powerpc/85xx: Rework P1010RDB and P1010 device tree
Utilize new split between board & SoC, and new SoC device trees split into pre & post utilizing 'template' includes for SoC IP blocks. Other changes include: * Moved to specifying interrupt-parent for mpic at root * Moved to 4-cell mpic interrupt cells to support MPIC timers * Dropping "fsl,p1010-IP..." from compatibles for standard blocks * PCI interrupt map - wrong IRQs for PCI-0 controller * SDHC interrupt sense was wrong Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Kumar Gala
197
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
Normal file
197
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
Normal file
@@ -0,0 +1,197 @@
|
|||||||
|
/*
|
||||||
|
* P1010/P1014 Silicon/SoC Device Tree Source (post include)
|
||||||
|
*
|
||||||
|
* Copyright 2011 Freescale Semiconductor Inc.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions are met:
|
||||||
|
* * Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* * Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* * Neither the name of Freescale Semiconductor nor the
|
||||||
|
* names of its contributors may be used to endorse or promote products
|
||||||
|
* derived from this software without specific prior written permission.
|
||||||
|
*
|
||||||
|
*
|
||||||
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||||
|
* GNU General Public License ("GPL") as published by the Free Software
|
||||||
|
* Foundation, either version 2 of that License or (at your option) any
|
||||||
|
* later version.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||||
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||||
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||||
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||||
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||||
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||||
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||||
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
&ifc {
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,ifc", "simple-bus";
|
||||||
|
interrupts = <16 2 0 0 19 2 0 0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* controller at 0x9000 */
|
||||||
|
&pci0 {
|
||||||
|
compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
|
||||||
|
device_type = "pci";
|
||||||
|
#size-cells = <2>;
|
||||||
|
#address-cells = <3>;
|
||||||
|
bus-range = <0 255>;
|
||||||
|
clock-frequency = <33333333>;
|
||||||
|
interrupts = <16 2 0 0>;
|
||||||
|
|
||||||
|
pcie@0 {
|
||||||
|
reg = <0 0 0 0 0>;
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
#size-cells = <2>;
|
||||||
|
#address-cells = <3>;
|
||||||
|
device_type = "pci";
|
||||||
|
interrupts = <16 2 0 0>;
|
||||||
|
interrupt-map-mask = <0xf800 0 0 7>;
|
||||||
|
interrupt-map = <
|
||||||
|
/* IDSEL 0x0 */
|
||||||
|
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
||||||
|
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
||||||
|
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
||||||
|
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
/* controller at 0xa000 */
|
||||||
|
&pci1 {
|
||||||
|
compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
|
||||||
|
device_type = "pci";
|
||||||
|
#size-cells = <2>;
|
||||||
|
#address-cells = <3>;
|
||||||
|
bus-range = <0 255>;
|
||||||
|
clock-frequency = <33333333>;
|
||||||
|
interrupts = <16 2 0 0>;
|
||||||
|
|
||||||
|
pcie@0 {
|
||||||
|
reg = <0 0 0 0 0>;
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
#size-cells = <2>;
|
||||||
|
#address-cells = <3>;
|
||||||
|
device_type = "pci";
|
||||||
|
interrupts = <16 2 0 0>;
|
||||||
|
interrupt-map-mask = <0xf800 0 0 7>;
|
||||||
|
|
||||||
|
interrupt-map = <
|
||||||
|
/* IDSEL 0x0 */
|
||||||
|
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||||
|
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||||
|
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||||
|
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&soc {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
device_type = "soc";
|
||||||
|
compatible = "fsl,p1010-immr", "simple-bus";
|
||||||
|
bus-frequency = <0>; // Filled out by uboot.
