Merge remote-tracking branches 'regulator/fix/pfuze100', 'regulator/fix/s5m8767', 'regulator/topic/ab8500', 'regulator/topic/act8865', 'regulator/topic/anatop', 'regulator/topic/arizona' and 'regulator/topic/as3722' into regulator-linus

This commit is contained in:
Mark Brown 2014-01-23 12:01:24 +00:00
13 changed files with 537 additions and 191 deletions

View File

@ -0,0 +1,60 @@
ACT8865 regulator
-------------------
Required properties:
- compatible: "active-semi,act8865"
- reg: I2C slave address
Any standard regulator properties can be used to configure the single regulator.
The valid names for regulators are:
DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
Example:
--------
i2c1: i2c@f0018000 {
pmic: act8865@5b {
compatible = "active-semi,act8865";
reg = <0x5b>;
status = "disabled";
regulators {
vcc_1v8_reg: DCDC_REG1 {
regulator-name = "VCC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vcc_1v2_reg: DCDC_REG2 {
regulator-name = "VCC_1V2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-suspend-mem-microvolt = <1150000>;
regulator-suspend-standby-microvolt = <1150000>;
regulator-always-on;
};
vcc_3v3_reg: DCDC_REG3 {
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vddana_reg: LDO_REG1 {
regulator-name = "VDDANA";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vddfuse_reg: LDO_REG2 {
regulator-name = "FUSE_2V5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
};
};
};

View File

@ -83,7 +83,7 @@ as per the datasheet of s5m8767.
- LDOn
- valid values for n are 1 to 28
- Example: LDO0, LD01, LDO28
- Example: LDO1, LD02, LDO28
- BUCKn
- valid values for n are 1 to 9.
- Example: BUCK1, BUCK2, BUCK9

View File

@ -3,6 +3,7 @@ Device tree binding vendor prefix registry. Keep list in alphabetical order.
This isn't an exhaustive list, but you should add new prefixes to it before
using them to avoid name-space collisions.
active-semi Active-Semi International Inc
ad Avionic Design GmbH
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB

View File

@ -70,6 +70,14 @@ config REGULATOR_88PM8607
help
This driver supports 88PM8607 voltage regulator chips.
config REGULATOR_ACT8865
tristate "Active-semi act8865 voltage regulator"
depends on I2C
select REGMAP_I2C
help
This driver controls a active-semi act8865 voltage output
regulator via I2C bus.
config REGULATOR_AD5398
tristate "Analog Devices AD5398/AD5821 regulators"
depends on I2C

