[libata] Add a bunch of PATA drivers.
The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Jeff Garzik
587
drivers/ata/pata_serverworks.c
Normal file
587
drivers/ata/pata_serverworks.c
Normal file
@@ -0,0 +1,587 @@
|
||||
/*
|
||||
* ata-serverworks.c - Serverworks PATA for new ATA layer
|
||||
* (C) 2005 Red Hat Inc
|
||||
* Alan Cox <alan@redhat.com>
|
||||
*
|
||||
* based upon
|
||||
*
|
||||
* serverworks.c
|
||||
*
|
||||
* Copyright (C) 1998-2000 Michel Aubry
|
||||
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz
|
||||
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
|
||||
* Portions copyright (c) 2001 Sun Microsystems
|
||||
*
|
||||
*
|
||||
* RCC/ServerWorks IDE driver for Linux
|
||||
*
|
||||
* OSB4: `Open South Bridge' IDE Interface (fn 1)
|
||||
* supports UDMA mode 2 (33 MB/s)
|
||||
*
|
||||
* CSB5: `Champion South Bridge' IDE Interface (fn 1)
|
||||
* all revisions support UDMA mode 4 (66 MB/s)
|
||||
* revision A2.0 and up support UDMA mode 5 (100 MB/s)
|
||||
*
|
||||
* *** The CSB5 does not provide ANY register ***
|
||||
* *** to detect 80-conductor cable presence. ***
|
||||
*
|
||||
* CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
|
||||
*
|
||||
* Documentation:
|
||||
* Available under NDA only. Errata info very hard to get.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/blkdev.h>
|
||||
#include <linux/delay.h>
|
||||
#include <scsi/scsi_host.h>
|
||||
#include <linux/libata.h>
|
||||
|
||||
#define DRV_NAME "pata_serverworks"
|
||||
#define DRV_VERSION "0.3.6"
|
||||
|
||||
#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
|
||||
#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
|
||||
|
||||
/* Seagate Barracuda ATA IV Family drives in UDMA mode 5
|
||||
* can overrun their FIFOs when used with the CSB5 */
|
||||
|
||||
static const char *csb_bad_ata100[] = {
|
||||
"ST320011A",
|
||||
"ST340016A",
|
||||
"ST360021A",
|
||||
"ST380021A",
|
||||
NULL
|
||||
};
|
||||
|
||||
/**
|
||||
* dell_cable - Dell serverworks cable detection
|
||||
* @ap: ATA port to do cable detect
|
||||
*
|
||||
* Dell hide the 40/80 pin select for their interfaces in the top two
|
||||
* bits of the subsystem ID.
|
||||
*/
|
||||
|
||||
static int dell_cable(struct ata_port *ap) {
|
||||
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
||||
|
||||
if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
|
||||
return ATA_CBL_PATA80;
|
||||
return ATA_CBL_PATA40;
|
||||
}
|
||||
|
||||
/**
|
||||
* sun_cable - Sun Cobalt 'Alpine' cable detection
|
||||
* @ap: ATA port to do cable select
|
||||
*
|
||||
* Cobalt CSB5 IDE hides the 40/80pin in the top two bits of the
|
||||
* subsystem ID the same as dell. We could use one function but we may
|
||||
* need to extend the Dell one in future
|
||||
*/
|
||||
|
||||
static int sun_cable(struct ata_port *ap) {
|
||||
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
||||
|
||||
if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
|
||||
return ATA_CBL_PATA80;
|
||||
return ATA_CBL_PATA40;
|
||||
}
|
||||
|
||||
/**
|
||||
* osb4_cable - OSB4 cable detect
|
||||
* @ap: ATA port to check
|
||||
*
|
||||
* The OSB4 isn't UDMA66 capable so this is easy
|
||||
*/
|
||||
|
||||
static int osb4_cable(struct ata_port *ap) {
|
||||
return ATA_CBL_PATA40;
|
||||
}
|
||||
|
||||
/**
|
||||
* csb4_cable - CSB5/6 cable detect
|
||||
* @ap: ATA port to check
|
||||
*
|
||||
* Serverworks default arrangement is to use the drive side detection
|
||||
* only.
