e1000: handle manageability for pci-e adapters at PHY powerdown

When powering down the PHY (if WoL is disabled) we should only check
copper PHY's and handle PCI-E adapters differently.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
This commit is contained in:
Bruce Allan 2006-09-27 12:53:54 -07:00 committed by Auke Kok
parent 09ae3e8866
commit 61c2505fd5

View File

@ -512,25 +512,48 @@ void e1000_power_up_phy(struct e1000_adapter *adapter)
static void e1000_power_down_phy(struct e1000_adapter *adapter)
{
boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) &&
e1000_check_mng_mode(&adapter->hw);
/* Power down the PHY so no link is implied when interface is down
* The PHY cannot be powered down if any of the following is TRUE
/* Power down the PHY so no link is implied when interface is down *
* The PHY cannot be powered down if any of the following is TRUE *
* (a) WoL is enabled
* (b) AMT is active
* (c) SoL/IDER session is active */
if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
adapter->hw.mac_type != e1000_ich8lan &&
adapter->hw.media_type == e1000_media_type_copper &&
!(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
!mng_mode_enabled &&
!e1000_check_phy_reset_block(&adapter->hw)) {
adapter->hw.media_type == e1000_media_type_copper) {
uint16_t mii_reg = 0;
switch (adapter->hw.mac_type) {
case e1000_82540:
case e1000_82545:
case e1000_82545_rev_3:
case e1000_82546:
case e1000_82546_rev_3:
case e1000_82541:
case e1000_82541_rev_2:
case e1000_82547:
case e1000_82547_rev_2:
if (E1000_READ_REG(&adapter->hw, MANC) &
E1000_MANC_SMBUS_EN)
goto out;
break;
case e1000_82571:
case e1000_82572:
case e1000_82573:
case e1000_80003es2lan:
case e1000_ich8lan:
if (e1000_check_mng_mode(&adapter->hw) ||
e1000_check_phy_reset_block(&adapter->hw))
goto out;
break;
default:
goto out;
}
e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
mii_reg |= MII_CR_POWER_DOWN;
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
mdelay(1);
}
out:
return;
}
void