lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

[MIPS] kgdb: Remove existing implementation

Browse Source 
This patch explicitly removes the kgdb implementation, for mips which
is intended to be followed by a patch that adds a kgdb implementation
for MIPS that makes use of the kgdb core in the kernel.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Jason Wessel
2008-07-29 15:58:52 -05:00
committed by Ralf Baechle
parent 8f8da9adeb
commit 8d60a903d9
59 changed files with 4 additions and 3134 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
arch/mips/nxp/pnx8550/common/Makefile
View File

@@ -24,6 +24,5 @@
obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_KGDB) += gdb_hook.o
EXTRA_CFLAGS += -Werror

109
arch/mips/nxp/pnx8550/common/gdb_hook.c
View File

@@ -1,109 +0,0 @@
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
* This is the interface to the remote debugger stub.
*
*/
#include <linux/types.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#include <linux/serial_reg.h>
#include <linux/serial_ip3106.h>
#include <asm/serial.h>
#include <asm/io.h>
#include <uart.h>
static struct serial_state rs_table[IP3106_NR_PORTS] = {
};
static struct async_struct kdb_port_info = {0};
void rs_kgdb_hook(int tty_no)
{
struct serial_state *ser = &rs_table[tty_no];
kdb_port_info.state = ser;
kdb_port_info.magic = SERIAL_MAGIC;
kdb_port_info.port = tty_no;
kdb_port_info.flags = ser->flags;
/*
* Clear all interrupts
*/
/* Clear all the transmitter FIFO counters (pointer and status) */
ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
/* Clear all the receiver FIFO counters (pointer and status) */
ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
/* Clear all interrupts */
ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
IP3106_UART_INT_ALLTX;
/*
* Now, initialize the UART
*/
ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
}
int putDebugChar(char c)
{
/* Wait until FIFO not full */
while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
;
/* Send one char */
ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
return 1;
}
char getDebugChar(void)
{
char ch;
/* Wait until there is a char in the FIFO */
while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
IP3106_UART_FIFO_RXFIFO) >> 8))
;
/* Read one char */
ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
IP3106_UART_FIFO_RBRTHR;
/* Advance the RX FIFO read pointer */
ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
return (ch);
}
void rs_disable_debug_interrupts(void)
{
ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
}
void rs_enable_debug_interrupts(void)
{
/* Clear all the transmitter FIFO counters (pointer and status) */
ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
/* Clear all the receiver FIFO counters (pointer and status) */
ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
/* Clear all interrupts */
ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
IP3106_UART_INT_ALLTX;
ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
}

1
arch/mips/nxp/pnx8550/common/int.c
View File

@@ -34,7 +34,6 @@
#include <linux/module.h>
#include <asm/io.h>
#include <asm/gdb-stub.h>
#include <int.h>
#include <uart.h>

1
arch/mips/nxp/pnx8550/common/proc.c
View File

@@ -22,7 +22,6 @@
#include <linux/random.h>
#include <asm/io.h>
#include <asm/gdb-stub.h>
#include <int.h>
#include <uart.h>

12
arch/mips/nxp/pnx8550/common/setup.c
View File

@@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void);
extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
extern void rs_kgdb_hook(int tty_no);
extern char *prom_getcmdline(void);
struct resource standard_io_resources[] = {
@@ -142,16 +141,5 @@ void __init plat_mem_setup(void)
ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
}
#ifdef CONFIG_KGDB
argptr = prom_getcmdline();
if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
int line;
argptr += strlen("kgdb=ttyS");
line = *argptr == '0' ? 0 : 1;
rs_kgdb_hook(line);
pr_info("KGDB: Using ttyS%i for session, "
"please connect your debugger\n", line ? 1 : 0);
}
#endif
return;
}