powerpc/iseries: Cleanup and fix secondary startup

9cb82f2f46 (Make iSeries spin on
__secondary_hold_spinloop, like pSeries) added a load of current_set
but this load was repeated later and we don't even have the paca yet.
It also checked __secondary_hold_spinloop with a 32 bit compare instead
of a 64 bit compare.

b6f6b98a4e (Don't spin on sync instruction
at boot time) missed the copy of the startup code in iseries.

1426d5a3bd (Dynamically allocate pacas)
doesn't allow for pacas to be less than lppacas and recalculated the paca
location from the cpu id in r0 every time through the secondary loop.

Various revisions over time made the comments on conditional branches
confusing with respect to being a hold loop or forward progress

Mostly in-order description of the changes:

Replicate the few lines of code saved by the ugly scoped ifdef CONFIG_SMP
in the secondary loop between yielding on UP and marking time with the
hypervisor on SMP.  Always compile the iseries_secondary_yield loop and
use it if the cpu id is above nr_cpu_ids.  Change all forward progress
paths to be forward branches to the next numerical label.  Assign a
label to all loops.  Move all sync instructions from the loops to the
forward progress path.  Wait to load current_set until paca is set to go.
Move the iseries_secondary_smp_loop label to cover the whole spin loop.
Add HMT_MEDIUM when we make forward progress.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This commit is contained in:
Milton Miller 2011-05-10 19:28:44 +00:00 committed by Benjamin Herrenschmidt
parent bd9e5eefec
commit 7c82733744

View File

@ -61,29 +61,31 @@ system_reset_iSeries:
/* Spin on __secondary_hold_spinloop until it is updated by the boot cpu. */
/* In the UP case we'll yield() later, and we will not access the paca anyway */
#ifdef CONFIG_SMP
1:
iSeries_secondary_wait_paca:
HMT_LOW
LOAD_REG_ADDR(r23, __secondary_hold_spinloop)
ld r23,0(r23)
sync
LOAD_REG_ADDR(r3,current_set)
sldi r28,r24,3 /* get current_set[cpu#] */
ldx r3,r3,r28
addi r1,r3,THREAD_SIZE
subi r1,r1,STACK_FRAME_OVERHEAD
cmpwi 0,r23,0 /* Keep poking the Hypervisor until */
bne 2f /* we're released */
/* Let the Hypervisor know we are alive */
cmpdi 0,r23,0
bne 2f /* go on when the master is ready */
/* Keep poking the Hypervisor until we're released */
/* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
lis r3,0x8002
rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */
li r0,-1 /* r0=-1 indicates a Hypervisor call */
sc /* Invoke the hypervisor via a system call */
b 1b
#endif
b iSeries_secondary_wait_paca
2:
HMT_MEDIUM
sync
LOAD_REG_ADDR(r3, nr_cpu_ids) /* get number of pacas allocated */
lwz r3,0(r3) /* nr_cpus= or NR_CPUS can limit */
cmpld 0,r24,r3 /* is our cpu number allocated? */
bge iSeries_secondary_yield /* no, yield forever */
/* Load our paca now that it's been allocated */
LOAD_REG_ADDR(r13, paca)
ld r13,0(r13)
@ -94,10 +96,24 @@ system_reset_iSeries:
ori r23,r23,MSR_RI
mtmsrd r23 /* RI on */
HMT_LOW
#ifdef CONFIG_SMP
iSeries_secondary_smp_loop:
lbz r23,PACAPROCSTART(r13) /* Test if this processor
* should start */
cmpwi 0,r23,0
bne 3f /* go on when we are told */
HMT_LOW
/* Let the Hypervisor know we are alive */
/* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
lis r3,0x8002
rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */
li r0,-1 /* r0=-1 indicates a Hypervisor call */
sc /* Invoke the hypervisor via a system call */
mfspr r13,SPRN_SPRG_PACA /* Put r13 back ???? */
b iSeries_secondary_smp_loop /* wait for signal to start */
3:
HMT_MEDIUM
sync
LOAD_REG_ADDR(r3,current_set)
sldi r28,r24,3 /* get current_set[cpu#] */
@ -105,27 +121,22 @@ system_reset_iSeries:
addi r1,r3,THREAD_SIZE
subi r1,r1,STACK_FRAME_OVERHEAD
cmpwi 0,r23,0
beq iSeries_secondary_smp_loop /* Loop until told to go */
b __secondary_start /* Loop until told to go */
iSeries_secondary_smp_loop:
/* Let the Hypervisor know we are alive */
/* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
lis r3,0x8002
rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */
#else /* CONFIG_SMP */
#endif /* CONFIG_SMP */
iSeries_secondary_yield:
/* Yield the processor. This is required for non-SMP kernels
which are running on multi-threaded machines. */
HMT_LOW
lis r3,0x8000
rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */
addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */
li r4,0 /* "yield timed" */
li r5,-1 /* "yield forever" */
#endif /* CONFIG_SMP */
li r0,-1 /* r0=-1 indicates a Hypervisor call */
sc /* Invoke the hypervisor via a system call */
mfspr r13,SPRN_SPRG_PACA /* Put r13 back ???? */
b 2b /* If SMP not configured, secondaries
b iSeries_secondary_yield /* If SMP not configured, secondaries
* loop forever */
/*** ISeries-LPAR interrupt handlers ***/