View File

@ -14,6 +14,7 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o

View File

@ -2998,37 +2998,6 @@ static void abx500_get_regulator_info(struct ab8500 *ab8500)
}
}
static int ab8500_regulator_init_registers(struct platform_device *pdev,
int id, int mask, int value)
{
struct ab8500_reg_init *reg_init = abx500_regulator.init;
int err;
BUG_ON(value & ~mask);
BUG_ON(mask & ~reg_init[id].mask);
/* initialize register */
err = abx500_mask_and_set_register_interruptible(
&pdev->dev,
reg_init[id].bank,
reg_init[id].addr,
mask, value);
if (err < 0) {
dev_err(&pdev->dev,
"Failed to initialize 0x%02x, 0x%02x.\n",
reg_init[id].bank,
reg_init[id].addr);
return err;
}
dev_vdbg(&pdev->dev,
" init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
reg_init[id].bank,
reg_init[id].addr,
mask, value);
return 0;
}
static int ab8500_regulator_register(struct platform_device *pdev,
struct regulator_init_data *init_data,
int id, struct device_node *np)
@ -3036,7 +3005,6 @@ static int ab8500_regulator_register(struct platform_device *pdev,
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_regulator_info *info = NULL;
struct regulator_config config = { };
int err;
/* assign per-regulator data */
info = &abx500_regulator.info[id];
@ -3058,17 +3026,12 @@ static int ab8500_regulator_register(struct platform_device *pdev,
}
/* register regulator with framework */
info->regulator = regulator_register(&info->desc, &config);
info->regulator = devm_regulator_register(&pdev->dev, &info->desc,
&config);
if (IS_ERR(info->regulator)) {
err = PTR_ERR(info->regulator);
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
/* when we fail, un-register all earlier regulators */
while (--id >= 0) {
info = &abx500_regulator.info[id];
regulator_unregister(info->regulator);
}
return err;
return PTR_ERR(info->regulator);
}
return 0;
@ -3095,9 +3058,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct device_node *np = pdev->dev.of_node;
struct ab8500_platform_data *ppdata;
struct ab8500_regulator_platform_data *pdata;
int i, err;
int err;
if (!ab8500) {
dev_err(&pdev->dev, "null mfd parent\n");
@ -3106,83 +3067,20 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
abx500_get_regulator_info(ab8500);
if (np) {
err = of_regulator_match(&pdev->dev, np,
abx500_regulator.match,
abx500_regulator.match_size);
if (err < 0) {
dev_err(&pdev->dev,
"Error parsing regulator init data: %d\n", err);
return err;
}
err = ab8500_regulator_of_probe(pdev, np);
err = of_regulator_match(&pdev->dev, np,
abx500_regulator.match,
abx500_regulator.match_size);
if (err < 0) {
dev_err(&pdev->dev,
"Error parsing regulator init data: %d\n", err);
return err;
}
ppdata = dev_get_platdata(ab8500->dev);
if (!ppdata) {
dev_err(&pdev->dev, "null parent pdata\n");
return -EINVAL;
}
pdata = ppdata->regulator;
if (!pdata) {
dev_err(&pdev->dev, "null pdata\n");
return -EINVAL;
}
/* make sure the platform data has the correct size */
if (pdata->num_regulator != abx500_regulator.info_size) {
dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
return -EINVAL;
}
/* initialize debug (initial state is recorded with this call) */
err = ab8500_regulator_debug_init(pdev);
if (err)
return err;
/* initialize registers */
for (i = 0; i < pdata->num_reg_init; i++) {
int id, mask, value;
id = pdata->reg_init[i].id;
mask = pdata->reg_init[i].mask;
value = pdata->reg_init[i].value;
/* check for configuration errors */
BUG_ON(id >= abx500_regulator.init_size);
err = ab8500_regulator_init_registers(pdev, id, mask, value);
if (err < 0)
return err;
}
/* register all regulators */
for (i = 0; i < abx500_regulator.info_size; i++) {
err = ab8500_regulator_register(pdev, &pdata->regulator[i],
i, NULL);
if (err < 0)
return err;
}
return 0;
return ab8500_regulator_of_probe(pdev, np);
}
static int ab8500_regulator_remove(struct platform_device *pdev)
{
int i, err;
for (i = 0; i < abx500_regulator.info_size; i++) {
struct ab8500_regulator_info *info = NULL;
info = &abx500_regulator.info[i];
dev_vdbg(rdev_get_dev(info->regulator),
"%s-remove\n", info->desc.name);
regulator_unregister(info->regulator);
}
int err;
/* remove regulator debug */
err = ab8500_regulator_debug_exit(pdev);