|
||||||
|
|
||||||
|
ecm-law@0 {
|
||||||
|
compatible = "fsl,ecm-law";
|
||||||
|
reg = <0x0 0x1000>;
|
||||||
|
fsl,num-laws = <12>;
|
||||||
|
};
|
||||||
|
|
||||||
|
ecm@1000 {
|
||||||
|
compatible = "fsl,p1010-ecm", "fsl,ecm";
|
||||||
|
reg = <0x1000 0x1000>;
|
||||||
|
interrupts = <16 2 0 0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
memory-controller@2000 {
|
||||||
|
compatible = "fsl,p1010-memory-controller";
|
||||||
|
reg = <0x2000 0x1000>;
|
||||||
|
interrupts = <16 2 0 0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
/include/ "pq3-i2c-0.dtsi"
|
||||||
|
/include/ "pq3-i2c-1.dtsi"
|
||||||
|
/include/ "pq3-duart-0.dtsi"
|
||||||
|
/include/ "pq3-espi-0.dtsi"
|
||||||
|
spi0: spi@7000 {
|
||||||
|
fsl,espi-num-chipselects = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
/include/ "pq3-gpio-0.dtsi"
|
||||||
|
/include/ "pq3-sata2-0.dtsi"
|
||||||
|
/include/ "pq3-sata2-1.dtsi"
|
||||||
|
|
||||||
|
can0: can@1c000 {
|
||||||
|
compatible = "fsl,p1010-flexcan";
|
||||||
|
reg = <0x1c000 0x1000>;
|
||||||
|
interrupts = <48 0x2 0 0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
can1: can@1d000 {
|
||||||
|
compatible = "fsl,p1010-flexcan";
|
||||||
|
reg = <0x1d000 0x1000>;
|
||||||
|
interrupts = <61 0x2 0 0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
L2: l2-cache-controller@20000 {
|
||||||
|
compatible = "fsl,p1010-l2-cache-controller",
|
||||||
|
"fsl,p1014-l2-cache-controller";
|
||||||
|
reg = <0x20000 0x1000>;
|
||||||
|
cache-line-size = <32>; // 32 bytes
|
||||||
|
cache-size = <0x40000>; // L2,256K
|
||||||
|
interrupts = <16 2 0 0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
/include/ "pq3-dma-0.dtsi"
|
||||||
|
/include/ "pq3-usb2-dr-0.dtsi"
|
||||||
|
/include/ "pq3-esdhc-0.dtsi"
|
||||||
|
sdhc@2e000 {
|
||||||
|
fsl,sdhci-auto-cmd12;
|
||||||
|
};
|
||||||
|
|
||||||
|
/include/ "pq3-mpic.dtsi"
|
||||||
|
/include/ "pq3-mpic-timer-B.dtsi"
|
||||||
|
|
||||||
|
/include/ "pq3-etsec2-0.dtsi"
|
||||||
|
enet0: ethernet@b0000 {
|
||||||
|
queue-group@b0000 {
|
||||||
|
fsl,rx-bit-map = <0xff>;
|
||||||
|
fsl,tx-bit-map = <0xff>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
/include/ "pq3-etsec2-1.dtsi"
|
||||||
|
enet1: ethernet@b1000 {
|
||||||
|
queue-group@b1000 {
|
||||||
|
fsl,rx-bit-map = <0xff>;
|
||||||
|
fsl,tx-bit-map = <0xff>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
/include/ "pq3-etsec2-2.dtsi"
|
||||||
|
enet2: ethernet@b2000 {
|
||||||
|
queue-group@b2000 {
|
||||||
|
fsl,rx-bit-map = <0xff>;
|
||||||
|
fsl,tx-bit-map = <0xff>;
|
||||||
|
};
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
global-utilities@e0000 {
|
||||||
|
compatible = "fsl,p1010-guts";
|
||||||
|
reg = <0xe0000 0x1000>;
|
||||||
|
fsl,has-rstcr;
|
||||||
|
};
|
||||||
|
};
|
||||||
64
arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
Normal file
64
arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
Normal file
@@ -0,0 +1,64 @@
|
|||||||
|
/*
|
||||||
|
* P1010/P1014 Silicon/SoC Device Tree Source (pre include)
|
||||||
|
*
|
||||||
|
* Copyright 2011 Freescale Semiconductor Inc.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions are met:
|
||||||
|
* * Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* * Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* * Neither the name of Freescale Semiconductor nor the
|
||||||
|
* names of its contributors may be used to endorse or promote products
|
||||||
|
* derived from this software without specific prior written permission.
|
||||||
|
*
|
||||||
|
*
|
||||||
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||||
|
* GNU General Public License ("GPL") as published by the Free Software
|
||||||
|
* Foundation, either version 2 of that License or (at your option) any
|
||||||
|
* later version.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||||
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||||
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||||
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||||
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||||
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||||
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||||
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
/ {
|
||||||
|
compatible = "fsl,P1010";
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <2>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
serial0 = &serial0;
|
||||||
|
serial1 = &serial1;
|
||||||
|
ethernet0 = &enet0;
|
||||||
|
ethernet1 = &enet1;
|
||||||
|
ethernet2 = &enet2;
|
||||||
|
pci0 = &pci0;
|
||||||
|
pci1 = &pci1;
|
||||||
|
can0 = &can0;
|
||||||
|
can1 = &can1;
|
||||||
|
};
|
||||||
|
|
||||||
|
cpus {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
PowerPC,P1010@0 {
|
||||||
|
device_type = "cpu";
|
||||||
|
reg = <0x0>;
|
||||||
|
next-level-cache = <&L2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
@@ -9,230 +9,33 @@
|
|||||||
* option) any later version.
