Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] pxa: ensure mfp is in correct range in mfp_{read,write}
  [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values
  ARM: 5787/1: U300 COH 901 331 fixes
  ARM: Fix warning in sa1100-flash.c
  [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus
  [ARM] pxa: fix incorrect mfp_to_gpio() conversion
  [ARM] pxa/colibri: fix AC97 ifdefs and add missing include
  [ARM] pxa: fix missing underscores in mfp-pxa910.h
  [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y

arch/arm/mach-kirkwood/common.c

@@ -915,6 +915,14 @@ void __init kirkwood_init(void)
 	kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
 	kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
 
+	/*
+	 * Disable propagation of mbus errors to the CPU local bus,
+	 * as this causes mbus errors (which can occur for example
+	 * for PCI aborts) to throw CPU aborts, which we're not set
+	 * up to deal with.
+	 */
+	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+
 	kirkwood_setup_cpu_mbus();
 
 #ifdef CONFIG_CACHE_FEROCEON_L2

arch/arm/mach-kirkwood/include/mach/bridge-regs.h

@@ -13,6 +13,9 @@
 
 #include <mach/kirkwood.h>
 
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG_ERROR_PROP	0x00000004
+
 #define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
 #define CPU_RESET		0x00000002
 

arch/arm/mach-mmp/include/mach/mfp-pxa910.h

@@ -160,7 +160,7 @@
 #define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
 
 /* PWM */
-#define GPIO27 PWM3 AF2		MFP_CFG(GPIO27, AF2)
+#define GPIO27_PWM3_AF2		MFP_CFG(GPIO27, AF2)
 #define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
 #define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
 #define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)

arch/arm/mach-pxa/colibri-pxa320.c

@@ -27,6 +27,7 @@
 #include <mach/colibri.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -145,7 +146,8 @@ static void __init colibri_pxa320_init_lcd(void)
 static inline void colibri_pxa320_init_lcd(void) {}
 #endif
 
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if	defined(CONFIG_SND_AC97_CODEC) || \
+	defined(CONFIG_SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
 	GPIO34_AC97_SYSCLK,
 	GPIO35_AC97_SDATA_IN_0,

arch/arm/mach-pxa/hx4700.c

@@ -604,7 +604,7 @@ static struct platform_device gpio_vbus = {
 static const struct ads7846_platform_data tsc2046_info = {
 	.model            = 7846,
 	.vref_delay_usecs = 100,
-	.pressure_max     = 512,
+	.pressure_max     = 1024,
 	.debounce_max     = 10,
 	.debounce_tol     = 3,
 	.debounce_rep     = 1,

arch/arm/mach-pxa/include/mach/entry-macro.S

@@ -46,5 +46,6 @@
 		beq	1001f
 		bic	\irqstat, \irqstat, #0x80000000
 		mov	\irqnr, \irqstat, lsr #16
+		add	\irqnr, \irqnr, #(PXA_IRQ(0))
 1001:
 		.endm

arch/arm/mach-u300/core.c

@@ -408,7 +408,7 @@ static struct platform_device keypad_device = {
 };
 
 static struct platform_device rtc_device = {
-	.name = "rtc0",
+	.name = "rtc-coh901331",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(rtc_resources),
 	.resource = rtc_resources,

arch/arm/plat-pxa/include/plat/mfp.h

@@ -16,7 +16,7 @@
 #ifndef __ASM_PLAT_MFP_H
 #define __ASM_PLAT_MFP_H
 
-#define mfp_to_gpio(m)	((m) % 128)
+#define mfp_to_gpio(m)	((m) % 256)
 
 /* list of all the configurable MFP pins */
 enum {

arch/arm/plat-pxa/mfp.c

@@ -207,7 +207,7 @@ unsigned long mfp_read(int mfp)
 {
 	unsigned long val, flags;
 
-	BUG_ON(mfp >= MFP_PIN_MAX);
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
 
 	spin_lock_irqsave(&mfp_spin_lock, flags);
 	val = mfpr_readl(mfp_table[mfp].mfpr_off);
@@ -220,7 +220,7 @@ void mfp_write(int mfp, unsigned long val)
 {
 	unsigned long flags;
 
-	BUG_ON(mfp >= MFP_PIN_MAX);
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
 
 	spin_lock_irqsave(&mfp_spin_lock, flags);
 	mfpr_writel(mfp_table[mfp].mfpr_off, val);

drivers/mtd/maps/sa1100-flash.c

@@ -209,8 +209,8 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r
 	}
 	subdev->mtd->owner = THIS_MODULE;
 
-	printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %dMiB, "
+	printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %uMiB, %d-bit\n",
-		"%d-bit\n", phys, subdev->mtd->size >> 20,
+		phys, (unsigned)(subdev->mtd->size >> 20),
 		subdev->map.bankwidth * 8);
 
 	return 0;

drivers/rtc/rtc-coh901331.c

@@ -58,7 +58,16 @@ static irqreturn_t coh901331_interrupt(int irq, void *data)
 	clk_enable(rtap->clk);
 	/* Ack IRQ */
 	writel(1, rtap->virtbase + COH901331_IRQ_EVENT);
+	/*
+	 * Disable the interrupt. This is necessary because
+	 * the RTC lives on a lower-clocked line and will
+	 * not release the IRQ line until after a few (slower)
+	 * clock cycles. The interrupt will be re-enabled when
+	 * a new alarm is set anyway.
+	 */
+	writel(0, rtap->virtbase + COH901331_IRQ_MASK);
 	clk_disable(rtap->clk);
+
 	/* Set alarm flag */
 	rtc_update_irq(rtap->rtc, 1, RTC_AF);
 
@@ -128,6 +137,8 @@ static int coh901331_alarm_irq_enable(struct device *dev, unsigned int enabled)
 	else
 		writel(0, rtap->virtbase + COH901331_IRQ_MASK);
 	clk_disable(rtap->clk);
+
+	return 0;
 }
 
 static struct rtc_class_ops coh901331_ops = {