|
||||
*/
|
||||
|
||||
static int csb_cable(struct ata_port *ap) {
|
||||
return ATA_CBL_PATA80;
|
||||
}
|
||||
|
||||
struct sv_cable_table {
|
||||
int device;
|
||||
int subvendor;
|
||||
int (*cable_detect)(struct ata_port *ap);
|
||||
};
|
||||
|
||||
/*
|
||||
* Note that we don't copy the old serverworks code because the old
|
||||
* code contains obvious mistakes
|
||||
*/
|
||||
|
||||
static struct sv_cable_table cable_detect[] = {
|
||||
{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable },
|
||||
{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable },
|
||||
{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable },
|
||||
{ PCI_DEVICE_ID_SERVERWORKS_OSB4, PCI_ANY_ID, osb4_cable },
|
||||
{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, csb_cable },
|
||||
{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, csb_cable },
|
||||
{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, csb_cable },
|
||||
{ PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, csb_cable },
|
||||
{ }
|
||||
};
|
||||
|
||||
/**
|
||||
* serverworks_pre_reset - cable detection
|
||||
* @ap: ATA port
|
||||
*
|
||||
* Perform cable detection according to the device and subvendor
|
||||
* identifications
|
||||
*/
|
||||
|
||||
static int serverworks_pre_reset(struct ata_port *ap) {
|
||||
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
||||
struct sv_cable_table *cb = cable_detect;
|
||||
|
||||
while(cb->device) {
|
||||
if (cb->device == pdev->device &&
|
||||
(cb->subvendor == pdev->subsystem_vendor ||
|
||||
cb->subvendor == PCI_ANY_ID)) {
|
||||
ap->cbl = cb->cable_detect(ap);
|
||||
return ata_std_prereset(ap);
|
||||
}
|
||||
cb++;
|
||||
}
|
||||
|
||||
BUG();
|
||||
return -1; /* kill compiler warning */
|
||||
}
|
||||
|
||||
static void serverworks_error_handler(struct ata_port *ap)
|
||||
{
|
||||
return ata_bmdma_drive_eh(ap, serverworks_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
|
||||
}
|
||||
|
||||
/**
|
||||
* serverworks_is_csb - Check for CSB or OSB
|
||||
* @pdev: PCI device to check
|
||||
*
|
||||
* Returns true if the device being checked is known to be a CSB
|
||||
* series device.
|
||||
*/
|
||||
|
||||
static u8 serverworks_is_csb(struct pci_dev *pdev)
|
||||
{
|
||||
switch (pdev->device) {
|
||||
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
|
||||
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
|
||||
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
|
||||
case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
|
||||
return 1;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* serverworks_osb4_filter - mode selection filter
|
||||
* @ap: ATA interface
|
||||
* @adev: ATA device
|
||||
*
|
||||
* Filter the offered modes for the device to apply controller
|
||||
* specific rules. OSB4 requires no UDMA for disks due to a FIFO
|
||||
* bug we hit.
|
||||
*/
|
||||
|
||||
static unsigned long serverworks_osb4_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
|
||||
{
|
||||
if (adev->class == ATA_DEV_ATA)
|
||||
mask &= ~ATA_MASK_UDMA;
|
||||
return ata_pci_default_filter(ap, adev, mask);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* serverworks_csb_filter - mode selection filter
|
||||
* @ap: ATA interface
|
||||
* @adev: ATA device
|
||||
*
|
||||
* Check the blacklist and disable UDMA5 if matched
|
||||
*/
|
||||
|
||||
static unsigned long serverworks_csb_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
|
||||
{
|
||||
const char *p;
|
||||
char model_num[40];
|
||||
int len, i;
|
||||
|
||||
/* Disk, UDMA */
|
||||
if (adev->class != ATA_DEV_ATA)
|
||||
return ata_pci_default_filter(ap, adev, mask);
|
||||
|
||||
/* Actually do need to check */
|
||||
ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num));
|
||||
/* Precuationary - why not do this in the libata core ?? */
|
||||
|
||||
len = strlen(model_num);
|
||||
while ((len > 0) && (model_num[len - 1] == ' ')) {
|
||||
len--;
|
||||
model_num[len] = 0;
|
||||
}
|
||||
|
||||
for(i = 0; (p = csb_bad_ata100[i]) != NULL; i++) {
|
||||
if (!strncmp(p, model_num, len))
|
||||
mask &= ~(0x1F << ATA_SHIFT_UDMA);
|
||||
}
|
||||
return ata_pci_default_filter(ap, adev, mask);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* serverworks_set_piomode - set initial PIO mode data
|
||||
* @ap: ATA interface
|
||||
* @adev: ATA device
|
||||
*
|
||||
* Program the OSB4/CSB5 timing registers for PIO. The PIO register
|
||||
* load is done as a simple lookup.