|
* option) any later version.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
/include/ "p1010si.dtsi"
|
/include/ "fsl/p1010si-pre.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "fsl,P1010RDB";
|
model = "fsl,P1010RDB";
|
||||||
compatible = "fsl,P1010RDB";
|
compatible = "fsl,P1010RDB";
|
||||||
|
|
||||||
aliases {
|
|
||||||
serial0 = &serial0;
|
|
||||||
serial1 = &serial1;
|
|
||||||
ethernet0 = &enet0;
|
|
||||||
ethernet1 = &enet1;
|
|
||||||
ethernet2 = &enet2;
|
|
||||||
pci0 = &pci0;
|
|
||||||
pci1 = &pci1;
|
|
||||||
can0 = &can0;
|
|
||||||
can1 = &can1;
|
|
||||||
};
|
|
||||||
|
|
||||||
memory {
|
memory {
|
||||||
device_type = "memory";
|
device_type = "memory";
|
||||||
};
|
};
|
||||||
|
|
||||||
ifc@ffe1e000 {
|
board_ifc: ifc: ifc@ffe1e000 {
|
||||||
/* NOR, NAND Flashes and CPLD on board */
|
/* NOR, NAND Flashes and CPLD on board */
|
||||||
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
|
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
|
||||||
0x1 0x0 0x0 0xff800000 0x00010000
|
0x1 0x0 0x0 0xff800000 0x00010000
|
||||||
0x3 0x0 0x0 0xffb00000 0x00000020>;
|
0x3 0x0 0x0 0xffb00000 0x00000020>;
|
||||||
|
reg = <0x0 0xffe1e000 0 0x2000>;
|
||||||
nor@0,0 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
compatible = "cfi-flash";
|
|
||||||
reg = <0x0 0x0 0x2000000>;
|
|
||||||
bank-width = <2>;
|
|
||||||
device-width = <1>;
|
|
||||||
|
|
||||||
partition@40000 {
|
|
||||||
/* 256KB for DTB Image */
|
|
||||||
reg = <0x00040000 0x00040000>;
|
|
||||||
label = "NOR DTB Image";
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@80000 {
|
|
||||||
/* 7 MB for Linux Kernel Image */
|
|
||||||
reg = <0x00080000 0x00700000>;
|
|
||||||
label = "NOR Linux Kernel Image";
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@800000 {
|
|
||||||
/* 20MB for JFFS2 based Root file System */
|
|
||||||
reg = <0x00800000 0x01400000>;
|
|
||||||
label = "NOR JFFS2 Root File System";
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@1f00000 {
|
|
||||||
/* This location must not be altered */
|
|
||||||
/* 512KB for u-boot Bootloader Image */
|
|
||||||
/* 512KB for u-boot Environment Variables */
|
|
||||||
reg = <0x01f00000 0x00100000>;
|
|
||||||
label = "NOR U-Boot Image";
|
|
||||||
read-only;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
nand@1,0 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
compatible = "fsl,ifc-nand";
|
|
||||||
reg = <0x1 0x0 0x10000>;
|
|
||||||
|
|
||||||
partition@0 {
|
|
||||||
/* This location must not be altered */
|
|
||||||
/* 1MB for u-boot Bootloader Image */
|
|
||||||
reg = <0x0 0x00100000>;
|
|
||||||
label = "NAND U-Boot Image";
|
|
||||||
read-only;
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@100000 {
|
|
||||||
/* 1MB for DTB Image */
|
|
||||||
reg = <0x00100000 0x00100000>;
|
|
||||||
label = "NAND DTB Image";
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@200000 {
|
|
||||||
/* 4MB for Linux Kernel Image */
|
|
||||||
reg = <0x00200000 0x00400000>;
|
|
||||||
label = "NAND Linux Kernel Image";
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@600000 {
|
|
||||||
/* 4MB for Compressed Root file System Image */
|
|
||||||
reg = <0x00600000 0x00400000>;
|
|
||||||
label = "NAND Compressed RFS Image";
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@a00000 {
|
|
||||||
/* 15MB for JFFS2 based Root file System */
|
|
||||||
reg = <0x00a00000 0x00f00000>;
|
|
||||||
label = "NAND JFFS2 Root File System";
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@1900000 {
|
|
||||||
/* 7MB for User Area */
|
|
||||||
reg = <0x01900000 0x00700000>;
|
|
||||||
label = "NAND User area";
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
cpld@3,0 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
compatible = "fsl,p1010rdb-cpld";
|
|
||||||
reg = <0x3 0x0 0x0000020>;
|
|
||||||
bank-width = <1>;
|
|
||||||
device-width = <1>;
|
|
||||||
};
|
|
||||||
};
|
};
|
||||||
|
|
||||||
soc@ffe00000 {
|
board_soc: soc: soc@ffe00000 {
|
||||||
spi@7000 {
|
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||||
flash@0 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
compatible = "spansion,s25sl12801";
|
|
||||||
reg = <0>;
|
|
||||||
spi-max-frequency = <50000000>;
|
|
||||||
|
|
||||||
partition@0 {
|
|
||||||
/* 1MB for u-boot Bootloader Image */
|
|
||||||
/* 1MB for Environment */
|
|
||||||
reg = <0x0 0x00100000>;
|
|
||||||
label = "SPI Flash U-Boot Image";
|
|
||||||
read-only;
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@100000 {
|
|
||||||
/* 512KB for DTB Image */
|
|
||||||
reg = <0x00100000 0x00080000>;
|
|
||||||
label = "SPI Flash DTB Image";
