x86: merge 64 and 32 SMP percpu handling

Now that pda is allocated as part of percpu, percpu doesn't need to be
accessed through pda.  Unify x86_64 SMP percpu access with x86_32 SMP
one.  Other than the segment register, operand size and the base of
percpu symbols, they behave identical now.

This patch replaces now unnecessary pda->data_offset with a dummy
field which is necessary to keep stack_canary at its place.  This
patch also moves per_cpu_offset initialization out of init_gdt() into
setup_per_cpu_areas().  Note that this change also necessitates
explicit per_cpu_offset initializations in voyager_smp.c.

With this change, x86_OP_percpu()'s are as efficient on x86_64 as on
x86_32 and also x86_64 can use assembly PER_CPU macros.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Tejun Heo 2009-01-13 20:41:35 +09:00 committed by Ingo Molnar
parent 1a51e3a0ae
commit 9939ddaff5
8 changed files with 55 additions and 105 deletions

View File

@ -11,8 +11,7 @@
/* Per processor datastructure. %gs points to it while the kernel runs */
struct x8664_pda {
struct task_struct *pcurrent; /* 0 Current process */
unsigned long data_offset; /* 8 Per cpu data offset from linker
address */
unsigned long dummy;
unsigned long kernelstack; /* 16 top of kernel stack for current */
unsigned long oldrsp; /* 24 user rsp for system call */
int irqcount; /* 32 Irq nesting counter. Starts -1 */

View File

@ -1,62 +1,13 @@
#ifndef _ASM_X86_PERCPU_H
#define _ASM_X86_PERCPU_H
#ifndef __ASSEMBLY__
#ifdef CONFIG_X86_64
extern void load_pda_offset(int cpu);
#define __percpu_seg gs
#define __percpu_mov_op movq
#else
static inline void load_pda_offset(int cpu) { }
#define __percpu_seg fs
#define __percpu_mov_op movl
#endif
#endif
#ifdef CONFIG_X86_64
#include <linux/compiler.h>
/* Same as asm-generic/percpu.h, except that we store the per cpu offset
in the PDA. Longer term the PDA and every per cpu variable
should be just put into a single section and referenced directly
from %gs */
#ifdef CONFIG_SMP
#include <asm/pda.h>
#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
#define __my_cpu_offset read_pda(data_offset)
#define per_cpu_offset(x) (__per_cpu_offset(x))
#endif
#include <asm-generic/percpu.h>
DECLARE_PER_CPU(struct x8664_pda, pda);
/*
* These are supposed to be implemented as a single instruction which
* operates on the per-cpu data base segment. x86-64 doesn't have
* that yet, so this is a fairly inefficient workaround for the
* meantime. The single instruction is atomic with respect to
* preemption and interrupts, so we need to explicitly disable
* interrupts here to achieve the same effect. However, because it
* can be used from within interrupt-disable/enable, we can't actually
* disable interrupts; disabling preemption is enough.
*/
#define x86_read_percpu(var) \
({ \
typeof(per_cpu_var(var)) __tmp; \
preempt_disable(); \
__tmp = __get_cpu_var(var); \
preempt_enable(); \
__tmp; \
})
#define x86_write_percpu(var, val) \
do { \
preempt_disable(); \
__get_cpu_var(var) = (val); \
preempt_enable(); \
} while(0)
#else /* CONFIG_X86_64 */
#ifdef __ASSEMBLY__
@ -73,42 +24,26 @@ DECLARE_PER_CPU(struct x8664_pda, pda);
* PER_CPU(cpu_gdt_descr, %ebx)
*/
#ifdef CONFIG_SMP
#define PER_CPU(var, reg) \
movl %fs:per_cpu__##this_cpu_off, reg; \
#define PER_CPU(var, reg) \
__percpu_mov_op %__percpu_seg:per_cpu__this_cpu_off, reg; \
lea per_cpu__##var(reg), reg
#define PER_CPU_VAR(var) %fs:per_cpu__##var
#define PER_CPU_VAR(var) %__percpu_seg:per_cpu__##var
#else /* ! SMP */
#define PER_CPU(var, reg) \
movl $per_cpu__##var, reg
#define PER_CPU(var, reg) \
__percpu_mov_op $per_cpu__##var, reg
#define PER_CPU_VAR(var) per_cpu__##var
#endif /* SMP */
#else /* ...!ASSEMBLY */
/*
* PER_CPU finds an address of a per-cpu variable.
*
* Args:
* var - variable name
* cpu - 32bit register containing the current CPU number
*
* The resulting address is stored in the "cpu" argument.
*
* Example:
* PER_CPU(cpu_gdt_descr, %ebx)
*/
#include <linux/stringify.h>
#ifdef CONFIG_SMP
#define __my_cpu_offset x86_read_percpu(this_cpu_off)
/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
#define __percpu_seg "%%fs:"
#else /* !SMP */
#define __percpu_seg ""
#endif /* SMP */
#define __percpu_seg_str "%%"__stringify(__percpu_seg)":"
#define __my_cpu_offset x86_read_percpu(this_cpu_off)
#else
#define __percpu_seg_str
#endif
#include <asm-generic/percpu.h>
@ -128,20 +63,25 @@ do { \
} \
switch (sizeof(var)) { \
case 1: \
asm(op "b %1,"__percpu_seg"%0" \
asm(op "b %1,"__percpu_seg_str"%0" \
: "+m" (var) \
: "ri" ((T__)val)); \
break; \
case 2: \
asm(op "w %1,"__percpu_seg"%0" \
asm(op "w %1,"__percpu_seg_str"%0" \
: "+m" (var) \
: "ri" ((T__)val)); \
break; \
case 4: \
asm(op "l %1,"__percpu_seg"%0" \
asm(op "l %1,"__percpu_seg_str"%0" \
: "+m" (var) \
: "ri" ((T__)val)); \
break; \
case 8: \
asm(op "q %1,"__percpu_seg_str"%0" \
: "+m" (var) \
: "r" ((T__)val)); \
break; \
default: __bad_percpu_size(); \
} \
} while (0)
@ -151,17 +91,22 @@ do { \
typeof(var) ret__; \
switch (sizeof(var)) { \
case 1: \
asm(op "b "__percpu_seg"%1,%0" \
asm(op "b "__percpu_seg_str"%1,%0" \
: "=r" (ret__) \
: "m" (var)); \
break; \
case 2: \
asm(op "w "__percpu_seg"%1,%0" \
asm(op "w "__percpu_seg_str"%1,%0" \
: "=r" (ret__) \
: "m" (var)); \
break; \
case 4: \
asm(op "l "__percpu_seg"%1,%0" \
asm(op "l "__percpu_seg_str"%1,%0" \
: "=r" (ret__) \
: "m" (var)); \
break; \
case 8: \
asm(op "q "__percpu_seg_str"%1,%0" \
: "=r" (ret__) \
: "m" (var)); \
break; \
@ -175,8 +120,14 @@ do { \
#define x86_add_percpu(var, val) percpu_to_op("add", per_cpu__##var, val)
#define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val)
#define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val)
#ifdef CONFIG_X86_64
extern void load_pda_offset(int cpu);
#else
static inline void load_pda_offset(int cpu) { }
#endif
#endif /* !__ASSEMBLY__ */
#endif /* !CONFIG_X86_64 */
#ifdef CONFIG_SMP

