drm/panel: Changes for v4.1-rc1

This set of changes adds support for a whole bunch of new panels, mostly
 simple ones. There's now also support for panels to provide display
 timings rather than fixed modes, which should allow panels to work with
 a larger number of display drivers. Eventually drivers should migrate to
 this new interface and the fixed modes removed from panels.
 
 There are also a couple of sparse fixes for the PS8622 and PS8625 bridge
 drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVHXdzAAoJEN0jrNd/PrOhWKgQAJGdicIa3B8CLohgAfyMI+in
 1PxO2vBGgz7T02iFTOzwh5cvh8E7mog9/R5jVCyan22BHdws75FgL6RVMcqbllds
 c2ejPHhHlBEzOBtbZeEmvg1twmqKY5ejk1X7rtVHNCNaXVzSlpxYJF2jfK8DmhRF
 l7UmjKIpyeDSL+33t+Q0jZynU2mwLfstr/4lwMPPKU6kzz15lIo0gPAnOlagbGD3
 L5GOm1+LaDXpxojDtIElzzhzDf1DhmD4nIA3KRGAmKHRxA1u/vZUsW5UNaCvJB0v
 eMVFdIk/aFfw4jizlAEute4sMKcXWNBMHmEr7e8Bakr+clie7BcXN9zeZ+B99t7A
 +pkRbWNN8Isr4FpGNVz0XdU2BzmJAaQ59ghmZ5ZJtOmZwMWJbJsG7vMw0p2+68w6
 bxhrEoT7hQDUicoKhcM6/8jDCqLZdqN0co16NHIL+0/BiUuS9Q1qr3Y7dBFbiU6D
 iNKKeniODw8lA+Jv7wxVGbS2f5RvFeLvhgi4MgF78bEj8Mxf2EpB+mJT6WtEcX37
 OMcg7xN7C6q2cu4Cpj7txF3gnKwB56lkJsX7xnyajtdHLDcw8Vx4CZprZCyA5gWP
 FWpDLkT7l3Fi3jRDoVBw3WRa+rIfSFvLuVf3iLyVuFE5vR0tqJKutYDeaez0cMQM
 nQqS1f2MYsKmNJf2DFhx
 =0aBn
 -----END PGP SIGNATURE-----

Merge tag 'drm/panel/for-4.1-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/panel: Changes for v4.1-rc1

This set of changes adds support for a whole bunch of new panels, mostly
simple ones. There's now also support for panels to provide display
timings rather than fixed modes, which should allow panels to work with
a larger number of display drivers. Eventually drivers should migrate to
this new interface and the fixed modes removed from panels.

There are also a couple of sparse fixes for the PS8622 and PS8625 bridge
drivers.

* tag 'drm/panel/for-4.1-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: Add support for Ampire AM-800480R3TMQW-A1H 800x480 7" panel
  of: Add vendor prefix for Ampire Co., Ltd.
  drm/panel: Add display timing for HannStar HSD070PWW1
  drm/panel: simple: Add display timing support
  drm/panel: Add display timing support
  drm/panel: Add support for OrtusTech COM43H4M85ULC panel
  of: Add vendor prefix for Ortus Technology Co., Ltd.
  drm/panel: Add bus format for Giantplus GPG482739QS5 panel
  drm/panel: simple: Add support for AUO b101ean01 panel
  drm/panel: simple: Add support for Innolux ZJ070NA-01P
  drm/panel: simple: Add support for Innolux AT043TN24
  drm/panel: simple: Add support for Shelly SCA07010-BFN-LNN
  drm/panel: simple: Add support for Samsung LTN140AT29 panel
  drm: Remove unused DRM_MODE_OBJECT_BRIDGE
  drm/bridge: ptn3460: Fix sparse warnings
  drm/bridge: ps8622: Fix sparse warnings
  drm/bridge: Add I2C based driver for ps8622/ps8625 bridge
This commit is contained in:
Dave Airlie 2015-04-08 11:14:10 +10:00
commit a08aad54be
16 changed files with 997 additions and 15 deletions

View File

@ -0,0 +1,7 @@
Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
Required properties:
- compatible: should be "ampire,am800480r3tmqwa1h"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

View File

@ -0,0 +1,7 @@
AU Optronics Corporation 10.1" WSVGA TFT LCD panel
Required properties:
- compatible: should be "auo,b101ean01"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

