lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

microblaze: remove early_init_dt_scan_cpus() and phyp_dump_*()

Browse Source 
Microblaze only has one CPU, it isn't SMP at all.  early_init_dt_scan_cpus()
is effectively just a no-op, so remove it.

Microblaze doesn't support hypervisor assisted dump either, so the phyp stuff
can also go.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Michal Simek <monstr@monstr.eu>
This commit is contained in:
Grant Likely
2010-01-28 22:18:56 -07:00
parent 0ada0a7312
commit 5805371405
1 changed files with 0 additions and 153 deletions
Download Patch File Download Diff File Expand all files Collapse all files

153
arch/microblaze/kernel/prom.c
View File

@@ -47,67 +47,6 @@ struct device_node *of_chosen;
#define early_init_dt_scan_drconf_memory(node) 0 #define early_init_dt_scan_drconf_memory(node) 0
static int __init early_init_dt_scan_cpus(unsigned long node,
const char *uname, int depth,
void *data)
{
static int logical_cpuid;
char *type = of_get_flat_dt_prop(node, "device_type", NULL);
const u32 *intserv;
int i, nthreads;
int found = 0;
/* We are scanning "cpu" nodes only */
if (type == NULL || strcmp(type, "cpu") != 0)
return 0;
/* Get physical cpuid */
intserv = of_get_flat_dt_prop(node, "reg", NULL);
nthreads = 1;
/*
* Now see if any of these threads match our boot cpu.
* NOTE: This must match the parsing done in smp_setup_cpu_maps.
*/
for (i = 0; i < nthreads; i++) {
/*
* version 2 of the kexec param format adds the phys cpuid of
* booted proc.
*/
if (initial_boot_params && initial_boot_params->version >= 2) {
if (intserv[i] ==
initial_boot_params->boot_cpuid_phys) {
found = 1;
break;
}
} else {
/*
* Check if it's the boot-cpu, set it's hw index now,
* unfortunately this format did not support booting
* off secondary threads.
*/
if (of_get_flat_dt_prop(node,
"linux,boot-cpu", NULL) != NULL) {
found = 1;
break;
}
}
#ifdef CONFIG_SMP
/* logical cpu id is always 0 on UP kernels */
logical_cpuid++;
#endif
}
if (found) {
pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid,
intserv[i]);
boot_cpuid = logical_cpuid;
}
return 0;
}
void __init early_init_dt_scan_chosen_arch(unsigned long node) void __init early_init_dt_scan_chosen_arch(unsigned long node)
{ {
/* No Microblaze specific code here */ /* No Microblaze specific code here */
@@ -163,86 +102,6 @@ static int __init early_init_dt_scan_memory(unsigned long node,
return 0; return 0;
} }
#ifdef CONFIG_PHYP_DUMP
/**
* phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
*
* Function to find the largest size we need to reserve
* during early boot process.
*
* It either looks for boot param and returns that OR
* returns larger of 256 or 5% rounded down to multiples of 256MB.
*
*/
static inline unsigned long phyp_dump_calculate_reserve_size(void)
{
unsigned long tmp;
if (phyp_dump_info->reserve_bootvar)
return phyp_dump_info->reserve_bootvar;
/* divide by 20 to get 5% of value */
tmp = lmb_end_of_DRAM();
do_div(tmp, 20);
/* round it down in multiples of 256 */
tmp = tmp & ~0x0FFFFFFFUL;
return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
}
/**
* phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
*
* This routine may reserve memory regions in the kernel only
* if the system is supported and a dump was taken in last
* boot instance or if the hardware is supported and the
* scratch area needs to be setup. In other instances it returns
* without reserving anything. The memory in case of dump being
* active is freed when the dump is collected (by userland tools).
*/
static void __init phyp_dump_reserve_mem(void)
{
unsigned long base, size;
unsigned long variable_reserve_size;
if (!phyp_dump_info->phyp_dump_configured) {
printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
return;
}
if (!phyp_dump_info->phyp_dump_at_boot) {
printk(KERN_INFO "Phyp-dump disabled at boot time\n");
return;
}
variable_reserve_size = phyp_dump_calculate_reserve_size();
if (phyp_dump_info->phyp_dump_is_active) {
/* Reserve *everything* above RMR.Area freed by userland tools*/
base = variable_reserve_size;
size = lmb_end_of_DRAM() - base;
/* XXX crashed_ram_end is wrong, since it may be beyond
* the memory_limit, it will need to be adjusted. */
lmb_reserve(base, size);
phyp_dump_info->init_reserve_start = base;
phyp_dump_info->init_reserve_size = size;
} else {
size = phyp_dump_info->cpu_state_size +
phyp_dump_info->hpte_region_size +
variable_reserve_size;
base = lmb_end_of_DRAM() - size;
lmb_reserve(base, size);
phyp_dump_info->init_reserve_start = base;
phyp_dump_info->init_reserve_size = size;
}
}
#else
static inline void __init phyp_dump_reserve_mem(void) {}
#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */
#ifdef CONFIG_EARLY_PRINTK #ifdef CONFIG_EARLY_PRINTK
/* MS this is Microblaze specifig function */ /* MS this is Microblaze specifig function */
static int __init early_init_dt_scan_serial(unsigned long node, static int __init early_init_dt_scan_serial(unsigned long node,
@@ -284,11 +143,6 @@ void __init early_init_devtree(void *params)
/* Setup flat device-tree pointer */ /* Setup flat device-tree pointer */
initial_boot_params = params; initial_boot_params = params;
#ifdef CONFIG_PHYP_DUMP
/* scan tree to see if dump occured during last boot */
of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
#endif
/* Retrieve various informations from the /chosen node of the /* Retrieve various informations from the /chosen node of the
* device-tree, including the platform type, initrd location and * device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ... * size, TCE reserve, and more ...
@@ -308,13 +162,6 @@ void __init early_init_devtree(void *params)
pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size()); pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
pr_debug("Scanning CPUs ...\n");
/* Retreive CPU related informations from the flat tree
* (altivec support, boot CPU ID, ...)
*/
of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
pr_debug(" <- early_init_devtree()\n"); pr_debug(" <- early_init_devtree()\n");
} }