lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

omap2: add USB initialization for tusb6010

Browse Source 
Based on Kalle's and Tony's patches. Some variables re-organized
and unused code removed.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org>
[tony@atomide.com: this is needed to fix the related tusb6010 DMA API changes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Francisco Alecrim
2010-03-10 18:52:24 -08:00
committed by Tony Lindgren
parent d660f9a26e
commit 97b9ad1633
2 changed files with 99 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

98
arch/arm/mach-omap2/board-n8x0.c
View File

@@ -37,6 +37,103 @@ static int slot1_cover_open;
static int slot2_cover_open; static int slot2_cover_open;
static struct device *mmc_device; static struct device *mmc_device;
#define TUSB6010_ASYNC_CS 1
#define TUSB6010_SYNC_CS 4
#define TUSB6010_GPIO_INT 58
#define TUSB6010_GPIO_ENABLE 0
#define TUSB6010_DMACHAN 0x3f
#if defined(CONFIG_USB_TUSB6010) || \
defined(CONFIG_USB_TUSB6010_MODULE)
/*
* Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
* 1.5 V voltage regulators of PM companion chip. Companion chip will then
* provide then PGOOD signal to TUSB6010 which will release it from reset.
*/
static int tusb_set_power(int state)
{
int i, retval = 0;
if (state) {
gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
msleep(1);
/* Wait until TUSB6010 pulls INT pin down */
i = 100;
while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
msleep(1);
i--;
}
if (!i) {
printk(KERN_ERR "tusb: powerup failed\n");
retval = -ENODEV;
}
} else {
gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
msleep(10);
}
return retval;
}
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
.dyn_fifo = 1,
.num_eps = 16,
.ram_bits = 12,
};
static struct musb_hdrc_platform_data tusb_data = {
#if defined(CONFIG_USB_MUSB_OTG)
.mode = MUSB_OTG,
#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
.mode = MUSB_PERIPHERAL,
#else /* defined(CONFIG_USB_MUSB_HOST) */
.mode = MUSB_HOST,
#endif
.set_power = tusb_set_power,
.min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
.power = 100, /* Max 100 mA VBUS for host mode */
.config = &musb_config,
};
static void __init n8x0_usb_init(void)
{
int ret = 0;
static char announce[] __initdata = KERN_INFO "TUSB 6010\n";
/* PM companion chip power control pin */
ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable");
if (ret != 0) {
printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
TUSB6010_GPIO_ENABLE);
return;
}
gpio_direction_output(TUSB6010_GPIO_ENABLE, 0);
tusb_set_power(0);
ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
if (ret != 0)
goto err;
printk(announce);
return;
err:
gpio_free(TUSB6010_GPIO_ENABLE);
}
#else
static void __init n8x0_usb_init(void) {}
#endif /*CONFIG_USB_TUSB6010 */
static struct omap2_mcspi_device_config p54spi_mcspi_config = { static struct omap2_mcspi_device_config p54spi_mcspi_config = {
.turbo_mode = 0, .turbo_mode = 0,
.single_channel = 1, .single_channel = 1,
@@ -562,6 +659,7 @@ static void __init n8x0_init_machine(void)
n8x0_menelaus_init(); n8x0_menelaus_init();
n8x0_onenand_init(); n8x0_onenand_init();
n8x0_mmc_init(); n8x0_mmc_init();
n8x0_usb_init();
} }
MACHINE_START(NOKIA_N800, "Nokia N800") MACHINE_START(NOKIA_N800, "Nokia N800")

1
arch/arm/mach-omap2/clock2420_data.c
View File

@@ -1841,6 +1841,7 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "aes_ick", &aes_ick, CK_242X), CLK(NULL, "aes_ick", &aes_ick, CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X),
CLK("musb_hdrc", "fck", &osc_ck, CK_242X),
}; };
/* /*