View File

@ -0,0 +1,7 @@
Innolux AT043TN24 4.3" WQVGA TFT LCD panel
Required properties:
- compatible: should be "innolux,at043tn24"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

View File

@ -0,0 +1,7 @@
Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
Required properties:
- compatible: should be "innolux,zj070na-01p"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

View File

@ -0,0 +1,7 @@
OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel
Required properties:
- compatible: should be "ortustech,com43h4m85ulc"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

View File

@ -0,0 +1,7 @@
Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
Required properties:
- compatible: should be "samsung,ltn140at29-301"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

View File

@ -0,0 +1,7 @@
Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
Required properties:
- compatible: should be "shelly,sca07010-bfn-lnn"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

View File

@ -17,6 +17,7 @@ altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amd Advanced Micro Devices (AMD), Inc.
amlogic Amlogic, Inc.
ampire Ampire Co., Ltd.
ams AMS AG
amstaos AMS-Taos Inc.
apm Applied Micro Circuits Corporation (APM)
@ -132,6 +133,7 @@ nvidia NVIDIA
nxp NXP Semiconductors
onnn ON Semiconductor Corp.
opencores OpenCores.org
ortustech Ortus Technology Co., Ltd.
ovti OmniVision Technologies
panasonic Panasonic Corporation
parade Parade Technologies Inc.

View File

@ -11,3 +11,14 @@ config DRM_PTN3460
select DRM_PANEL
---help---
ptn3460 eDP-LVDS bridge chip driver.
config DRM_PS8622
tristate "Parade eDP/LVDS bridge"
depends on DRM
depends on OF
select DRM_PANEL
select DRM_KMS_HELPER
select BACKLIGHT_LCD_SUPPORT
select BACKLIGHT_CLASS_DEVICE
---help---
parade eDP-LVDS bridge chip driver.

View File

@ -1,4 +1,5 @@
ccflags-y := -Iinclude/drm
obj-$(CONFIG_DRM_PS8622) += ps8622.o
obj-$(CONFIG_DRM_PTN3460) += ptn3460.o
obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o

