[PATCH] skge: remove XM phy (untested code)

Remove support for the non-Broadcom genesis based boards. The code
is untested, and probably won't work as is. The newer boards are all
Yukon based, and only old Genesis board I can find uses Broadcom.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
This commit is contained in:
Stephen Hemminger 2005-06-27 11:33:10 -07:00 committed by Jeff Garzik
parent c506a50902
commit 89bf5f231f

View File

@ -621,16 +621,8 @@ static void skge_led_on(struct skge_hw *hw, int port)
skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
switch (hw->phy_type) {
case SK_PHY_BCOM:
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL,
PHY_B_PEC_LED_ON);
break;
default:
skge_write8(hw, SK_REG(port, TX_LED_TST), LED_T_ON);
skge_write32(hw, SK_REG(port, TX_LED_VAL), 100);
skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
}
/* For Broadcom Phy only */
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
} else {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
@ -651,15 +643,8 @@ static void skge_led_off(struct skge_hw *hw, int port)
skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
switch (hw->phy_type) {
case SK_PHY_BCOM:
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL,
PHY_B_PEC_LED_OFF);
break;
default:
skge_write32(hw, SK_REG(port, TX_LED_VAL), 0);
skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_T_OFF);
}
/* Broadcom only */
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
} else {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
@ -887,21 +872,21 @@ static u16 xm_phy_read(struct skge_hw *hw, int port, u16 reg)
xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
v = xm_read16(hw, port, XM_PHY_DATA);
if (hw->phy_type != SK_PHY_XMAC) {
for (i = 0; i < PHY_RETRIES; i++) {
udelay(1);
if (xm_read16(hw, port, XM_MMU_CMD)
& XM_MMU_PHY_RDY)
goto ready;
}
printk(KERN_WARNING PFX "%s: phy read timed out\n",
hw->dev[port]->name);
return 0;
ready:
v = xm_read16(hw, port, XM_PHY_DATA);
/* Need to wait for external PHY */
for (i = 0; i < PHY_RETRIES; i++) {
udelay(1);
if (xm_read16(hw, port, XM_MMU_CMD)
& XM_MMU_PHY_RDY)
goto ready;
}
printk(KERN_WARNING PFX "%s: phy read timed out\n",
hw->dev[port]->name);
return 0;
ready:
v = xm_read16(hw, port, XM_PHY_DATA);
return v;
}
@ -913,7 +898,7 @@ static void xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
for (i = 0; i < PHY_RETRIES; i++) {
if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
goto ready;
cpu_relax();
udelay(1);
}
printk(KERN_WARNING PFX "%s: phy write failed to come ready\n",
hw->dev[port]->name);
@ -970,9 +955,8 @@ static void genesis_reset(struct skge_hw *hw, int port)
xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */
xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */
/* disable all PHY IRQs */
if (hw->phy_type == SK_PHY_BCOM)
xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff);
/* disable Broadcom PHY IRQ */
xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff);
xm_outhash(hw, port, XM_HSM, (u8 *) &zero);
for (i = 0; i < 15; i++)
@ -1020,54 +1004,55 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
* GMII mode.
*/
spin_lock_bh(&hw->phy_lock);
if (hw->phy_type != SK_PHY_XMAC) {
/* Take PHY out of reset. */
r = skge_read32(hw, B2_GP_IO);
if (port == 0)
r |= GP_DIR_0|GP_IO_0;
else
r |= GP_DIR_2|GP_IO_2;
skge_write32(hw, B2_GP_IO, r);
skge_read32(hw, B2_GP_IO);
/* External Phy Handling */
/* Take PHY out of reset. */
r = skge_read32(hw, B2_GP_IO);
if (port == 0)
r |= GP_DIR_0|GP_IO_0;
else
r |= GP_DIR_2|GP_IO_2;
/* Enable GMII mode on the XMAC. */
xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
skge_write32(hw, B2_GP_IO, r);
skge_read32(hw, B2_GP_IO);
id1 = xm_phy_read(hw, port, PHY_XMAC_ID1);
/* Enable GMII mode on the XMAC. */
xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
/* Optimize MDIO transfer by suppressing preamble. */
xm_write16(hw, port, XM_MMU_CMD,
xm_read16(hw, port, XM_MMU_CMD)
| XM_MMU_NO_PRE);
id1 = xm_phy_read(hw, port, PHY_XMAC_ID1);
if (id1 == PHY_BCOM_ID1_C0) {
/*
* Workaround BCOM Errata for the C0 type.