View File

@ -55,7 +55,6 @@ int main(void)
ENTRY(irqcount);
ENTRY(cpunumber);
ENTRY(irqstackptr);
ENTRY(data_offset);
DEFINE(pda_size, sizeof(struct x8664_pda));
BLANK();
#undef ENTRY

View File

@ -52,6 +52,7 @@
#include <asm/irqflags.h>
#include <asm/paravirt.h>
#include <asm/ftrace.h>
#include <asm/percpu.h>
/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
#include <linux/elf-em.h>
@ -1072,10 +1073,10 @@ ENTRY(\sym)
TRACE_IRQS_OFF
movq %rsp,%rdi /* pt_regs pointer */
xorl %esi,%esi /* no error code */
movq %gs:pda_data_offset, %rbp
subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
PER_CPU(init_tss, %rbp)
subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp)
call \do_sym
addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp)
jmp paranoid_exit /* %ebx: no swapgs flag */
CFI_ENDPROC
END(\sym)

View File

@ -38,8 +38,6 @@ void __init x86_64_init_pda(void)
#else
cpu_pda(0) = &_boot_cpu_pda;
#endif
cpu_pda(0)->data_offset =
(unsigned long)(__per_cpu_load - __per_cpu_start);
pda_init(0);
}

View File

@ -125,14 +125,14 @@ static void __init setup_per_cpu_maps(void)
#endif
}
#ifdef CONFIG_X86_32
/*
* Great future not-so-futuristic plan: make i386 and x86_64 do it
* the same way
*/
#ifdef CONFIG_X86_64
unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
[0] = (unsigned long)__per_cpu_load,
};
#else
unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(__per_cpu_offset);
#endif
EXPORT_SYMBOL(__per_cpu_offset);
/*
* Great future plan:
@ -178,6 +178,7 @@ void __init setup_per_cpu_areas(void)
#endif
memcpy(ptr, __per_cpu_load, __per_cpu_end - __per_cpu_start);
per_cpu_offset(cpu) = ptr - __per_cpu_start;
#ifdef CONFIG_X86_64
cpu_pda(cpu) = (void *)ptr;
@ -190,7 +191,7 @@ void __init setup_per_cpu_areas(void)
else
memset(cpu_pda(cpu), 0, sizeof(*cpu_pda(cpu)));
#endif
per_cpu_offset(cpu) = ptr - __per_cpu_start;
per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
}

View File

@ -4,10 +4,10 @@
#include <linux/module.h>
#include <asm/smp.h>
#ifdef CONFIG_X86_32
DEFINE_PER_CPU(unsigned long, this_cpu_off);
EXPORT_PER_CPU_SYMBOL(this_cpu_off);
#ifdef CONFIG_X86_32
/*
* Initialize the CPU's GDT. This is either the boot CPU doing itself
* (still using the master per-cpu area), or a CPU doing it for a
@ -24,7 +24,6 @@ __cpuinit void init_gdt(int cpu)
write_gdt_entry(get_cpu_gdt_table(cpu),
GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
per_cpu(cpu_number, cpu) = cpu;
}
#endif

View File

@ -531,6 +531,7 @@ static void __init do_boot_cpu(__u8 cpu)
stack_start.sp = (void *)idle->thread.sp;
init_gdt(cpu);
per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
per_cpu(current_task, cpu) = idle;
early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
irq_ctx_init(cpu);
@ -1748,6 +1749,7 @@ static void __init voyager_smp_prepare_cpus(unsigned int max_cpus)
static void __cpuinit voyager_smp_prepare_boot_cpu(void)
{
init_gdt(smp_processor_id());
per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
switch_to_new_gdt();
cpu_set(smp_processor_id(), cpu_online_map);