|
||||
*/
|
||||
static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
||||
{
|
||||
static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
|
||||
int offset = 1 + (2 * ap->port_no) - adev->devno;
|
||||
int devbits = (2 * ap->port_no + adev->devno) * 4;
|
||||
u16 csb5_pio;
|
||||
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
||||
int pio = adev->pio_mode - XFER_PIO_0;
|
||||
|
||||
pci_write_config_byte(pdev, 0x40 + offset, pio_mode[pio]);
|
||||
|
||||
/* The OSB4 just requires the timing but the CSB series want the
|
||||
mode number as well */
|
||||
if (serverworks_is_csb(pdev)) {
|
||||
pci_read_config_word(pdev, 0x4A, &csb5_pio);
|
||||
csb5_pio &= ~(0x0F << devbits);
|
||||
pci_write_config_byte(pdev, 0x4A, csb5_pio | (pio << devbits));
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* serverworks_set_dmamode - set initial DMA mode data
|
||||
* @ap: ATA interface
|
||||
* @adev: ATA device
|
||||
*
|
||||
* Program the MWDMA/UDMA modes for the serverworks OSB4/CSB5
|
||||
* chipset. The MWDMA mode values are pulled from a lookup table
|
||||
* while the chipset uses mode number for UDMA.
|
||||
*/
|
||||
|
||||
static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
||||
{
|
||||
static const u8 dma_mode[] = { 0x77, 0x21, 0x20 };
|
||||
int offset = 1 + 2 * ap->port_no - adev->devno;
|
||||
int devbits = (2 * ap->port_no + adev->devno);
|
||||
u8 ultra;
|
||||
u8 ultra_cfg;
|
||||
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
||||
|
||||
pci_read_config_byte(pdev, 0x54, &ultra_cfg);
|
||||
|
||||
if (adev->dma_mode >= XFER_UDMA_0) {
|
||||
pci_write_config_byte(pdev, 0x44 + offset, 0x20);
|
||||
|
||||
pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra);
|
||||
ultra &= ~(0x0F << (ap->port_no * 4));
|
||||
ultra |= (adev->dma_mode - XFER_UDMA_0)
|
||||
<< (ap->port_no * 4);
|
||||
pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra);
|
||||
|
||||
ultra_cfg |= (1 << devbits);
|
||||
} else {
|
||||
pci_write_config_byte(pdev, 0x44 + offset,
|
||||
dma_mode[adev->dma_mode - XFER_MW_DMA_0]);
|
||||
ultra_cfg &= ~(1 << devbits);
|
||||
}
|
||||
pci_write_config_byte(pdev, 0x54, ultra_cfg);
|
||||
}
|
||||
|
||||
static struct scsi_host_template serverworks_sht = {
|
||||
.module = THIS_MODULE,
|
||||
.name = DRV_NAME,
|
||||
.ioctl = ata_scsi_ioctl,
|
||||
.queuecommand = ata_scsi_queuecmd,
|
||||
.can_queue = ATA_DEF_QUEUE,
|
||||
.this_id = ATA_SHT_THIS_ID,
|
||||
.sg_tablesize = LIBATA_MAX_PRD,
|
||||
.max_sectors = ATA_MAX_SECTORS,
|
||||
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
||||
.emulated = ATA_SHT_EMULATED,
|
||||
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
||||
.proc_name = DRV_NAME,
|
||||
.dma_boundary = ATA_DMA_BOUNDARY,
|
||||
.slave_configure = ata_scsi_slave_config,
|
||||
.bios_param = ata_std_bios_param,
|
||||
};
|
||||
|
||||
static struct ata_port_operations serverworks_osb4_port_ops = {
|
||||
.port_disable = ata_port_disable,
|
||||
.set_piomode = serverworks_set_piomode,
|
||||
.set_dmamode = serverworks_set_dmamode,
|
||||
.mode_filter = serverworks_osb4_filter,
|
||||
|
||||
.tf_load = ata_tf_load,
|
||||
.tf_read = ata_tf_read,
|
||||
.check_status = ata_check_status,
|
||||
.exec_command = ata_exec_command,
|
||||
.dev_select = ata_std_dev_select,
|
||||
|
||||
.freeze = ata_bmdma_freeze,
|
||||
.thaw = ata_bmdma_thaw,
|
||||
.error_handler = serverworks_error_handler,
|
||||
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
||||
|
||||
.bmdma_setup = ata_bmdma_setup,
|
||||
.bmdma_start = ata_bmdma_start,
|
||||
.bmdma_stop = ata_bmdma_stop,
|
||||
.bmdma_status = ata_bmdma_status,
|
||||
|
||||
.qc_prep = ata_qc_prep,
|
||||
.qc_issue = ata_qc_issue_prot,
|
||||
.eng_timeout = ata_eng_timeout,
|
||||
.data_xfer = ata_pio_data_xfer,
|
||||
|
||||
.irq_handler = ata_interrupt,