* Write magic patterns to reserved registers.
*/
for (i = 0; i < ARRAY_SIZE(C0hack); i++)
xm_phy_write(hw, port,
C0hack[i].reg, C0hack[i].val);
} else if (id1 == PHY_BCOM_ID1_A1) {
/*
* Workaround BCOM Errata for the A1 type.
* Write magic patterns to reserved registers.
*/
for (i = 0; i < ARRAY_SIZE(A1hack); i++)
xm_phy_write(hw, port,
A1hack[i].reg, A1hack[i].val);
}
/* Optimize MDIO transfer by suppressing preamble. */
xm_write16(hw, port, XM_MMU_CMD,
xm_read16(hw, port, XM_MMU_CMD)
| XM_MMU_NO_PRE);
if (id1 == PHY_BCOM_ID1_C0) {
/*
* Workaround BCOM Errata (#10523) for all BCom PHYs.
* Disable Power Management after reset.
* Workaround BCOM Errata for the C0 type.
* Write magic patterns to reserved registers.
*/
r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL);
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM);
for (i = 0; i < ARRAY_SIZE(C0hack); i++)
xm_phy_write(hw, port,
C0hack[i].reg, C0hack[i].val);
} else if (id1 == PHY_BCOM_ID1_A1) {
/*
* Workaround BCOM Errata for the A1 type.
* Write magic patterns to reserved registers.
*/
for (i = 0; i < ARRAY_SIZE(A1hack); i++)
xm_phy_write(hw, port,
A1hack[i].reg, A1hack[i].val);
}
/*
* Workaround BCOM Errata (#10523) for all BCom PHYs.
* Disable Power Management after reset.
*/
r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL);
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM);
/* Dummy read */
xm_read16(hw, port, XM_ISRC);
@ -1098,8 +1083,8 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
*/
r = xm_read32(hw, port, XM_MODE);
xm_write32(hw, port, XM_MODE,
XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT|
XM_MD_RX_ERR|XM_MD_RX_IRLE);
XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT|
XM_MD_RX_ERR|XM_MD_RX_IRLE);
xm_outaddr(hw, port, XM_SA, hw->dev[port]->dev_addr);
xm_outaddr(hw, port, XM_EXM(0), hw->dev[port]->dev_addr);
@ -1150,103 +1135,70 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
else
xm_write16(hw, port, XM_RX_CMD, r & ~(XM_RX_BIG_PK_OK));
switch (hw->phy_type) {
case SK_PHY_XMAC:
if (skge->autoneg == AUTONEG_ENABLE) {
ctrl1 = PHY_X_AN_FD | PHY_X_AN_HD;
/* Broadcom phy initialization */
ctrl1 = PHY_CT_SP1000;
ctrl2 = 0;
ctrl3 = PHY_AN_CSMA;
ctrl4 = PHY_B_PEC_EN_LTR;
ctrl5 = PHY_B_AC_TX_TST;
switch (skge->flow_control) {
case FLOW_MODE_NONE:
ctrl1 |= PHY_X_P_NO_PAUSE;
break;
case FLOW_MODE_LOC_SEND:
ctrl1 |= PHY_X_P_ASYM_MD;
break;
case FLOW_MODE_SYMMETRIC:
ctrl1 |= PHY_X_P_SYM_MD;
break;
case FLOW_MODE_REM_SEND:
ctrl1 |= PHY_X_P_BOTH_MD;
break;
}
if (skge->autoneg == AUTONEG_ENABLE) {
/*
* Workaround BCOM Errata #1 for the C5 type.