View File

@ -0,0 +1,684 @@
/*
* Parade PS8622 eDP/LVDS bridge driver
*
* Copyright (C) 2014 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/pm.h>
#include <linux/regulator/consumer.h>
#include <drm/drm_panel.h>
#include "drmP.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
/* Brightness scale on the Parade chip */
#define PS8622_MAX_BRIGHTNESS 0xff
/* Timings taken from the version 1.7 datasheet for the PS8622/PS8625 */
#define PS8622_POWER_RISE_T1_MIN_US 10
#define PS8622_POWER_RISE_T1_MAX_US 10000
#define PS8622_RST_HIGH_T2_MIN_US 3000
#define PS8622_RST_HIGH_T2_MAX_US 30000
#define PS8622_PWMO_END_T12_MS 200
#define PS8622_POWER_FALL_T16_MAX_US 10000
#define PS8622_POWER_OFF_T17_MS 500
#if ((PS8622_RST_HIGH_T2_MIN_US + PS8622_POWER_RISE_T1_MAX_US) > \
(PS8622_RST_HIGH_T2_MAX_US + PS8622_POWER_RISE_T1_MIN_US))
#error "T2.min + T1.max must be less than T2.max + T1.min"
#endif
struct ps8622_bridge {
struct drm_connector connector;
struct i2c_client *client;
struct drm_bridge bridge;
struct drm_panel *panel;
struct regulator *v12;
struct backlight_device *bl;
struct gpio_desc *gpio_slp;
struct gpio_desc *gpio_rst;
u32 max_lane_count;
u32 lane_count;
bool enabled;
};
static inline struct ps8622_bridge *
bridge_to_ps8622(struct drm_bridge *bridge)
{
return container_of(bridge, struct ps8622_bridge, bridge);
}
static inline struct ps8622_bridge *
connector_to_ps8622(struct drm_connector *connector)
{
return container_of(connector, struct ps8622_bridge, connector);
}
static int ps8622_set(struct i2c_client *client, u8 page, u8 reg, u8 val)
{
int ret;
struct i2c_adapter *adap = client->adapter;
struct i2c_msg msg;
u8 data[] = {reg, val};
msg.addr = client->addr + page;
msg.flags = 0;
msg.len = sizeof(data);
msg.buf = data;
ret = i2c_transfer(adap, &msg, 1);
if (ret != 1)
pr_warn("PS8622 I2C write (0x%02x,0x%02x,0x%02x) failed: %d\n",
client->addr + page, reg, val, ret);
return !(ret == 1);
}
static int ps8622_send_config(struct ps8622_bridge *ps8622)
{
struct i2c_client *cl = ps8622->client;
int err = 0;
/* HPD low */
err = ps8622_set(cl, 0x02, 0xa1, 0x01);
if (err)
goto error;
/* SW setting: [1:0] SW output 1.2V voltage is lower to 96% */
err = ps8622_set(cl, 0x04, 0x14, 0x01);
if (err)
goto error;
/* RCO SS setting: [5:4] = b01 0.5%, b10 1%, b11 1.5% */
err = ps8622_set(cl, 0x04, 0xe3, 0x20);
if (err)
goto error;
/* [7] RCO SS enable */
err = ps8622_set(cl, 0x04, 0xe2, 0x80);
if (err)
goto error;
/* RPHY Setting
* [3:2] CDR tune wait cycle before measure for fine tune
* b00: 1us b01: 0.5us b10:2us, b11: 4us
*/
err = ps8622_set(cl, 0x04, 0x8a, 0x0c);
if (err)
goto error;
/* [3] RFD always on */
err = ps8622_set(cl, 0x04, 0x89, 0x08);
if (err)
goto error;
/* CTN lock in/out: 20000ppm/80000ppm. Lock out 2 times. */
err = ps8622_set(cl, 0x04, 0x71, 0x2d);
if (err)
goto error;
/* 2.7G CDR settings: NOF=40LSB for HBR CDR setting */
err = ps8622_set(cl, 0x04, 0x7d, 0x07);
if (err)
goto error;
/* [1:0] Fmin=+4bands */
err = ps8622_set(cl, 0x04, 0x7b, 0x00);
if (err)
goto error;
/* [7:5] DCO_FTRNG=+-40% */
err = ps8622_set(cl, 0x04, 0x7a, 0xfd);
if (err)
goto error;
/* 1.62G CDR settings: [5:2]NOF=64LSB [1:0]DCO scale is 2/5 */
err = ps8622_set(cl, 0x04, 0xc0, 0x12);
if (err)
goto error;
/* Gitune=-37% */
err = ps8622_set(cl, 0x04, 0xc1, 0x92);
if (err)
goto error;
/* Fbstep=100% */
err = ps8622_set(cl, 0x04, 0xc2, 0x1c);
if (err)
goto error;
/* [7] LOS signal disable */
err = ps8622_set(cl, 0x04, 0x32, 0x80);
if (err)
goto error;
/* RPIO Setting: [7:4] LVDS driver bias current : 75% (250mV swing) */
err = ps8622_set(cl, 0x04, 0x00, 0xb0);
if (err)
goto error;
/* [7:6] Right-bar GPIO output strength is 8mA */
err = ps8622_set(cl, 0x04, 0x15, 0x40);
if (err)
goto error;
/* EQ Training State Machine Setting, RCO calibration start */