|
||||
.port_start = ata_port_start,
|
||||
.port_stop = ata_port_stop,
|
||||
.host_stop = ata_host_stop
|
||||
};
|
||||
|
||||
static struct ata_port_operations serverworks_csb_port_ops = {
|
||||
.port_disable = ata_port_disable,
|
||||
.set_piomode = serverworks_set_piomode,
|
||||
.set_dmamode = serverworks_set_dmamode,
|
||||
.mode_filter = serverworks_csb_filter,
|
||||
|
||||
.tf_load = ata_tf_load,
|
||||
.tf_read = ata_tf_read,
|
||||
.check_status = ata_check_status,
|
||||
.exec_command = ata_exec_command,
|
||||
.dev_select = ata_std_dev_select,
|
||||
|
||||
.freeze = ata_bmdma_freeze,
|
||||
.thaw = ata_bmdma_thaw,
|
||||
.error_handler = serverworks_error_handler,
|
||||
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
||||
|
||||
.bmdma_setup = ata_bmdma_setup,
|
||||
.bmdma_start = ata_bmdma_start,
|
||||
.bmdma_stop = ata_bmdma_stop,
|
||||
.bmdma_status = ata_bmdma_status,
|
||||
|
||||
.qc_prep = ata_qc_prep,
|
||||
.qc_issue = ata_qc_issue_prot,
|
||||
.eng_timeout = ata_eng_timeout,
|
||||
.data_xfer = ata_pio_data_xfer,
|
||||
|
||||
.irq_handler = ata_interrupt,
|
||||
.port_start = ata_port_start,
|
||||
.port_stop = ata_port_stop,
|
||||
.host_stop = ata_host_stop
|
||||
};
|
||||
|
||||
static int serverworks_fixup_osb4(struct pci_dev *pdev)
|
||||
{
|
||||
u32 reg;
|
||||
struct pci_dev *isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
|
||||
PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
|
||||
if (isa_dev) {
|
||||
pci_read_config_dword(isa_dev, 0x64, ®);
|
||||
reg &= ~0x00002000; /* disable 600ns interrupt mask */
|
||||
if (!(reg & 0x00004000))
|
||||
printk(KERN_DEBUG DRV_NAME ": UDMA not BIOS enabled.\n");
|
||||
reg |= 0x00004000; /* enable UDMA/33 support */
|
||||
pci_write_config_dword(isa_dev, 0x64, reg);
|
||||
pci_dev_put(isa_dev);
|
||||
return 0;
|
||||
}
|
||||
printk(KERN_WARNING "ata_serverworks: Unable to find bridge.\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
static int serverworks_fixup_csb(struct pci_dev *pdev)
|
||||
{
|
||||
u8 rev;
|
||||
u8 btr;
|
||||
|
||||
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
|
||||
|
||||
/* Third Channel Test */
|
||||
if (!(PCI_FUNC(pdev->devfn) & 1)) {
|
||||
struct pci_dev * findev = NULL;
|
||||
u32 reg4c = 0;
|
||||
findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
|
||||
PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL);
|
||||
if (findev) {
|
||||
pci_read_config_dword(findev, 0x4C, ®4c);
|
||||
reg4c &= ~0x000007FF;
|
||||
reg4c |= 0x00000040;
|
||||
reg4c |= 0x00000020;
|
||||
pci_write_config_dword(findev, 0x4C, reg4c);
|
||||
pci_dev_put(findev);
|
||||
}
|
||||
} else {
|
||||
struct pci_dev * findev = NULL;
|
||||
u8 reg41 = 0;
|
||||
|
||||
findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
|
||||
PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL);
|
||||
if (findev) {
|
||||
pci_read_config_byte(findev, 0x41, ®41);
|
||||
reg41 &= ~0x40;
|
||||
pci_write_config_byte(findev, 0x41, reg41);
|
||||
pci_dev_put(findev);
|
||||
}
|
||||
}
|
||||
/* setup the UDMA Control register
|
||||
*
|
||||
* 1. clear bit 6 to enable DMA
|
||||
* 2. enable DMA modes with bits 0-1
|
||||
* 00 : legacy
|
||||
* 01 : udma2
|
||||
* 10 : udma2/udma4
|
||||
* 11 : udma2/udma4/udma5
|
||||
*/
|
||||
pci_read_config_byte(pdev, 0x5A, &btr);
|
||||
btr &= ~0x40;
|
||||
if (!(PCI_FUNC(pdev->devfn) & 1))
|
||||
btr |= 0x2;
|
||||
else
|
||||
btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
|
||||
pci_write_config_byte(pdev, 0x5A, btr);
|
||||
|
||||
return btr;
|
||||
}
|
||||
|
||||
static void serverworks_fixup_ht1000(struct pci_dev *pdev)
|
||||
{
|
||||
u8 btr;
|
||||
/* Setup HT1000 SouthBridge Controller - Single Channel Only */
|
||||
pci_read_config_byte(pdev, 0x5A, &btr);
|
||||
btr &= ~0x40;
|
||||
btr |= 0x3;
|
||||