* 1000Base-T Link Acquisition Failure in Slave Mode
* Set Repeater/DTE bit 10 of the 1000Base-T Control Register
*/
ctrl2 |= PHY_B_1000C_RD;
if (skge->advertising & ADVERTISED_1000baseT_Half)
ctrl2 |= PHY_B_1000C_AHD;
if (skge->advertising & ADVERTISED_1000baseT_Full)
ctrl2 |= PHY_B_1000C_AFD;
xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl1);
ctrl2 = PHY_CT_ANE | PHY_CT_RE_CFG;
} else {
ctrl2 = 0;
if (skge->duplex == DUPLEX_FULL)
ctrl2 |= PHY_CT_DUP_MD;
/* Set Flow-control capabilities */
switch (skge->flow_control) {
case FLOW_MODE_NONE:
ctrl3 |= PHY_B_P_NO_PAUSE;
break;
case FLOW_MODE_LOC_SEND:
ctrl3 |= PHY_B_P_ASYM_MD;
break;
case FLOW_MODE_SYMMETRIC:
ctrl3 |= PHY_B_P_SYM_MD;
break;
case FLOW_MODE_REM_SEND:
ctrl3 |= PHY_B_P_BOTH_MD;
break;
}
xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl2);
break;
/* Restart Auto-negotiation */
ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG;
} else {
if (skge->duplex == DUPLEX_FULL)
ctrl1 |= PHY_CT_DUP_MD;
case SK_PHY_BCOM:
ctrl1 = PHY_CT_SP1000;
ctrl2 = 0;
ctrl3 = PHY_AN_CSMA;
ctrl4 = PHY_B_PEC_EN_LTR;
ctrl5 = PHY_B_AC_TX_TST;
if (skge->autoneg == AUTONEG_ENABLE) {
/*
* Workaround BCOM Errata #1 for the C5 type.
* 1000Base-T Link Acquisition Failure in Slave Mode
* Set Repeater/DTE bit 10 of the 1000Base-T Control Register
*/
ctrl2 |= PHY_B_1000C_RD;
if (skge->advertising & ADVERTISED_1000baseT_Half)
ctrl2 |= PHY_B_1000C_AHD;
if (skge->advertising & ADVERTISED_1000baseT_Full)
ctrl2 |= PHY_B_1000C_AFD;
/* Set Flow-control capabilities */
switch (skge->flow_control) {
case FLOW_MODE_NONE:
ctrl3 |= PHY_B_P_NO_PAUSE;
break;
case FLOW_MODE_LOC_SEND:
ctrl3 |= PHY_B_P_ASYM_MD;
break;
case FLOW_MODE_SYMMETRIC:
ctrl3 |= PHY_B_P_SYM_MD;
break;
case FLOW_MODE_REM_SEND:
ctrl3 |= PHY_B_P_BOTH_MD;
break;
}
/* Restart Auto-negotiation */
ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG;
} else {
if (skge->duplex == DUPLEX_FULL)
ctrl1 |= PHY_CT_DUP_MD;
ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */
}
xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2);
xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3);
if (skge->netdev->mtu > ETH_DATA_LEN) {
ctrl4 |= PHY_B_PEC_HIGH_LA;
ctrl5 |= PHY_B_AC_LONG_PACK;
xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5);
}
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4);
xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1);
break;
ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */
}
xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2);
xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3);
if (skge->netdev->mtu > ETH_DATA_LEN) {
ctrl4 |= PHY_B_PEC_HIGH_LA;
ctrl5 |= PHY_B_AC_LONG_PACK;
xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5);
}
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4);
xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1);
spin_unlock_bh(&hw->phy_lock);
/* Clear MIB counters */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* Clear two times according to Errata #3 */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* Start polling for link status */
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
@ -1256,6 +1208,7 @@ static void genesis_stop(struct skge_port *skge)
{
struct skge_hw *hw = skge->hw;
int port = skge->port;
u32 reg;
/* Clear Tx packet arbiter timeout IRQ */
skge_write16(hw, B3_PA_CTRL,
@ -1273,19 +1226,16 @@ static void genesis_stop(struct skge_port *skge)