err = ps8622_set(cl, 0x04, 0x54, 0x10);
if (err)
goto error;
/* Logic, needs more than 10 I2C command */
/* [4:0] MAX_LANE_COUNT set to max supported lanes */
err = ps8622_set(cl, 0x01, 0x02, 0x80 | ps8622->max_lane_count);
if (err)
goto error;
/* [4:0] LANE_COUNT_SET set to chosen lane count */
err = ps8622_set(cl, 0x01, 0x21, 0x80 | ps8622->lane_count);
if (err)
goto error;
err = ps8622_set(cl, 0x00, 0x52, 0x20);
if (err)
goto error;
/* HPD CP toggle enable */
err = ps8622_set(cl, 0x00, 0xf1, 0x03);
if (err)
goto error;
err = ps8622_set(cl, 0x00, 0x62, 0x41);
if (err)
goto error;
/* Counter number, add 1ms counter delay */
err = ps8622_set(cl, 0x00, 0xf6, 0x01);
if (err)
goto error;
/* [6]PWM function control by DPCD0040f[7], default is PWM block */
err = ps8622_set(cl, 0x00, 0x77, 0x06);
if (err)
goto error;
/* 04h Adjust VTotal toleranceto fix the 30Hz no display issue */
err = ps8622_set(cl, 0x00, 0x4c, 0x04);
if (err)
goto error;
/* DPCD00400='h00, Parade OUI ='h001cf8 */
err = ps8622_set(cl, 0x01, 0xc0, 0x00);
if (err)
goto error;
/* DPCD00401='h1c */
err = ps8622_set(cl, 0x01, 0xc1, 0x1c);
if (err)
goto error;
/* DPCD00402='hf8 */
err = ps8622_set(cl, 0x01, 0xc2, 0xf8);
if (err)
goto error;
/* DPCD403~408 = ASCII code, D2SLV5='h4432534c5635 */
err = ps8622_set(cl, 0x01, 0xc3, 0x44);
if (err)
goto error;
/* DPCD404 */
err = ps8622_set(cl, 0x01, 0xc4, 0x32);
if (err)
goto error;
/* DPCD405 */
err = ps8622_set(cl, 0x01, 0xc5, 0x53);
if (err)
goto error;
/* DPCD406 */
err = ps8622_set(cl, 0x01, 0xc6, 0x4c);
if (err)
goto error;
/* DPCD407 */
err = ps8622_set(cl, 0x01, 0xc7, 0x56);
if (err)
goto error;
/* DPCD408 */
err = ps8622_set(cl, 0x01, 0xc8, 0x35);
if (err)
goto error;
/* DPCD40A, Initial Code major revision '01' */
err = ps8622_set(cl, 0x01, 0xca, 0x01);
if (err)
goto error;
/* DPCD40B, Initial Code minor revision '05' */
err = ps8622_set(cl, 0x01, 0xcb, 0x05);
if (err)
goto error;
if (ps8622->bl) {
/* DPCD720, internal PWM */
err = ps8622_set(cl, 0x01, 0xa5, 0xa0);
if (err)
goto error;
/* FFh for 100% brightness, 0h for 0% brightness */
err = ps8622_set(cl, 0x01, 0xa7,
ps8622->bl->props.brightness);
if (err)
goto error;
} else {
/* DPCD720, external PWM */
err = ps8622_set(cl, 0x01, 0xa5, 0x80);
if (err)
goto error;
}
/* Set LVDS output as 6bit-VESA mapping, single LVDS channel */
err = ps8622_set(cl, 0x01, 0xcc, 0x13);
if (err)
goto error;
/* Enable SSC set by register */
err = ps8622_set(cl, 0x02, 0xb1, 0x20);
if (err)
goto error;
/* Set SSC enabled and +/-1% central spreading */
err = ps8622_set(cl, 0x04, 0x10, 0x16);
if (err)
goto error;
/* Logic end */
/* MPU Clock source: LC => RCO */
err = ps8622_set(cl, 0x04, 0x59, 0x60);
if (err)
goto error;
/* LC -> RCO */
err = ps8622_set(cl, 0x04, 0x54, 0x14);
if (err)
goto error;
/* HPD high */
err = ps8622_set(cl, 0x02, 0xa1, 0x91);
error:
return err ? -EIO : 0;
}
static int ps8622_backlight_update(struct backlight_device *bl)
{
struct ps8622_bridge *ps8622 = dev_get_drvdata(&bl->dev);
int ret, brightness = bl->props.brightness;
if (bl->props.power != FB_BLANK_UNBLANK ||
bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
brightness = 0;
if (!ps8622->enabled)
return -EINVAL;
ret = ps8622_set(ps8622->client, 0x01, 0xa7, brightness);
return ret;
}
static const struct backlight_ops ps8622_backlight_ops = {
.update_status = ps8622_backlight_update,
};
static void ps8622_pre_enable(struct drm_bridge *bridge)
{
struct ps8622_bridge *ps8622 = bridge_to_ps8622(bridge);
int ret;
if (ps8622->enabled)
return;
gpiod_set_value(ps8622->gpio_rst, 0);
if (ps8622->v12) {
ret = regulator_enable(ps8622->v12);
if (ret)
DRM_ERROR("fails to enable ps8622->v12");
}
if (drm_panel_prepare(ps8622->panel)) {
DRM_ERROR("failed to prepare panel\n");
return;