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@180000 {
|
|
||||||
/* 4MB for Linux Kernel Image */
|
|
||||||
reg = <0x00180000 0x00400000>;
|
|
||||||
label = "SPI Flash Linux Kernel Image";
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@580000 {
|
|
||||||
/* 4MB for Compressed RFS Image */
|
|
||||||
reg = <0x00580000 0x00400000>;
|
|
||||||
label = "SPI Flash Compressed RFSImage";
|
|
||||||
};
|
|
||||||
|
|
||||||
partition@980000 {
|
|
||||||
/* 6.5MB for JFFS2 based RFS */
|
|
||||||
reg = <0x00980000 0x00680000>;
|
|
||||||
label = "SPI Flash JFFS2 RFS";
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
usb@22000 {
|
|
||||||
phy_type = "utmi";
|
|
||||||
};
|
|
||||||
|
|
||||||
mdio@24000 {
|
|
||||||
phy0: ethernet-phy@0 {
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <3 1>;
|
|
||||||
reg = <0x1>;
|
|
||||||
};
|
|
||||||
|
|
||||||
phy1: ethernet-phy@1 {
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <2 1>;
|
|
||||||
reg = <0x0>;
|
|
||||||
};
|
|
||||||
|
|
||||||
phy2: ethernet-phy@2 {
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <2 1>;
|
|
||||||
reg = <0x2>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
enet0: ethernet@b0000 {
|
|
||||||
phy-handle = <&phy0>;
|
|
||||||
phy-connection-type = "rgmii-id";
|
|
||||||
};
|
|
||||||
|
|
||||||
enet1: ethernet@b1000 {
|
|
||||||
phy-handle = <&phy1>;
|
|
||||||
tbi-handle = <&tbi0>;
|
|
||||||
phy-connection-type = "sgmii";
|
|
||||||
};
|
|
||||||
|
|
||||||
enet2: ethernet@b2000 {
|
|
||||||
phy-handle = <&phy2>;
|
|
||||||
tbi-handle = <&tbi1>;
|
|
||||||
phy-connection-type = "sgmii";
|
|
||||||
};
|
|
||||||
};
|
};
|
||||||
|
|
||||||
pci0: pcie@ffe09000 {
|
pci0: pcie@ffe09000 {
|
||||||
|
reg = <0 0xffe09000 0 0x1000>;
|
||||||
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
||||||
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
||||||
pcie@0 {
|
pcie@0 {
|
||||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
||||||
#interrupt-cells = <1>;
|
|
||||||
#size-cells = <2>;
|
|
||||||
#address-cells = <3>;
|
|
||||||
device_type = "pci";
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <16 2>;
|
|
||||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
||||||
interrupt-map = <
|
|
||||||
/* IDSEL 0x0 */
|
|
||||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1
|
|
||||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1
|
|
||||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1
|
|
||||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1
|
|
||||||
>;
|
|
||||||
|
|
||||||
ranges = <0x2000000 0x0 0xa0000000
|
ranges = <0x2000000 0x0 0xa0000000
|
||||||
0x2000000 0x0 0xa0000000
|
0x2000000 0x0 0xa0000000
|
||||||
0x0 0x20000000
|
0x0 0x20000000
|
||||||
@@ -244,24 +47,10 @@
|
|||||||
};
|
};
|
||||||
|
|
||||||
pci1: pcie@ffe0a000 {
|
pci1: pcie@ffe0a000 {
|
||||||
|
reg = <0 0xffe0a000 0 0x1000>;
|
||||||
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
||||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||||
pcie@0 {
|
pcie@0 {
|
||||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
||||||
#interrupt-cells = <1>;
|
|
||||||
#size-cells = <2>;
|
|
||||||
#address-cells = <3>;
|
|
||||||
device_type = "pci";
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <16 2>;
|
|
||||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
||||||
interrupt-map = <
|
|
||||||
/* IDSEL 0x0 */
|
|
||||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1
|
|
||||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1
|
|
||||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1
|
|
||||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1
|
|
||||||
>;
|
|
||||||
ranges = <0x2000000 0x0 0x80000000
|
ranges = <0x2000000 0x0 0x80000000
|
||||||
0x2000000 0x0 0x80000000
|
0x2000000 0x0 0x80000000
|
||||||
0x0 0x20000000
|
0x0 0x20000000
|
||||||
@@ -272,3 +61,6 @@
|
|||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
/include/ "p1010rdb.dtsi"
|
||||||
|
/include/ "fsl/p1010si-post.dtsi"
|
||||||
|
|||||||
222
arch/powerpc/boot/dts/p1010rdb.dtsi
Normal file
222
arch/powerpc/boot/dts/p1010rdb.dtsi
Normal file
@@ -0,0 +1,222 @@
|
|||||||
|
/*
|
||||||
|
* P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
|
||||||
|
*
|
||||||
|
* Copyright 2011 Freescale Semiconductor Inc.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions are met:
|
||||||
|
* * Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* * Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* * Neither the name of Freescale Semiconductor nor the
|
||||||
|
* names of its contributors may be used to endorse or promote products
|
||||||
|
* derived from this software without specific prior written permission.
