Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6

* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6:
  of_mdio: Don't phy_scan_fixups() twice
  Devicetree: Expand on ARM Primecell binding documentation
  dt: Add empty of_match_node() macro
  dt: add empty dt helpers for non-dt build
  devicetree: fix build error on drivers/tty/serial/altera_jtaguart.c
  devicetree: Add ARM pl022 spi controller binding doc
  devicetree: Add ARM pl061 gpio controller binding doc
  of/irq: of_irq_find_parent: check for parent equal to child
  MAINTAINERS: update devicetree maintainers
  dt: add helper to read 64-bit integers
  tty: use of_match_ptr() for of_match_table entry
  OF: Add of_match_ptr() macro
  dt: add empty for_each_child_of_node, of_find_property
  devicetree: Document Qualcomm and Atmel prefixes
  serial/imx: add of_alias_get_id() reference back
  dt: add of_alias_scan and of_alias_get_id
  devicetree: Add a registry of vendor prefixes

Documentation/devicetree/bindings/arm/primecell.txt

@@ -6,7 +6,9 @@ driver matching.
 
 Required properties:
 
-- compatible : should be a specific value for peripheral and "arm,primecell"
+- compatible : should be a specific name for the peripheral and
+               "arm,primecell".  The specific name will match the ARM
+               engineering name for the logic block in the form: "arm,pl???"
 
 Optional properties:
 

Documentation/devicetree/bindings/gpio/pl061-gpio.txt

@@ -0,0 +1,10 @@
+ARM PL061 GPIO controller
+
+Required properties:
+- compatible : "arm,pl061", "arm,primecell"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters:
+  - bit 0 specifies polarity (0 for normal, 1 for inverted)
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupts : Interrupt mapping for GPIO IRQ.
+

Documentation/devicetree/bindings/spi/spi_pl022.txt

@@ -0,0 +1,12 @@
+ARM PL022 SPI controller
+
+Required properties:
+- compatible : "arm,pl022", "arm,primecell"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain SPI controller interrupt
+
+Optional properties:
+- cs-gpios : should specify GPIOs used for chipselects.
+  The gpios will be referred to as reg = <index> in the SPI child nodes.
+  If unspecified, a single SPI device without a chip select can be used.
+

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -0,0 +1,40 @@
+Device tree binding vendor prefix registry.  Keep list in alphabetical order.
+
+This isn't an exhaustive list, but you should add new prefixes to it before
+using them to avoid name-space collisions.
+
+adi	Analog Devices, Inc.
+amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
+apm	Applied Micro Circuits Corporation (APM)
+arm	ARM Ltd.
+atmel	Atmel Corporation
+chrp	Common Hardware Reference Platform
+dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
+denx	Denx Software Engineering
+epson	Seiko Epson Corp.
+est	ESTeem Wireless Modems
+fsl	Freescale Semiconductor
+GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+hp	Hewlett Packard
+ibm	International Business Machines (IBM)
+idt	Integrated Device Technologies, Inc.
+intercontrol	Inter Control Group
+linux	Linux-specific binding
+marvell	Marvell Technology Group Ltd.
+maxim	Maxim Integrated Products
+mosaixtech	Mosaix Technologies, Inc.
+national	National Semiconductor
+nintendo	Nintendo
+nvidia	NVIDIA
+nxp	NXP Semiconductors
+powervr	Imagination Technologies
+qcom	Qualcomm, Inc.
+ramtron	Ramtron International
+samsung	Samsung Semiconductor
+schindler	Schindler
+simtek
+sirf	SiRF Technology, Inc.
+stericsson	ST-Ericsson
+ti	Texas Instruments
+xlnx	Xilinx