lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

[SCSI] scsi: t128 scsi_cmnd convertion

Browse Source 
Changes the obsolete Scsi_Cmnd to struct scsi_cmnd and remove the trailing
whitespaces.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
Henne
2006-11-08 19:56:28 -08:00
committed by James Bottomley
parent 297295ae66
commit 667c667f86
1 changed files with 20 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files

39
drivers/scsi/t128.h
View File

@@ -8,20 +8,20 @@
* drew@colorado.edu * drew@colorado.edu
* +1 (303) 440-4894 * +1 (303) 440-4894
* *
* DISTRIBUTION RELEASE 3. * DISTRIBUTION RELEASE 3.
* *
* For more information, please consult * For more information, please consult
* *
* Trantor Systems, Ltd. * Trantor Systems, Ltd.
* T128/T128F/T228 SCSI Host Adapter * T128/T128F/T228 SCSI Host Adapter
* Hardware Specifications * Hardware Specifications
* *
* Trantor Systems, Ltd. * Trantor Systems, Ltd.
* 5415 Randall Place * 5415 Randall Place
* Fremont, CA 94538 * Fremont, CA 94538
* 1+ (415) 770-1400, FAX 1+ (415) 770-9910 * 1+ (415) 770-1400, FAX 1+ (415) 770-9910
* *
* and * and
* *
* NCR 5380 Family * NCR 5380 Family
* SCSI Protocol Controller * SCSI Protocol Controller
@@ -48,15 +48,15 @@
#define TDEBUG_TRANSFER 0x2 #define TDEBUG_TRANSFER 0x2
/* /*
* The trantor boards are memory mapped. They use an NCR5380 or * The trantor boards are memory mapped. They use an NCR5380 or
* equivalent (my sample board had part second sourced from ZILOG). * equivalent (my sample board had part second sourced from ZILOG).
* NCR's recommended "Pseudo-DMA" architecture is used, where * NCR's recommended "Pseudo-DMA" architecture is used, where
* a PAL drives the DMA signals on the 5380 allowing fast, blind * a PAL drives the DMA signals on the 5380 allowing fast, blind
* transfers with proper handshaking. * transfers with proper handshaking.
*/ */
/* /*
* Note : a boot switch is provided for the purpose of informing the * Note : a boot switch is provided for the purpose of informing the
* firmware to boot or not boot from attached SCSI devices. So, I imagine * firmware to boot or not boot from attached SCSI devices. So, I imagine
* there are fewer people who've yanked the ROM like they do on the Seagate * there are fewer people who've yanked the ROM like they do on the Seagate
* to make bootup faster, and I'll probably use this for autodetection. * to make bootup faster, and I'll probably use this for autodetection.
@@ -92,19 +92,20 @@
#define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */ #define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */
#ifndef ASM #ifndef ASM
static int t128_abort(Scsi_Cmnd *); static int t128_abort(struct scsi_cmnd *);
static int t128_biosparam(struct scsi_device *, struct block_device *, static int t128_biosparam(struct scsi_device *, struct block_device *,
sector_t, int*); sector_t, int*);
static int t128_detect(struct scsi_host_template *); static int t128_detect(struct scsi_host_template *);
static int t128_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); static int t128_queue_command(struct scsi_cmnd *,
static int t128_bus_reset(Scsi_Cmnd *); void (*done)(struct scsi_cmnd *));
static int t128_bus_reset(struct scsi_cmnd *);
#ifndef CMD_PER_LUN #ifndef CMD_PER_LUN
#define CMD_PER_LUN 2 #define CMD_PER_LUN 2
#endif #endif
#ifndef CAN_QUEUE #ifndef CAN_QUEUE
#define CAN_QUEUE 32 #define CAN_QUEUE 32
#endif #endif
#ifndef HOSTS_C #ifndef HOSTS_C
@@ -120,7 +121,7 @@ static int t128_bus_reset(Scsi_Cmnd *);
#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20)) #define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))
#if !(TDEBUG & TDEBUG_TRANSFER) #if !(TDEBUG & TDEBUG_TRANSFER)
#define NCR5380_read(reg) readb(T128_address(reg)) #define NCR5380_read(reg) readb(T128_address(reg))
#define NCR5380_write(reg, value) writeb((value),(T128_address(reg))) #define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
#else #else
@@ -129,7 +130,7 @@ static int t128_bus_reset(Scsi_Cmnd *);
, instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg))) , instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg)))
#define NCR5380_write(reg, value) { \ #define NCR5380_write(reg, value) { \
printk("scsi%d : write %02x to register %d at address %08x\n", \ printk("scsi%d : write %02x to register %d at address %08x\n", \
instance->hostno, (value), (reg), T128_address(reg)); \ instance->hostno, (value), (reg), T128_address(reg)); \
writeb((value), (T128_address(reg))); \ writeb((value), (T128_address(reg))); \
} }
@@ -142,10 +143,10 @@ static int t128_bus_reset(Scsi_Cmnd *);
#define NCR5380_bus_reset t128_bus_reset #define NCR5380_bus_reset t128_bus_reset
#define NCR5380_proc_info t128_proc_info #define NCR5380_proc_info t128_proc_info
/* 15 14 12 10 7 5 3 /* 15 14 12 10 7 5 3
1101 0100 1010 1000 */ 1101 0100 1010 1000 */
#define T128_IRQS 0xc4a8 #define T128_IRQS 0xc4a8
#endif /* else def HOSTS_C */ #endif /* else def HOSTS_C */
#endif /* ndef ASM */ #endif /* ndef ASM */