|
||||||
|
*
|
||||||
|
*
|
||||||
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||||
|
* GNU General Public License ("GPL") as published by the Free Software
|
||||||
|
* Foundation, either version 2 of that License or (at your option) any
|
||||||
|
* later version.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||||
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||||
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||||
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||||
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||||
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||||
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||||
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
&board_ifc {
|
||||||
|
nor@0,0 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "cfi-flash";
|
||||||
|
reg = <0x0 0x0 0x2000000>;
|
||||||
|
bank-width = <2>;
|
||||||
|
device-width = <1>;
|
||||||
|
|
||||||
|
partition@40000 {
|
||||||
|
/* 256KB for DTB Image */
|
||||||
|
reg = <0x00040000 0x00040000>;
|
||||||
|
label = "NOR DTB Image";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@80000 {
|
||||||
|
/* 7 MB for Linux Kernel Image */
|
||||||
|
reg = <0x00080000 0x00700000>;
|
||||||
|
label = "NOR Linux Kernel Image";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@800000 {
|
||||||
|
/* 20MB for JFFS2 based Root file System */
|
||||||
|
reg = <0x00800000 0x01400000>;
|
||||||
|
label = "NOR JFFS2 Root File System";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@1f00000 {
|
||||||
|
/* This location must not be altered */
|
||||||
|
/* 512KB for u-boot Bootloader Image */
|
||||||
|
/* 512KB for u-boot Environment Variables */
|
||||||
|
reg = <0x01f00000 0x00100000>;
|
||||||
|
label = "NOR U-Boot Image";
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
nand@1,0 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,ifc-nand";
|
||||||
|
reg = <0x1 0x0 0x10000>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
/* This location must not be altered */
|
||||||
|
/* 1MB for u-boot Bootloader Image */
|
||||||
|
reg = <0x0 0x00100000>;
|
||||||
|
label = "NAND U-Boot Image";
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@100000 {
|
||||||
|
/* 1MB for DTB Image */
|
||||||
|
reg = <0x00100000 0x00100000>;
|
||||||
|
label = "NAND DTB Image";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@200000 {
|
||||||
|
/* 4MB for Linux Kernel Image */
|
||||||
|
reg = <0x00200000 0x00400000>;
|
||||||
|
label = "NAND Linux Kernel Image";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@600000 {
|
||||||
|
/* 4MB for Compressed Root file System Image */
|
||||||
|
reg = <0x00600000 0x00400000>;
|
||||||
|
label = "NAND Compressed RFS Image";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@a00000 {
|
||||||
|
/* 15MB for JFFS2 based Root file System */
|
||||||
|
reg = <0x00a00000 0x00f00000>;
|
||||||
|
label = "NAND JFFS2 Root File System";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@1900000 {
|
||||||
|
/* 7MB for User Area */
|
||||||
|
reg = <0x01900000 0x00700000>;
|
||||||
|
label = "NAND User area";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
cpld@3,0 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,p1010rdb-cpld";
|
||||||
|
reg = <0x3 0x0 0x0000020>;
|
||||||
|
bank-width = <1>;
|
||||||
|
device-width = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&board_soc {
|
||||||
|
spi@7000 {
|
||||||
|
flash@0 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "spansion,s25sl12801";
|
||||||
|
reg = <0>;
|
||||||
|
spi-max-frequency = <50000000>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
/* 1MB for u-boot Bootloader Image */
|
||||||
|
/* 1MB for Environment */
|
||||||
|
reg = <0x0 0x00100000>;
|
||||||
|
label = "SPI Flash U-Boot Image";
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@100000 {
|
||||||
|
/* 512KB for DTB Image */
|
||||||
|
reg = <0x00100000 0x00080000>;
|
||||||
|
label = "SPI Flash DTB Image";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@180000 {
|
||||||
|
/* 4MB for Linux Kernel Image */
|
||||||
|
reg = <0x00180000 0x00400000>;
|
||||||
|
label = "SPI Flash Linux Kernel Image";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@580000 {
