Merge branch 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6

* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  spi.h: missing kernel-doc notation, please fix
  of: fix missing headers for of_address_to_resource() in MTD and SysACE drivers
  of: Fix missing includes
  ata: update for of_device to platform_device replacement
  microblaze: Fix of: eliminate of_device->node and dev_archdata->{of,prom}_node
  microblaze: Fix of/address: Merge all of the bus translation code
  booting-without-of: Remove nonexistent chapters from TOC, fix numbering

Documentation/powerpc/booting-without-of.txt

@@ -49,40 +49,13 @@ Table of Contents
       f) MDIO on GPIOs
       g) SPI busses
 
-  VII - Marvell Discovery mv64[345]6x System Controller chips
+  VII - Specifying interrupt information for devices
-    1) The /system-controller node
-    2) Child nodes of /system-controller
-      a) Marvell Discovery MDIO bus
-      b) Marvell Discovery ethernet controller
-      c) Marvell Discovery PHY nodes
-      d) Marvell Discovery SDMA nodes
-      e) Marvell Discovery BRG nodes
-      f) Marvell Discovery CUNIT nodes
-      g) Marvell Discovery MPSCROUTING nodes
-      h) Marvell Discovery MPSCINTR nodes
-      i) Marvell Discovery MPSC nodes
-      j) Marvell Discovery Watch Dog Timer nodes
-      k) Marvell Discovery I2C nodes
-      l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-      m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-      n) Marvell Discovery GPP (General Purpose Pins) nodes
-      o) Marvell Discovery PCI host bridge node
-      p) Marvell Discovery CPU Error nodes
-      q) Marvell Discovery SRAM Controller nodes
-      r) Marvell Discovery PCI Error Handler nodes
-      s) Marvell Discovery Memory Controller nodes
-
-  VIII - Specifying interrupt information for devices
     1) interrupts property
     2) interrupt-parent property
     3) OpenPIC Interrupt Controllers
     4) ISA Interrupt Controllers
 
-  IX - Specifying GPIO information for devices
+  VIII - Specifying device power management information (sleep property)
-    1) gpios property
-    2) gpio-controller nodes
-
-  X - Specifying device power management information (sleep property)
 
   Appendix A - Sample SOC node for MPC8540
 

arch/microblaze/kernel/prom_parse.c

@@ -73,7 +73,7 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
 		/* We can only get here if we hit a P2P bridge with no node,
 		 * let's do standard swizzling and try again
 		 */
-		lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
+		lspec = pci_swizzle_interrupt_pin(pdev, lspec);
 		pdev = ppdev;
 	}
 

arch/microblaze/pci/pci-common.c

@@ -27,10 +27,11 @@
 #include <linux/irq.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
-#include <asm/prom.h>
 #include <asm/pci-bridge.h>
 #include <asm/byteorder.h>
 
@@ -1077,7 +1078,7 @@ void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
 		struct dev_archdata *sd = &dev->dev.archdata;
 
 		/* Setup OF node pointer in archdata */
-		sd->of_node = pci_device_to_OF_node(dev);
+		dev->dev.of_node = pci_device_to_OF_node(dev);
 
 		/* Fixup NUMA node as it may not be setup yet by the generic
 		 * code and is needed by the DMA init

arch/microblaze/pci/xilinx_pci.c

@@ -16,6 +16,7 @@
 
 #include <linux/ioport.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/pci.h>
 #include <asm/io.h>
 

drivers/ata/sata_dwc_460ex.c

@@ -1588,7 +1588,7 @@ static const struct ata_port_info sata_dwc_port_info[] = {
 	},
 };
 
-static int sata_dwc_probe(struct of_device *ofdev,
+static int sata_dwc_probe(struct platform_device *ofdev,
 			const struct of_device_id *match)
 {
 	struct sata_dwc_device *hsdev;
@@ -1702,7 +1702,7 @@ error_out:
 	return err;
 }
 
-static int sata_dwc_remove(struct of_device *ofdev)
+static int sata_dwc_remove(struct platform_device *ofdev)
 {
 	struct device *dev = &ofdev->dev;
 	struct ata_host *host = dev_get_drvdata(dev);

drivers/block/xsysace.c

@@ -94,6 +94,7 @@
 #include <linux/hdreg.h>
 #include <linux/platform_device.h>
 #if defined(CONFIG_OF)
+#include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 #endif

drivers/char/xilinx_hwicap/xilinx_hwicap.c

@@ -94,6 +94,7 @@
 
 #ifdef CONFIG_OF
 /* For open firmware. */
+#include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 #endif

drivers/mtd/maps/physmap_of.c

@@ -22,6 +22,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/concat.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
 

drivers/serial/of_serial.c

@@ -14,11 +14,10 @@
 #include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/nwpserial.h>
 
-#include <asm/prom.h>
-
 struct of_serial_info {
 	int type;
 	int line;

include/linux/spi/spi.h

@@ -213,6 +213,9 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  * @dma_alignment: SPI controller constraint on DMA buffers alignment.
  * @mode_bits: flags understood by this controller driver
  * @flags: other constraints relevant to this driver
+ * @bus_lock_spinlock: spinlock for SPI bus locking
+ * @bus_lock_mutex: mutex for SPI bus locking
+ * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use
  * @setup: updates the device mode and clocking records used by a
  *	device's SPI controller; protocol code may call this.  This
  *	must fail if an unrecognized or unsupported mode is requested.