lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

e1000e: refactor PHY ID detection workaround

Browse Source 
The workaround that detects the correct PHY ID when an initial read of the
PHY ID registers returns an invalid one should retry up to ten times with
a small delay between attempts using a single PHY address and then repeat
using the remaining possible PHY addresses.  Do this instead of trying each
possible PHY address repeating that up to 100 times.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Bruce Allan
2009-12-02 17:02:43 +00:00
committed by David S. Miller
parent 94e5b65159
commit 5eb6f3c70f
2 changed files with 17 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/net/e1000e/hw.h
View File

@@ -219,7 +219,7 @@ enum e1e_registers {
E1000_HICR = 0x08F00, /* Host Interface Control */
};
/* RSS registers */
#define E1000_MAX_PHY_ADDR 4
/* IGP01E1000 Specific Registers */
#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */

18
drivers/net/e1000e/phy.c
View File

@@ -2198,12 +2198,16 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw)
{
s32 ret_val = -E1000_ERR_PHY_TYPE;
u32 phy_addr = 0;
u32 i = 0;
u32 i;
enum e1000_phy_type phy_type = e1000_phy_unknown;
do {
for (phy_addr = 0; phy_addr < 4; phy_addr++) {
hw->phy.id = phy_type;
for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
hw->phy.addr = phy_addr;
i = 0;
do {
e1000e_get_phy_id(hw);
phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
@@ -2213,12 +2217,14 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw)
*/
if (phy_type != e1000_phy_unknown) {
ret_val = 0;
break;
}
goto out;
}
msleep(1);
i++;
} while ((ret_val != 0) && (i < 100));
} while (i < 10);
}
out:
return ret_val;
}