|
||||||
|
/* 4MB for Compressed RFS Image */
|
||||||
|
reg = <0x00580000 0x00400000>;
|
||||||
|
label = "SPI Flash Compressed RFSImage";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@980000 {
|
||||||
|
/* 6.5MB for JFFS2 based RFS */
|
||||||
|
reg = <0x00980000 0x00680000>;
|
||||||
|
label = "SPI Flash JFFS2 RFS";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
usb@22000 {
|
||||||
|
phy_type = "utmi";
|
||||||
|
dr_mode = "host";
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio@24000 {
|
||||||
|
phy0: ethernet-phy@0 {
|
||||||
|
interrupts = <3 1 0 0>;
|
||||||
|
reg = <0x1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
phy1: ethernet-phy@1 {
|
||||||
|
interrupts = <2 1 0 0>;
|
||||||
|
reg = <0x0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
phy2: ethernet-phy@2 {
|
||||||
|
interrupts = <2 1 0 0>;
|
||||||
|
reg = <0x2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio@25000 {
|
||||||
|
tbi0: tbi-phy@11 {
|
||||||
|
reg = <0x11>;
|
||||||
|
device_type = "tbi-phy";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio@26000 {
|
||||||
|
tbi1: tbi-phy@11 {
|
||||||
|
reg = <0x11>;
|
||||||
|
device_type = "tbi-phy";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
enet0: ethernet@b0000 {
|
||||||
|
phy-handle = <&phy0>;
|
||||||
|
phy-connection-type = "rgmii-id";
|
||||||
|
};
|
||||||
|
|
||||||
|
enet1: ethernet@b1000 {
|
||||||
|
phy-handle = <&phy1>;
|
||||||
|
tbi-handle = <&tbi0>;
|
||||||
|
phy-connection-type = "sgmii";
|
||||||
|
};
|
||||||
|
|
||||||
|
enet2: ethernet@b2000 {
|
||||||
|
phy-handle = <&phy2>;
|
||||||
|
tbi-handle = <&tbi1>;
|
||||||
|
phy-connection-type = "sgmii";
|
||||||
|
};
|
||||||
|
};
|
||||||
@@ -1,374 +0,0 @@
|
|||||||
/*
|
|
||||||
* P1010si Device Tree Source
|
|
||||||
*
|
|
||||||
* Copyright 2011 Freescale Semiconductor Inc.
|
|
||||||
*
|
|
||||||
* This program is free software; you can redistribute it and/or modify it
|
|
||||||
* under the terms of the GNU General Public License as published by the
|
|
||||||
* Free Software Foundation; either version 2 of the License, or (at your
|
|
||||||
* option) any later version.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/dts-v1/;
|
|
||||||
/ {
|
|
||||||
compatible = "fsl,P1010";
|
|
||||||
#address-cells = <2>;
|
|
||||||
#size-cells = <2>;
|
|
||||||
|
|
||||||
cpus {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
|
|
||||||
PowerPC,P1010@0 {
|
|
||||||
device_type = "cpu";
|
|
||||||
reg = <0x0>;
|
|
||||||
next-level-cache = <&L2>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
ifc@ffe1e000 {
|
|
||||||
#address-cells = <2>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
compatible = "fsl,ifc", "simple-bus";
|
|
||||||
reg = <0x0 0xffe1e000 0 0x2000>;
|
|
||||||
interrupts = <16 2 19 2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
};
|
|
||||||
|
|
||||||
soc@ffe00000 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
device_type = "soc";
|
|
||||||
compatible = "fsl,p1010-immr", "simple-bus";
|
|
||||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
|
||||||
bus-frequency = <0>; // Filled out by uboot.
|
|
||||||
|
|
||||||
ecm-law@0 {
|
|
||||||
compatible = "fsl,ecm-law";
|
|
||||||
reg = <0x0 0x1000>;
|
|
||||||
fsl,num-laws = <12>;
|
|
||||||
};
|
|
||||||
|
|
||||||
ecm@1000 {
|
|
||||||
compatible = "fsl,p1010-ecm", "fsl,ecm";
|
|
||||||
reg = <0x1000 0x1000>;
|
|
||||||
interrupts = <16 2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
};
|
|
||||||
|
|
||||||
memory-controller@2000 {
|
|
||||||
compatible = "fsl,p1010-memory-controller";
|
|
||||||
reg = <0x2000 0x1000>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <16 2>;
|
|
||||||
};
|
|
||||||
|
|
||||||
i2c@3000 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
cell-index = <0>;
|
|
||||||
compatible = "fsl-i2c";
|
|
||||||
reg = <0x3000 0x100>;
|
|
||||||
interrupts = <43 2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
dfsrr;
|
|
||||||
};
|
|
||||||
|
|
||||||
i2c@3100 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
cell-index = <1>;
|
|
||||||
compatible = "fsl-i2c";
|
|
||||||
reg = <0x3100 0x100>;
|
|
||||||