pci_write_config_byte(pdev, 0x5A, btr);
|
||||
}
|
||||
|
||||
|
||||
static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
|
||||
{
|
||||
int ports = 2;
|
||||
static struct ata_port_info info[4] = {
|
||||
{ /* OSB4 */
|
||||
.sht = &serverworks_sht,
|
||||
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
||||
.pio_mask = 0x1f,
|
||||
.mwdma_mask = 0x07,
|
||||
.udma_mask = 0x07,
|
||||
.port_ops = &serverworks_osb4_port_ops
|
||||
}, { /* OSB4 no UDMA */
|
||||
.sht = &serverworks_sht,
|
||||
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
||||
.pio_mask = 0x1f,
|
||||
.mwdma_mask = 0x07,
|
||||
.udma_mask = 0x00,
|
||||
.port_ops = &serverworks_osb4_port_ops
|
||||
}, { /* CSB5 */
|
||||
.sht = &serverworks_sht,
|
||||
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
||||
.pio_mask = 0x1f,
|
||||
.mwdma_mask = 0x07,
|
||||
.udma_mask = 0x1f,
|
||||
.port_ops = &serverworks_csb_port_ops
|
||||
}, { /* CSB5 - later revisions*/
|
||||
.sht = &serverworks_sht,
|
||||
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
||||
.pio_mask = 0x1f,
|
||||
.mwdma_mask = 0x07,
|
||||
.udma_mask = 0x3f,
|
||||
.port_ops = &serverworks_csb_port_ops
|
||||
}
|
||||
};
|
||||
static struct ata_port_info *port_info[2];
|
||||
struct ata_port_info *devinfo = &info[id->driver_data];
|
||||
|
||||
/* Force master latency timer to 64 PCI clocks */
|
||||
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
|
||||
|
||||
/* OSB4 : South Bridge and IDE */
|
||||
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
|
||||
/* Select non UDMA capable OSB4 if we can't do fixups */
|
||||
if ( serverworks_fixup_osb4(pdev) < 0)
|
||||
devinfo = &info[1];
|
||||
}
|
||||
/* setup CSB5/CSB6 : South Bridge and IDE option RAID */
|
||||
else if ((pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ||
|
||||
(pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
|
||||
(pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
|
||||
|
||||
/* If the returned btr is the newer revision then
|
||||
select the right info block */
|
||||
if (serverworks_fixup_csb(pdev) == 3)
|
||||
devinfo = &info[3];
|
||||
|
||||
/* Is this the 3rd channel CSB6 IDE ? */
|
||||
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)
|
||||
ports = 1;
|
||||
}
|
||||
/* setup HT1000E */
|
||||
else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
|
||||
serverworks_fixup_ht1000(pdev);
|
||||
|
||||
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
|
||||
ata_pci_clear_simplex(pdev);
|
||||
|
||||
port_info[0] = port_info[1] = devinfo;
|
||||
return ata_pci_init_one(pdev, port_info, ports);
|
||||
}
|
||||
|
||||
static struct pci_device_id serverworks[] = {
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0},
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 2},
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2},
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 2},
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 2},
|
||||
{ 0, },
|
||||
};
|
||||
|
||||
static struct pci_driver serverworks_pci_driver = {
|
||||
.name = DRV_NAME,
|
||||
.id_table = serverworks,
|
||||
.probe = serverworks_init_one,
|
||||
.remove = ata_pci_remove_one
|
||||
};
|
||||
|
||||
static int __init serverworks_init(void)
|
||||
{
|
||||
return pci_register_driver(&serverworks_pci_driver);
|
||||
}
|
||||
|
||||
|
||||
static void __exit serverworks_exit(void)
|
||||
{
|
||||
pci_unregister_driver(&serverworks_pci_driver);
|
||||
}
|
||||
|
||||
|
||||
MODULE_AUTHOR("Alan Cox");
|
||||
MODULE_DESCRIPTION("low-level driver for Serverworks OSB4/CSB5/CSB6");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_DEVICE_TABLE(pci, serverworks);
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
|
||||
module_init(serverworks_init);
|
||||
module_exit(serverworks_exit);
|
||||
Reference in New Issue
Block a user