View File

@ -0,0 +1,349 @@
/*
* act8865-regulator.c - Voltage regulation for the active-semi ACT8865
* http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf
*
* Copyright (C) 2013 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/act8865.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
/*
* ACT8865 Global Register Map.
*/
#define ACT8865_SYS_MODE 0x00
#define ACT8865_SYS_CTRL 0x01
#define ACT8865_DCDC1_VSET1 0x20
#define ACT8865_DCDC1_VSET2 0x21
#define ACT8865_DCDC1_CTRL 0x22
#define ACT8865_DCDC2_VSET1 0x30
#define ACT8865_DCDC2_VSET2 0x31
#define ACT8865_DCDC2_CTRL 0x32
#define ACT8865_DCDC3_VSET1 0x40
#define ACT8865_DCDC3_VSET2 0x41
#define ACT8865_DCDC3_CTRL 0x42
#define ACT8865_LDO1_VSET 0x50
#define ACT8865_LDO1_CTRL 0x51
#define ACT8865_LDO2_VSET 0x54
#define ACT8865_LDO2_CTRL 0x55
#define ACT8865_LDO3_VSET 0x60
#define ACT8865_LDO3_CTRL 0x61
#define ACT8865_LDO4_VSET 0x64
#define ACT8865_LDO4_CTRL 0x65
/*
* Field Definitions.
*/
#define ACT8865_ENA 0x80 /* ON - [7] */
#define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
/*
* ACT8865 voltage number
*/
#define ACT8865_VOLTAGE_NUM 64
struct act8865 {
struct regulator_dev *rdev[ACT8865_REG_NUM];
struct regmap *regmap;
};
static const struct regmap_config act8865_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
static const struct regulator_linear_range act8865_volatge_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
};
static struct regulator_ops act8865_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static const struct regulator_desc act8865_reg[] = {
{
.name = "DCDC_REG1",
.id = ACT8865_ID_DCDC1,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC1_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC1_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "DCDC_REG2",
.id = ACT8865_ID_DCDC2,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC2_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC2_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "DCDC_REG3",
.id = ACT8865_ID_DCDC3,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC3_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC3_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG1",
.id = ACT8865_ID_LDO1,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO1_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO1_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG2",
.id = ACT8865_ID_LDO2,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO2_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO2_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG3",
.id = ACT8865_ID_LDO3,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO3_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO3_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG4",
.id = ACT8865_ID_LDO4,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO4_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO4_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
};
#ifdef CONFIG_OF
static const struct of_device_id act8865_dt_ids[] = {
{ .compatible = "active-semi,act8865" },
{ }
};
MODULE_DEVICE_TABLE(of, act8865_dt_ids);
static struct of_regulator_match act8865_matches[] = {
[ACT8865_ID_DCDC1] = { .name = "DCDC_REG1"},
[ACT8865_ID_DCDC2] = { .name = "DCDC_REG2"},
[ACT8865_ID_DCDC3] = { .name = "DCDC_REG3"},
[ACT8865_ID_LDO1] = { .name = "LDO_REG1"},
[ACT8865_ID_LDO2] = { .name = "LDO_REG2"},
[ACT8865_ID_LDO3] = { .name = "LDO_REG3"},
[ACT8865_ID_LDO4] = { .name = "LDO_REG4"},
};
static int act8865_pdata_from_dt(struct device *dev,
struct device_node **of_node,
struct act8865_platform_data *pdata)
{
int matched, i;
struct device_node *np;
struct act8865_regulator_data *regulator;
np = of_find_node_by_name(dev->of_node, "regulators");
if (!np) {
dev_err(dev, "missing 'regulators' subnode in DT\n");
return -EINVAL;
}
matched = of_regulator_match(dev, np,
act8865_matches, ARRAY_SIZE(act8865_matches));
if (matched <= 0)
return matched;
pdata->regulators = devm_kzalloc(dev,
sizeof(struct act8865_regulator_data) *
ARRAY_SIZE(act8865_matches), GFP_KERNEL);
if (!pdata->regulators) {
dev_err(dev, "%s: failed to allocate act8865 registor\n",
__func__);
return -ENOMEM;
}
pdata->num_regulators = matched;
regulator = pdata->regulators;
for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) {
regulator->id = i;
regulator->name = act8865_matches[i].name;
regulator->platform_data = act8865_matches[i].init_data;
of_node[i] = act8865_matches[i].of_node;
regulator++;
}
return 0;
}
#else
static inline int act8865_pdata_from_dt(struct device *dev,
struct device_node **of_node,
struct act8865_platform_data *pdata)
{
return 0;
}
#endif
static int act8865_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
struct regulator_dev **rdev;
struct device *dev = &client->dev;
struct act8865_platform_data *pdata = dev_get_platdata(dev);
struct regulator_config config = { };
struct act8865 *act8865;
struct device_node *of_node[ACT8865_REG_NUM];
int i, id;
int ret = -EINVAL;
int error;
if (dev->of_node && !pdata) {
const struct of_device_id *id;
struct act8865_platform_data pdata_of;
id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
if (!id)
return -ENODEV;
ret = act8865_pdata_from_dt(dev, of_node, &pdata_of);
if (ret < 0)
return ret;
pdata = &pdata_of;
}
if (pdata->num_regulators > ACT8865_REG_NUM) {
dev_err(dev, "Too many regulators found!\n");
return -EINVAL;
}
act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL);
if (!act8865)
return -ENOMEM;
rdev = act8865->rdev;
act8865->regmap = devm_regmap_init_i2c(client, &act8865_regmap_config);
if (IS_ERR(act8865->regmap)) {
error = PTR_ERR(act8865->regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
error);
return error;
}
/* Finally register devices */
for (i = 0; i < ACT8865_REG_NUM; i++) {
id = pdata->regulators[i].id;
config.dev = dev;
config.init_data = pdata->regulators[i].platform_data;
config.of_node = of_node[i];
config.driver_data = act8865;
config.regmap = act8865->regmap;
rdev[i] = devm_regulator_register(&client->dev,
&act8865_reg[i], &config);
if (IS_ERR(rdev[i])) {
dev_err(dev, "failed to register %s\n",
act8865_reg[id].name);
return PTR_ERR(rdev[i]);
}
}
i2c_set_clientdata(client, act8865);
return 0;
}
static const struct i2c_device_id act8865_ids[] = {
{ "act8865", 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, act8865_ids);
static struct i2c_driver act8865_pmic_driver = {
.driver = {
.name = "act8865",
.owner = THIS_MODULE,
},
.probe = act8865_pmic_probe,
.id_table = act8865_ids,
};
module_i2c_driver(act8865_pmic_driver);
MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver");
MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
MODULE_LICENSE("GPL v2");