interrupts = <43 2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
dfsrr;
|
|
||||||
};
|
|
||||||
|
|
||||||
serial0: serial@4500 {
|
|
||||||
cell-index = <0>;
|
|
||||||
device_type = "serial";
|
|
||||||
compatible = "ns16550";
|
|
||||||
reg = <0x4500 0x100>;
|
|
||||||
clock-frequency = <0>;
|
|
||||||
interrupts = <42 2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
};
|
|
||||||
|
|
||||||
serial1: serial@4600 {
|
|
||||||
cell-index = <1>;
|
|
||||||
device_type = "serial";
|
|
||||||
compatible = "ns16550";
|
|
||||||
reg = <0x4600 0x100>;
|
|
||||||
clock-frequency = <0>;
|
|
||||||
interrupts = <42 2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
};
|
|
||||||
|
|
||||||
spi@7000 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
compatible = "fsl,mpc8536-espi";
|
|
||||||
reg = <0x7000 0x1000>;
|
|
||||||
interrupts = <59 0x2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
fsl,espi-num-chipselects = <1>;
|
|
||||||
};
|
|
||||||
|
|
||||||
gpio: gpio-controller@f000 {
|
|
||||||
#gpio-cells = <2>;
|
|
||||||
compatible = "fsl,mpc8572-gpio";
|
|
||||||
reg = <0xf000 0x100>;
|
|
||||||
interrupts = <47 0x2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
gpio-controller;
|
|
||||||
};
|
|
||||||
|
|
||||||
sata@18000 {
|
|
||||||
compatible = "fsl,pq-sata-v2";
|
|
||||||
reg = <0x18000 0x1000>;
|
|
||||||
cell-index = <1>;
|
|
||||||
interrupts = <74 0x2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
};
|
|
||||||
|
|
||||||
sata@19000 {
|
|
||||||
compatible = "fsl,pq-sata-v2";
|
|
||||||
reg = <0x19000 0x1000>;
|
|
||||||
cell-index = <2>;
|
|
||||||
interrupts = <41 0x2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
};
|
|
||||||
|
|
||||||
can0: can@1c000 {
|
|
||||||
compatible = "fsl,p1010-flexcan";
|
|
||||||
reg = <0x1c000 0x1000>;
|
|
||||||
interrupts = <48 0x2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
};
|
|
||||||
|
|
||||||
can1: can@1d000 {
|
|
||||||
compatible = "fsl,p1010-flexcan";
|
|
||||||
reg = <0x1d000 0x1000>;
|
|
||||||
interrupts = <61 0x2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
};
|
|
||||||
|
|
||||||
L2: l2-cache-controller@20000 {
|
|
||||||
compatible = "fsl,p1010-l2-cache-controller",
|
|
||||||
"fsl,p1014-l2-cache-controller";
|
|
||||||
reg = <0x20000 0x1000>;
|
|
||||||
cache-line-size = <32>; // 32 bytes
|
|
||||||
cache-size = <0x40000>; // L2,256K
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <16 2>;
|
|
||||||
};
|
|
||||||
|
|
||||||
dma@21300 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
compatible = "fsl,p1010-dma", "fsl,eloplus-dma";
|
|
||||||
reg = <0x21300 0x4>;
|
|
||||||
ranges = <0x0 0x21100 0x200>;
|
|
||||||
cell-index = <0>;
|
|
||||||
dma-channel@0 {
|
|
||||||
compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
|
|
||||||
reg = <0x0 0x80>;
|
|
||||||
cell-index = <0>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <20 2>;
|
|
||||||
};
|
|
||||||
dma-channel@80 {
|
|
||||||
compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
|
|
||||||
reg = <0x80 0x80>;
|
|
||||||
cell-index = <1>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <21 2>;
|
|
||||||
};
|
|
||||||
dma-channel@100 {
|
|
||||||
compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
|
|
||||||
reg = <0x100 0x80>;
|
|
||||||
cell-index = <2>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <22 2>;
|
|
||||||
};
|
|
||||||
dma-channel@180 {
|
|
||||||
compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
|
|
||||||
reg = <0x180 0x80>;
|
|
||||||
cell-index = <3>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <23 2>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
usb@22000 {
|
|
||||||
compatible = "fsl-usb2-dr";
|
|
||||||
reg = <0x22000 0x1000>;
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <28 0x2>;
|
|
||||||
dr_mode = "host";
|
|
||||||
};
|
|
||||||
|
|
||||||
mdio@24000 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
compatible = "fsl,etsec2-mdio";
|
|
||||||
reg = <0x24000 0x1000 0xb0030 0x4>;
|
|
||||||
};
|
|
||||||
|
|
||||||
mdio@25000 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
compatible = "fsl,etsec2-tbi";
|
|
||||||
reg = <0x25000 0x1000 0xb1030 0x4>;
|
|
||||||
tbi0: tbi-phy@11 {
