Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
  omap: complete removal of machine_desc.io_pg_offst and .phys_io
  omap: UART: fix wakeup registers for OMAP24xx UART2
  omap: Fix spotty MMC voltages
  ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
  serial: omap-serial: fix signess error
  OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
  omap: dma: Fix buffering disable bit setting for omap24xx
  omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
  OMAP3: PM: fix scratchpad memory accesses for off-mode
  omap4: pandaboard: enable the ehci port on pandaboard
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: remove unused hsmmc definition
  OMAP: McBSP: Remove null omap44xx ops comment
  OMAP: McBSP: Swap CLKS source definition
  OMAP: McBSP: Fix CLKR and FSR signal muxing
  OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  OMAP: split plat-omap/common.c
  OMAP: McBSP: implement functional clock switching via clock framework
  OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  ...

Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony

arch/arm/mach-omap2/board-omap3beagle.c

@@ -27,6 +27,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -43,13 +44,100 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/timer-gp.h>
 
 #include "mux.h"
 #include "hsmmc.h"
+#include "timer-gp.h"
 
 #define NAND_BLOCK_SIZE		SZ_128K
 
+/*
+ * OMAP3 Beagle revision
+ * Run time detection of Beagle revision is done by reading GPIO.
+ * GPIO ID -
+ *	AXBX	= GPIO173, GPIO172, GPIO171: 1 1 1
+ *	C1_3	= GPIO173, GPIO172, GPIO171: 1 1 0
+ *	C4	= GPIO173, GPIO172, GPIO171: 1 0 1
+ *	XM	= GPIO173, GPIO172, GPIO171: 0 0 0
+ */
+enum {
+	OMAP3BEAGLE_BOARD_UNKN = 0,
+	OMAP3BEAGLE_BOARD_AXBX,
+	OMAP3BEAGLE_BOARD_C1_3,
+	OMAP3BEAGLE_BOARD_C4,
+	OMAP3BEAGLE_BOARD_XM,
+};
+
+static u8 omap3_beagle_version;
+
+static u8 omap3_beagle_get_rev(void)
+{
+	return omap3_beagle_version;
+}
+
+static void __init omap3_beagle_init_rev(void)
+{
+	int ret;
+	u16 beagle_rev = 0;
+
+	omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP);
+
+	ret = gpio_request(171, "rev_id_0");
+	if (ret < 0)
+		goto fail0;
+
+	ret = gpio_request(172, "rev_id_1");
+	if (ret < 0)
+		goto fail1;
+
+	ret = gpio_request(173, "rev_id_2");
+	if (ret < 0)
+		goto fail2;
+
+	gpio_direction_input(171);
+	gpio_direction_input(172);
+	gpio_direction_input(173);
+
+	beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
+			| (gpio_get_value(173) << 2);
+
+	switch (beagle_rev) {
+	case 7:
+		printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
+		break;
+	case 6:
+		printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
+		break;
+	case 5:
+		printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
+		break;
+	case 0:
+		printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+		break;
+	default:
+		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+	}
+
+	return;
+
+fail2:
+	gpio_free(172);
+fail1:
+	gpio_free(171);
+fail0:
+	printk(KERN_ERR "Unable to get revision detection GPIO pins\n");
+	omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+
+	return;
+}
+
 static struct mtd_partition omap3beagle_nand_partitions[] = {
 	/* All the partition sizes are listed in terms of NAND block size */
 	{
@@ -166,7 +254,7 @@ static void __init beagle_display_init(void)
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.wires		= 8,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 29,
 	},
 	{}	/* Terminator */
@@ -185,7 +273,10 @@ static struct gpio_led gpio_leds[];
 static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
-	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+		mmc[0].gpio_wp = -EINVAL;
+	} else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
+		(omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
 		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 		mmc[0].gpio_wp = 23;
 	} else {
@@ -322,13 +413,19 @@ static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
 	},
 };
 
+static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
+       {
+               I2C_BOARD_INFO("eeprom", 0x50),
+       },
+};
+
 static int __init omap3_beagle_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
 			ARRAY_SIZE(beagle_i2c_boardinfo));
 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
 	 * projector don't work reliably with 400kHz */
-	omap_register_i2c_bus(3, 100, NULL, 0);
+	omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom));
 	return 0;
 }
 
@@ -464,6 +561,7 @@ static struct omap_musb_board_data musb_board_data = {
 static void __init omap3_beagle_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap3_beagle_init_rev();
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));