View File

@ -122,10 +122,8 @@ static int anatop_regulator_probe(struct platform_device *pdev)
if (!sreg)
return -ENOMEM;
sreg->initdata = initdata;
sreg->name = kstrdup(of_get_property(np, "regulator-name", NULL),
GFP_KERNEL);
sreg->name = of_get_property(np, "regulator-name", NULL);
rdesc = &sreg->rdesc;
memset(rdesc, 0, sizeof(*rdesc));
rdesc->name = sreg->name;
rdesc->ops = &anatop_rops;
rdesc->type = REGULATOR_VOLTAGE;
@ -143,37 +141,37 @@ static int anatop_regulator_probe(struct platform_device *pdev)
&sreg->control_reg);
if (ret) {
dev_err(dev, "no anatop-reg-offset property set\n");
goto anatop_probe_end;
return ret;
}
ret = of_property_read_u32(np, "anatop-vol-bit-width",
&sreg->vol_bit_width);
if (ret) {
dev_err(dev, "no anatop-vol-bit-width property set\n");
goto anatop_probe_end;
return ret;
}
ret = of_property_read_u32(np, "anatop-vol-bit-shift",
&sreg->vol_bit_shift);
if (ret) {
dev_err(dev, "no anatop-vol-bit-shift property set\n");
goto anatop_probe_end;
return ret;
}
ret = of_property_read_u32(np, "anatop-min-bit-val",
&sreg->min_bit_val);
if (ret) {
dev_err(dev, "no anatop-min-bit-val property set\n");
goto anatop_probe_end;
return ret;
}
ret = of_property_read_u32(np, "anatop-min-voltage",
&sreg->min_voltage);
if (ret) {
dev_err(dev, "no anatop-min-voltage property set\n");
goto anatop_probe_end;
return ret;
}
ret = of_property_read_u32(np, "anatop-max-voltage",
&sreg->max_voltage);
if (ret) {
dev_err(dev, "no anatop-max-voltage property set\n");
goto anatop_probe_end;
return ret;
}
/* read LDO ramp up setting, only for core reg */
@ -204,27 +202,11 @@ static int anatop_regulator_probe(struct platform_device *pdev)
if (IS_ERR(rdev)) {
dev_err(dev, "failed to register %s\n",
rdesc->name);
ret = PTR_ERR(rdev);
goto anatop_probe_end;
return PTR_ERR(rdev);
}
platform_set_drvdata(pdev, rdev);
anatop_probe_end:
if (ret)
kfree(sreg->name);
return ret;
}
static int anatop_regulator_remove(struct platform_device *pdev)
{
struct regulator_dev *rdev = platform_get_drvdata(pdev);
struct anatop_regulator *sreg = rdev_get_drvdata(rdev);
const char *name = sreg->name;
kfree(name);
return 0;
}
@ -240,7 +222,6 @@ static struct platform_driver anatop_regulator_driver = {
.of_match_table = of_anatop_regulator_match_tbl,
},
.probe = anatop_regulator_probe,
.remove = anatop_regulator_remove,
};
static int __init anatop_regulator_init(void)
@ -259,3 +240,4 @@ MODULE_AUTHOR("Nancy Chen <Nancy.Chen@freescale.com>");
MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>");
MODULE_DESCRIPTION("ANATOP Regulator driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:anatop_regulator");