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
/* For external PHYs there must be special handling */
if (hw->phy_type != SK_PHY_XMAC) {
u32 reg = skge_read32(hw, B2_GP_IO);
if (port == 0) {
reg |= GP_DIR_0;
reg &= ~GP_IO_0;
} else {
reg |= GP_DIR_2;
reg &= ~GP_IO_2;
}
skge_write32(hw, B2_GP_IO, reg);
skge_read32(hw, B2_GP_IO);
reg = skge_read32(hw, B2_GP_IO);
if (port == 0) {
reg |= GP_DIR_0;
reg &= ~GP_IO_0;
} else {
reg |= GP_DIR_2;
reg &= ~GP_IO_2;
}
skge_write32(hw, B2_GP_IO, reg);
skge_read32(hw, B2_GP_IO);
xm_write16(hw, port, XM_MMU_CMD,
xm_read16(hw, port, XM_MMU_CMD)
@ -1329,16 +1279,6 @@ static void genesis_mac_intr(struct skge_hw *hw, int port)
u16 status = xm_read16(hw, port, XM_ISRC);
pr_debug("genesis_intr status %x\n", status);
if (hw->phy_type == SK_PHY_XMAC) {
/* LInk down, start polling for state change */
if (status & XM_IS_INP_ASS) {
xm_write16(hw, port, XM_IMSK,
xm_read16(hw, port, XM_IMSK) | XM_IS_INP_ASS);
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
}
else if (status & XM_IS_AND)
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
}
if (status & XM_IS_TXF_UR) {
xm_write32(hw, port, XM_MODE, XM_MD_FTF);
@ -1458,28 +1398,25 @@ static void genesis_link_up(struct skge_port *skge)
xm_write32(hw, port, XM_MODE, mode);
msk = XM_DEF_MSK;
if (hw->phy_type != SK_PHY_XMAC)
msk |= XM_IS_INP_ASS; /* disable GP0 interrupt bit */
/* disable GP0 interrupt bit for external Phy */
msk |= XM_IS_INP_ASS;
xm_write16(hw, port, XM_IMSK, msk);
xm_read16(hw, port, XM_ISRC);
/* get MMU Command Reg. */
cmd = xm_read16(hw, port, XM_MMU_CMD);
if (hw->phy_type != SK_PHY_XMAC && skge->duplex == DUPLEX_FULL)
if (skge->duplex == DUPLEX_FULL)
cmd |= XM_MMU_GMII_FD;
if (hw->phy_type == SK_PHY_BCOM) {
/*
* Workaround BCOM Errata (#10523) for all BCom Phys
* Enable Power Management after link up
*/
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL,
xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL)
& ~PHY_B_AC_DIS_PM);
xm_phy_write(hw, port, PHY_BCOM_INT_MASK,
PHY_B_DEF_MSK);
}
/*
* Workaround BCOM Errata (#10523) for all BCom Phys
* Enable Power Management after link up
*/
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL,
xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL)
& ~PHY_B_AC_DIS_PM);
xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK);
/* enable Rx/Tx */
xm_write16(hw, port, XM_MMU_CMD,
@ -1551,25 +1488,12 @@ static void skge_link_timer(unsigned long __arg)
{
struct skge_port *skge = (struct skge_port *) __arg;
struct skge_hw *hw = skge->hw;
int port = skge->port;
if (hw->chip_id != CHIP_ID_GENESIS || !netif_running(skge->netdev))
return;
spin_lock_bh(&hw->phy_lock);
if (hw->phy_type == SK_PHY_BCOM)
genesis_bcom_intr(skge);
else {
int i;
for (i = 0; i < 3; i++)
if (xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS)
break;
if (i == 3)
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
else
genesis_link_up(skge);
}
genesis_bcom_intr(skge);
spin_unlock_bh(&hw->phy_lock);
}
@ -2737,7 +2661,7 @@ static void skge_extirq(unsigned long data)
if (hw->chip_id != CHIP_ID_GENESIS)
yukon_phy_intr(skge);
else if (hw->phy_type == SK_PHY_BCOM)
else
genesis_bcom_intr(skge);
}
}
@ -2886,9 +2810,6 @@ static int skge_reset(struct skge_hw *hw)
switch (hw->chip_id) {
case CHIP_ID_GENESIS:
switch (hw->phy_type) {
case SK_PHY_XMAC:
hw->phy_addr = PHY_ADDR_XMAC;
break;
case SK_PHY_BCOM:
hw->phy_addr = PHY_ADDR_BCOM;
break;