|
|
||||||
reg = <0x11>;
|
|
||||||
device_type = "tbi-phy";
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
mdio@26000 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
compatible = "fsl,etsec2-tbi";
|
|
||||||
reg = <0x26000 0x1000 0xb1030 0x4>;
|
|
||||||
tbi1: tbi-phy@11 {
|
|
||||||
reg = <0x11>;
|
|
||||||
device_type = "tbi-phy";
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
sdhci@2e000 {
|
|
||||||
compatible = "fsl,esdhc";
|
|
||||||
reg = <0x2e000 0x1000>;
|
|
||||||
interrupts = <72 0x8>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
/* Filled in by U-Boot */
|
|
||||||
clock-frequency = <0>;
|
|
||||||
fsl,sdhci-auto-cmd12;
|
|
||||||
};
|
|
||||||
|
|
||||||
enet0: ethernet@b0000 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
device_type = "network";
|
|
||||||
model = "eTSEC";
|
|
||||||
compatible = "fsl,etsec2";
|
|
||||||
fsl,num_rx_queues = <0x8>;
|
|
||||||
fsl,num_tx_queues = <0x8>;
|
|
||||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
|
|
||||||
queue-group@0 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
reg = <0xb0000 0x1000>;
|
|
||||||
fsl,rx-bit-map = <0xff>;
|
|
||||||
fsl,tx-bit-map = <0xff>;
|
|
||||||
interrupts = <29 2 30 2 34 2>;
|
|
||||||
};
|
|
||||||
|
|
||||||
};
|
|
||||||
|
|
||||||
enet1: ethernet@b1000 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
device_type = "network";
|
|
||||||
model = "eTSEC";
|
|
||||||
compatible = "fsl,etsec2";
|
|
||||||
fsl,num_rx_queues = <0x8>;
|
|
||||||
fsl,num_tx_queues = <0x8>;
|
|
||||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
|
|
||||||
queue-group@0 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
reg = <0xb1000 0x1000>;
|
|
||||||
fsl,rx-bit-map = <0xff>;
|
|
||||||
fsl,tx-bit-map = <0xff>;
|
|
||||||
interrupts = <35 2 36 2 40 2>;
|
|
||||||
};
|
|
||||||
|
|
||||||
};
|
|
||||||
|
|
||||||
enet2: ethernet@b2000 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
device_type = "network";
|
|
||||||
model = "eTSEC";
|
|
||||||
compatible = "fsl,etsec2";
|
|
||||||
fsl,num_rx_queues = <0x8>;
|
|
||||||
fsl,num_tx_queues = <0x8>;
|
|
||||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
|
|
||||||
queue-group@0 {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <1>;
|
|
||||||
reg = <0xb2000 0x1000>;
|
|
||||||
fsl,rx-bit-map = <0xff>;
|
|
||||||
fsl,tx-bit-map = <0xff>;
|
|
||||||
interrupts = <31 2 32 2 33 2>;
|
|
||||||
};
|
|
||||||
|
|
||||||
};
|
|
||||||
|
|
||||||
mpic: pic@40000 {
|
|
||||||
interrupt-controller;
|
|
||||||
#address-cells = <0>;
|
|
||||||
#interrupt-cells = <2>;
|
|
||||||
reg = <0x40000 0x40000>;
|
|
||||||
compatible = "chrp,open-pic";
|
|
||||||
device_type = "open-pic";
|
|
||||||
};
|
|
||||||
|
|
||||||
msi@41600 {
|
|
||||||
compatible = "fsl,p1010-msi", "fsl,mpic-msi";
|
|
||||||
reg = <0x41600 0x80>;
|
|
||||||
msi-available-ranges = <0 0x100>;
|
|
||||||
interrupts = <
|
|
||||||
0xe0 0
|
|
||||||
0xe1 0
|
|
||||||
0xe2 0
|
|
||||||
0xe3 0
|
|
||||||
0xe4 0
|
|
||||||
0xe5 0
|
|
||||||
0xe6 0
|
|
||||||
0xe7 0>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
};
|
|
||||||
|
|
||||||
global-utilities@e0000 { //global utilities block
|
|
||||||
compatible = "fsl,p1010-guts";
|
|
||||||
reg = <0xe0000 0x1000>;
|
|
||||||
fsl,has-rstcr;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
pci0: pcie@ffe09000 {
|
|
||||||
compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
|
|
||||||
device_type = "pci";
|
|
||||||
#size-cells = <2>;
|
|
||||||
#address-cells = <3>;
|
|
||||||
reg = <0 0xffe09000 0 0x1000>;
|
|
||||||
bus-range = <0 255>;
|
|
||||||
clock-frequency = <33333333>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <16 2>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pci1: pcie@ffe0a000 {
|
|
||||||
compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
|
|
||||||
device_type = "pci";
|
|
||||||
#size-cells = <2>;
|
|
||||||
#address-cells = <3>;
|
|
||||||
reg = <0 0xffe0a000 0 0x1000>;
|
|
||||||
bus-range = <0 255>;
|
|
||||||
clock-frequency = <33333333>;
|
|
||||||
interrupt-parent = <&mpic>;
|
|
||||||
interrupts = <16 2>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
Reference in New Issue
Block a user