View File

@ -28,8 +28,6 @@
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
#define ARIZONA_MICSUPP_MAX_SELECTOR 0x1f
struct arizona_micsupp {
struct regulator_dev *regulator;
struct arizona *arizona;
@ -40,42 +38,6 @@ struct arizona_micsupp {
struct work_struct check_cp_work;
};
static int arizona_micsupp_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
if (selector > ARIZONA_MICSUPP_MAX_SELECTOR)
return -EINVAL;
if (selector == ARIZONA_MICSUPP_MAX_SELECTOR)
return 3300000;
else
return (selector * 50000) + 1700000;
}
static int arizona_micsupp_map_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
unsigned int voltage;
int selector;
if (min_uV < 1700000)
min_uV = 1700000;
if (min_uV > 3200000)
selector = ARIZONA_MICSUPP_MAX_SELECTOR;
else
selector = DIV_ROUND_UP(min_uV - 1700000, 50000);
if (selector < 0)
return -EINVAL;
voltage = arizona_micsupp_list_voltage(rdev, selector);
if (voltage < min_uV || voltage > max_uV)
return -EINVAL;
return selector;
}
static void arizona_micsupp_check_cp(struct work_struct *work)
{
struct arizona_micsupp *micsupp =
@ -145,8 +107,8 @@ static struct regulator_ops arizona_micsupp_ops = {
.disable = arizona_micsupp_disable,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = arizona_micsupp_list_voltage,
.map_voltage = arizona_micsupp_map_voltage,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
@ -155,11 +117,16 @@ static struct regulator_ops arizona_micsupp_ops = {
.set_bypass = arizona_micsupp_set_bypass,
};
static const struct regulator_linear_range arizona_micsupp_ranges[] = {
REGULATOR_LINEAR_RANGE(1700000, 0, 0x1e, 50000),
REGULATOR_LINEAR_RANGE(3300000, 0x1f, 0x1f, 0),
};
static const struct regulator_desc arizona_micsupp = {
.name = "MICVDD",
.supply_name = "CPVDD",
.type = REGULATOR_VOLTAGE,
.n_voltages = ARIZONA_MICSUPP_MAX_SELECTOR + 1,
.n_voltages = 32,
.ops = &arizona_micsupp_ops,
.vsel_reg = ARIZONA_LDO2_CONTROL_1,
@ -169,6 +136,9 @@ static const struct regulator_desc arizona_micsupp = {
.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
.bypass_mask = ARIZONA_CPMIC_BYPASS,
.linear_ranges = arizona_micsupp_ranges,
.n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ranges),
.enable_time = 3000,
.owner = THIS_MODULE,

View File

@ -99,7 +99,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
.sleep_ctrl_mask = AS3722_SD0_EXT_ENABLE_MASK,
.control_reg = AS3722_SD0_CONTROL_REG,
.mode_mask = AS3722_SD0_MODE_FAST,
.n_voltages = AS3722_SD0_VSEL_MAX + 1,
},
{
.regulator_id = AS3722_REGULATOR_ID_SD1,
@ -112,7 +111,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
.sleep_ctrl_mask = AS3722_SD1_EXT_ENABLE_MASK,
.control_reg = AS3722_SD1_CONTROL_REG,
.mode_mask = AS3722_SD1_MODE_FAST,
.n_voltages = AS3722_SD0_VSEL_MAX + 1,
},
{
.regulator_id = AS3722_REGULATOR_ID_SD2,
@ -181,7 +179,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
.sleep_ctrl_mask = AS3722_SD6_EXT_ENABLE_MASK,
.control_reg = AS3722_SD6_CONTROL_REG,
.mode_mask = AS3722_SD6_MODE_FAST,
.n_voltages = AS3722_SD0_VSEL_MAX + 1,
},
{
.regulator_id = AS3722_REGULATOR_ID_LDO0,
@ -595,6 +592,22 @@ static int as3722_sd016_set_current_limit(struct regulator_dev *rdev,
return as3722_update_bits(as3722, reg, mask, val);
}
static bool as3722_sd0_is_low_voltage(struct as3722_regulators *as3722_regs)
{
int err;
unsigned val;
err = as3722_read(as3722_regs->as3722, AS3722_FUSE7_REG, &val);
if (err < 0) {
dev_err(as3722_regs->dev, "Reg 0x%02x read failed: %d\n",
AS3722_FUSE7_REG, err);
return false;
}
if (val & AS3722_FUSE7_SD0_LOW_VOLTAGE)
return true;
return false;
}
static const struct regulator_linear_range as3722_sd2345_ranges[] = {
REGULATOR_LINEAR_RANGE(612500, 0x01, 0x40, 12500),
REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000),
@ -820,9 +833,19 @@ static int as3722_regulator_probe(struct platform_device *pdev)
ops = &as3722_sd016_extcntrl_ops;
else
ops = &as3722_sd016_ops;
as3722_regs->desc[id].min_uV = 610000;
if (id == AS3722_REGULATOR_ID_SD0 &&
as3722_sd0_is_low_voltage(as3722_regs)) {
as3722_regs->desc[id].n_voltages =
AS3722_SD0_VSEL_LOW_VOL_MAX + 1;
as3722_regs->desc[id].min_uV = 410000;
} else {
as3722_regs->desc[id].n_voltages =
AS3722_SD0_VSEL_MAX + 1,
as3722_regs->desc[id].min_uV = 610000;
}
as3722_regs->desc[id].uV_step = 10000;
as3722_regs->desc[id].linear_min_sel = 1;
as3722_regs->desc[id].enable_time = 600;
break;
case AS3722_REGULATOR_ID_SD2:
case AS3722_REGULATOR_ID_SD3:
@ -842,9 +865,6 @@ static int as3722_regulator_probe(struct platform_device *pdev)
ops = &as3722_ldo_extcntrl_ops;
else
ops = &as3722_ldo_ops;
as3722_regs->desc[id].min_uV = 825000;
as3722_regs->desc[id].uV_step = 25000;
as3722_regs->desc[id].linear_min_sel = 1;
as3722_regs->desc[id].enable_time = 500;
as3722_regs->desc[id].linear_ranges = as3722_ldo_ranges;
as3722_regs->desc[id].n_linear_ranges =

