;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, S2MPS14_ENABLE_SUSPEND);
rdev->desc->enable_mask, state);
}
static struct regulator_ops s2mps14_reg_ops = {
@@ -605,8 +648,7 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
}
static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
struct of_regulator_match *rdata, struct s2mps11_info *s2mps11,
enum sec_device_type dev_type)
struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
{
struct device_node *reg_np;
@@ -617,7 +659,7 @@ static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
}
of_regulator_match(&pdev->dev, reg_np, rdata, s2mps11->rdev_num);
if (dev_type == S2MPS14X)
if (s2mps11->dev_type == S2MPS14X)
s2mps14_pmic_dt_parse_ext_control_gpio(pdev, rdata, s2mps11);
of_node_put(reg_np);
@@ -625,6 +667,238 @@ static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
return 0;
}
static int s2mpu02_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_val, ramp_shift, ramp_reg;
switch (rdev_get_id(rdev)) {
case S2MPU02_BUCK1:
ramp_shift = S2MPU02_BUCK1_RAMP_SHIFT;
break;
case S2MPU02_BUCK2:
ramp_shift = S2MPU02_BUCK2_RAMP_SHIFT;
break;
case S2MPU02_BUCK3:
ramp_shift = S2MPU02_BUCK3_RAMP_SHIFT;
break;
case S2MPU02_BUCK4:
ramp_shift = S2MPU02_BUCK4_RAMP_SHIFT;
break;
default:
return 0;
}
ramp_reg = S2MPU02_REG_RAMP1;
ramp_val = get_ramp_delay(ramp_delay);
return regmap_update_bits(rdev->regmap, ramp_reg,
S2MPU02_BUCK1234_RAMP_MASK << ramp_shift,
ramp_val << ramp_shift);
}
static struct regulator_ops s2mpu02_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = s2mps14_regulator_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_disable = s2mps14_regulator_set_suspend_disable,
};
static struct regulator_ops s2mpu02_buck_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = s2mps14_regulator_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_disable = s2mps14_regulator_set_suspend_disable,
.set_ramp_delay = s2mpu02_set_ramp_delay,
};
#define regulator_desc_s2mpu02_ldo1(num) { \
.name = "LDO"#num, \
.id = S2MPU02_LDO##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_LDO_MIN_900MV, \
.uV_step = S2MPU02_LDO_STEP_12_5MV, \
.linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
.vsel_reg = S2MPU02_REG_L1CTRL, \
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
.enable_reg = S2MPU02_REG_L1CTRL, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_ldo2(num) { \
.name = "LDO"#num, \
.id = S2MPU02_LDO##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_LDO_MIN_1050MV, \
.uV_step = S2MPU02_LDO_STEP_25MV, \
.linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
.vsel_reg = S2MPU02_REG_L2CTRL1, \
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
.enable_reg = S2MPU02_REG_L2CTRL1, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_ldo3(num) { \
.name = "LDO"#num, \
.id = S2MPU02_LDO##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_LDO_MIN_900MV, \
.uV_step = S2MPU02_LDO_STEP_12_5MV, \
.linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_ldo4(num) { \
.name = "LDO"#num, \
.id = S2MPU02_LDO##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_LDO_MIN_1050MV, \
.uV_step = S2MPU02_LDO_STEP_25MV, \
.linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_ldo5(num) { \
.name = "LDO"#num, \
.id = S2MPU02_LDO##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_LDO_MIN_1600MV, \
.uV_step = S2MPU02_LDO_STEP_50MV, \
.linear_min_sel = S2MPU02_LDO_GROUP3_START_SEL, \
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_buck1234(num) { \
.name = "BUCK"#num, \
.id = S2MPU02_BUCK##num, \
.ops = &s2mpu02_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_BUCK1234_MIN_600MV, \
.uV_step = S2MPU02_BUCK1234_STEP_6_25MV, \
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
.linear_min_sel = S2MPU02_BUCK1234_START_SEL, \
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPU02_REG_B1CTRL2 + (num - 1) * 2, \
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
.enable_reg = S2MPU02_REG_B1CTRL1 + (num - 1) * 2, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_buck5(num) { \
.name = "BUCK"#num, \
.id = S2MPU02_BUCK##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_BUCK5_MIN_1081_25MV, \
