powerpc, dma: move bestcomm driver from arch/powerpc/sysdev to drivers/dma

The bestcomm dma hardware, and some of its users like the FEC ethernet
component, is used in different FreeScale parts, including non-powerpc
parts like the ColdFire MCF547x & MCF548x families.  Don't keep the
driver hidden in arch/powerpc where it is inaccessible for other arches.
.c files are moved to drivers/dma/bestcomm, while .h files are moved to
include/linux/fsl/bestcomm.  Makefiles, Kconfigs and #include directives
are updated for the new file locations.

Tested by recompiling for MPC5200 with all bestcomm users enabled.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c

@@ -20,9 +20,9 @@
 #include <asm/mpc52xx.h>
 #include <asm/time.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
-#include <sysdev/bestcomm/gen_bd.h>
+#include <linux/fsl/bestcomm/gen_bd.h>
 
 MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
 MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver");

arch/powerpc/platforms/Kconfig

@@ -352,8 +352,6 @@ config OF_RTC
 	  Uses information from the OF or flattened device tree to instantiate
 	  platform devices for direct mapped RTC chips like the DS1742 or DS1743.
 
-source "arch/powerpc/sysdev/bestcomm/Kconfig"
-
 config SIMPLE_GPIO
 	bool "Support for simple, memory-mapped GPIO controllers"
 	depends on PPC

arch/powerpc/sysdev/Makefile

@@ -26,7 +26,6 @@ obj-$(CONFIG_SIMPLE_GPIO)	+= simple_gpio.o
 obj-$(CONFIG_FSL_RIO)		+= fsl_rio.o fsl_rmu.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
-obj-$(CONFIG_PPC_BESTCOMM)	+= bestcomm/
 mv64x60-$(CONFIG_PCI)		+= mv64x60_pci.o
 obj-$(CONFIG_MV64X60)		+= $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
 				   mv64x60_udbg.o

drivers/Makefile

@@ -29,7 +29,7 @@ obj-$(CONFIG_PNP)		+= pnp/
 obj-y				+= amba/
 # Many drivers will want to use DMA so this has to be made available
 # really early.
-obj-$(CONFIG_DMA_ENGINE)	+= dma/
+obj-$(CONFIG_DMADEVICES)	+= dma/
 
 obj-$(CONFIG_VIRTIO)		+= virtio/
 obj-$(CONFIG_XEN)		+= xen/

drivers/ata/pata_mpc52xx.c

@@ -26,9 +26,9 @@
 #include <asm/prom.h>
 #include <asm/mpc52xx.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
-#include <sysdev/bestcomm/ata.h>
+#include <linux/fsl/bestcomm/ata.h>
 
 #define DRV_NAME	"mpc52xx_ata"
 

drivers/dma/Kconfig

@@ -125,6 +125,8 @@ config MPC512X_DMA
 	---help---
 	  Enable support for the Freescale MPC512x built-in DMA engine.
 
+source "drivers/dma/bestcomm/Kconfig"
+
 config MV_XOR
 	bool "Marvell XOR engine support"
 	depends on PLAT_ORION

drivers/dma/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioat/
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
+obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
 obj-$(CONFIG_AT_HDMAC) += at_hdmac.o

drivers/dma/bestcomm/ata.c

@@ -18,9 +18,9 @@
 #include <linux/types.h>
 #include <asm/io.h>
 
-#include "bestcomm.h"
+#include <linux/fsl/bestcomm/bestcomm.h>
-#include "bestcomm_priv.h"
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
-#include "ata.h"
+#include <linux/fsl/bestcomm/ata.h>
 
 
 /* ======================================================================== */

drivers/dma/bestcomm/bestcomm.c

@@ -23,9 +23,9 @@
 #include <asm/irq.h>
 #include <asm/mpc52xx.h>
 
-#include "sram.h"
+#include <linux/fsl/bestcomm/sram.h>
-#include "bestcomm_priv.h"
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
-#include "bestcomm.h"
+#include "linux/fsl/bestcomm/bestcomm.h"
 
 #define DRIVER_NAME "bestcomm-core"
 

drivers/dma/bestcomm/fec.c

@@ -16,9 +16,9 @@
 #include <linux/types.h>
 #include <asm/io.h>
 
-#include "bestcomm.h"
+#include <linux/fsl/bestcomm/bestcomm.h>
-#include "bestcomm_priv.h"
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
-#include "fec.h"
+#include <linux/fsl/bestcomm/fec.h>
 
 
 /* ======================================================================== */

drivers/dma/bestcomm/gen_bd.c

@@ -21,9 +21,9 @@
 #include <asm/mpc52xx.h>
 #include <asm/mpc52xx_psc.h>
 
-#include "bestcomm.h"
+#include <linux/fsl/bestcomm/bestcomm.h>
-#include "bestcomm_priv.h"
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
-#include "gen_bd.h"
+#include <linux/fsl/bestcomm/gen_bd.h>
 
 
 /* ======================================================================== */

drivers/dma/bestcomm/sram.c

@@ -23,7 +23,7 @@
 #include <asm/io.h>
 #include <asm/mmu.h>
 
-#include "sram.h"
+#include <linux/fsl/bestcomm/sram.h>
 
 
 /* Struct keeping our 'state' */

drivers/net/ethernet/freescale/fec_mpc52xx.c

@@ -40,8 +40,8 @@
 #include <asm/delay.h>
 #include <asm/mpc52xx.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/fec.h>
+#include <linux/fsl/bestcomm/fec.h>
 
 #include "fec_mpc52xx.h"
 

sound/soc/fsl/mpc5200_dma.c

@@ -14,8 +14,8 @@
 
 #include <sound/soc.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/gen_bd.h>
+#include <linux/fsl/bestcomm/gen_bd.h>
 #include <asm/mpc52xx_psc.h>
 
 #include "mpc5200_dma.h"