View File

@ -323,7 +323,7 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
if (ret)
return ret;
dev_info(pfuze_chip->dev,
"Full lay: %x, Metal lay: %x\n",
"Full layer: %x, Metal layer: %x\n",
(value & 0xf0) >> 4, value & 0x0f);
ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value);

View File

@ -151,6 +151,7 @@
#define AS3722_ASIC_ID1_REG 0x90
#define AS3722_ASIC_ID2_REG 0x91
#define AS3722_LOCK_REG 0x9E
#define AS3722_FUSE7_REG 0xA7
#define AS3722_MAX_REGISTER 0xF4
#define AS3722_SD0_EXT_ENABLE_MASK 0x03
@ -224,6 +225,7 @@
#define AS3722_SD_VSEL_MASK 0x7F
#define AS3722_SD0_VSEL_MIN 0x01
#define AS3722_SD0_VSEL_MAX 0x5A
#define AS3722_SD0_VSEL_LOW_VOL_MAX 0x6E
#define AS3722_SD2_VSEL_MIN 0x01
#define AS3722_SD2_VSEL_MAX 0x7F
@ -341,6 +343,8 @@
#define AS3722_EXT_CONTROL_ENABLE2 0x2
#define AS3722_EXT_CONTROL_ENABLE3 0x3
#define AS3722_FUSE7_SD0_LOW_VOLTAGE BIT(4)
/* Interrupt IDs */
enum as3722_irq {
AS3722_IRQ_LID,

View File

@ -0,0 +1,53 @@
/*
* act8865.h -- Voltage regulation for the active-semi act8865
*
* Copyright (C) 2013 Atmel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __LINUX_REGULATOR_ACT8865_H
#define __LINUX_REGULATOR_ACT8865_H
#include <linux/regulator/machine.h>
enum {
ACT8865_ID_DCDC1,
ACT8865_ID_DCDC2,
ACT8865_ID_DCDC3,
ACT8865_ID_LDO1,
ACT8865_ID_LDO2,
ACT8865_ID_LDO3,
ACT8865_ID_LDO4,
ACT8865_REG_NUM,
};
/**
* act8865_regulator_data - regulator data
* @id: regulator id
* @name: regulator name
* @platform_data: regulator init data
*/
struct act8865_regulator_data {
int id;
const char *name;
struct regulator_init_data *platform_data;
};
/**
* act8865_platform_data - platform data for act8865
* @num_regulators: number of regulators used
* @regulators: pointer to regulators used
*/
struct act8865_platform_data {
int num_regulators;
struct act8865_regulator_data *regulators;
};
#endif