.uV_step = S2MPU02_BUCK5_STEP_6_25MV, \
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
.linear_min_sel = S2MPU02_BUCK5_START_SEL, \
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPU02_REG_B5CTRL2, \
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
.enable_reg = S2MPU02_REG_B5CTRL1, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_buck6(num) { \
.name = "BUCK"#num, \
.id = S2MPU02_BUCK##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_BUCK6_MIN_1700MV, \
.uV_step = S2MPU02_BUCK6_STEP_2_50MV, \
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
.linear_min_sel = S2MPU02_BUCK6_START_SEL, \
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPU02_REG_B6CTRL2, \
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
.enable_reg = S2MPU02_REG_B6CTRL1, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_buck7(num) { \
.name = "BUCK"#num, \
.id = S2MPU02_BUCK##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_BUCK7_MIN_900MV, \
.uV_step = S2MPU02_BUCK7_STEP_6_25MV, \
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
.linear_min_sel = S2MPU02_BUCK7_START_SEL, \
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPU02_REG_B7CTRL2, \
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
.enable_reg = S2MPU02_REG_B7CTRL1, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
static const struct regulator_desc s2mpu02_regulators[] = {
regulator_desc_s2mpu02_ldo1(1),
regulator_desc_s2mpu02_ldo2(2),
regulator_desc_s2mpu02_ldo4(3),
regulator_desc_s2mpu02_ldo5(4),
regulator_desc_s2mpu02_ldo4(5),
regulator_desc_s2mpu02_ldo3(6),
regulator_desc_s2mpu02_ldo3(7),
regulator_desc_s2mpu02_ldo4(8),
regulator_desc_s2mpu02_ldo5(9),
regulator_desc_s2mpu02_ldo3(10),
regulator_desc_s2mpu02_ldo4(11),
regulator_desc_s2mpu02_ldo5(12),
regulator_desc_s2mpu02_ldo5(13),
regulator_desc_s2mpu02_ldo5(14),
regulator_desc_s2mpu02_ldo5(15),
regulator_desc_s2mpu02_ldo5(16),
regulator_desc_s2mpu02_ldo4(17),
regulator_desc_s2mpu02_ldo5(18),
regulator_desc_s2mpu02_ldo3(19),
regulator_desc_s2mpu02_ldo4(20),
regulator_desc_s2mpu02_ldo5(21),
regulator_desc_s2mpu02_ldo5(22),
regulator_desc_s2mpu02_ldo5(23),
regulator_desc_s2mpu02_ldo4(24),
regulator_desc_s2mpu02_ldo5(25),
regulator_desc_s2mpu02_ldo4(26),
regulator_desc_s2mpu02_ldo5(27),
regulator_desc_s2mpu02_ldo5(28),
regulator_desc_s2mpu02_buck1234(1),
regulator_desc_s2mpu02_buck1234(2),
regulator_desc_s2mpu02_buck1234(3),
regulator_desc_s2mpu02_buck1234(4),
regulator_desc_s2mpu02_buck5(5),
regulator_desc_s2mpu02_buck6(6),
regulator_desc_s2mpu02_buck7(7),
};
static int s2mps11_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
@@ -634,15 +908,14 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
struct s2mps11_info *s2mps11;
int i, ret = 0;
const struct regulator_desc *regulators;
enum sec_device_type dev_type;
s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
GFP_KERNEL);
if (!s2mps11)
return -ENOMEM;
dev_type = platform_get_device_id(pdev)->driver_data;
switch (dev_type) {
s2mps11->dev_type = platform_get_device_id(pdev)->driver_data;
switch (s2mps11->dev_type) {
case S2MPS11X:
s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
regulators = s2mps11_regulators;
@@ -651,8 +924,13 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
regulators = s2mps14_regulators;
break;
case S2MPU02:
s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
regulators = s2mpu02_regulators;
break;
default:
dev_err(&pdev->dev, "Invalid device type: %u\n", dev_type);
dev_err(&pdev->dev, "Invalid device type: %u\n",
s2mps11->dev_type);
return -EINVAL;
};
@@ -686,7 +964,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
for (i = 0; i < s2mps11->rdev_num; i++)
rdata[i].name = regulators[i].name;
ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11, dev_type);
ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11);
if (ret)
goto out;
@@ -739,6 +1017,7 @@ out:
static const struct platform_device_id s2mps11_pmic_id[] = {
{ "s2mps11-pmic", S2MPS11X},
{ "s2mps14-pmic", S2MPS14X},
{ "s2mpu02-pmic", S2MPU02},
{ },
};
MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id);