}
gpiod_set_value(ps8622->gpio_slp, 1);
/*
* T1 is the range of time that it takes for the power to rise after we
* enable the lcd/ps8622 fet. T2 is the range of time in which the
* data sheet specifies we should deassert the reset pin.
*
* If it takes T1.max for the power to rise, we need to wait atleast
* T2.min before deasserting the reset pin. If it takes T1.min for the
* power to rise, we need to wait at most T2.max before deasserting the
* reset pin.
*/
usleep_range(PS8622_RST_HIGH_T2_MIN_US + PS8622_POWER_RISE_T1_MAX_US,
PS8622_RST_HIGH_T2_MAX_US + PS8622_POWER_RISE_T1_MIN_US);
gpiod_set_value(ps8622->gpio_rst, 1);
/* wait 20ms after RST high */
usleep_range(20000, 30000);
ret = ps8622_send_config(ps8622);
if (ret) {
DRM_ERROR("Failed to send config to bridge (%d)\n", ret);
return;
}
ps8622->enabled = true;
}
static void ps8622_enable(struct drm_bridge *bridge)
{
struct ps8622_bridge *ps8622 = bridge_to_ps8622(bridge);
if (drm_panel_enable(ps8622->panel)) {
DRM_ERROR("failed to enable panel\n");
return;
}
}
static void ps8622_disable(struct drm_bridge *bridge)
{
struct ps8622_bridge *ps8622 = bridge_to_ps8622(bridge);
if (drm_panel_disable(ps8622->panel)) {
DRM_ERROR("failed to disable panel\n");
return;
}
msleep(PS8622_PWMO_END_T12_MS);
}
static void ps8622_post_disable(struct drm_bridge *bridge)
{
struct ps8622_bridge *ps8622 = bridge_to_ps8622(bridge);
if (!ps8622->enabled)
return;
ps8622->enabled = false;
/*
* This doesn't matter if the regulators are turned off, but something
* else might keep them on. In that case, we want to assert the slp gpio
* to lower power.
*/
gpiod_set_value(ps8622->gpio_slp, 0);
if (drm_panel_unprepare(ps8622->panel)) {
DRM_ERROR("failed to unprepare panel\n");
return;
}
if (ps8622->v12)
regulator_disable(ps8622->v12);
/*
* Sleep for at least the amount of time that it takes the power rail to
* fall to prevent asserting the rst gpio from doing anything.
*/
usleep_range(PS8622_POWER_FALL_T16_MAX_US,
2 * PS8622_POWER_FALL_T16_MAX_US);
gpiod_set_value(ps8622->gpio_rst, 0);
msleep(PS8622_POWER_OFF_T17_MS);
}
static int ps8622_get_modes(struct drm_connector *connector)
{
struct ps8622_bridge *ps8622;
ps8622 = connector_to_ps8622(connector);
return drm_panel_get_modes(ps8622->panel);
}
static struct drm_encoder *ps8622_best_encoder(struct drm_connector *connector)
{
struct ps8622_bridge *ps8622;
ps8622 = connector_to_ps8622(connector);
return ps8622->bridge.encoder;
}
static const struct drm_connector_helper_funcs ps8622_connector_helper_funcs = {
.get_modes = ps8622_get_modes,
.best_encoder = ps8622_best_encoder,
};
static enum drm_connector_status ps8622_detect(struct drm_connector *connector,
bool force)
{
return connector_status_connected;
}
static void ps8622_connector_destroy(struct drm_connector *connector)
{
drm_connector_cleanup(connector);
}
static const struct drm_connector_funcs ps8622_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.fill_modes = drm_helper_probe_single_connector_modes,
.detect = ps8622_detect,
.destroy = ps8622_connector_destroy,
};
static int ps8622_attach(struct drm_bridge *bridge)
{
struct ps8622_bridge *ps8622 = bridge_to_ps8622(bridge);
int ret;
if (!bridge->encoder) {
DRM_ERROR("Parent encoder object not found");
return -ENODEV;
}
ps8622->connector.polled = DRM_CONNECTOR_POLL_HPD;
ret = drm_connector_init(bridge->dev, &ps8622->connector,
&ps8622_connector_funcs, DRM_MODE_CONNECTOR_LVDS);
if (ret) {
DRM_ERROR("Failed to initialize connector with drm\n");
return ret;
}
drm_connector_helper_add(&ps8622->connector,
&ps8622_connector_helper_funcs);
drm_connector_register(&ps8622->connector);
drm_mode_connector_attach_encoder(&ps8622->connector,
bridge->encoder);
if (ps8622->panel)
drm_panel_attach(ps8622->panel, &ps8622->connector);
drm_helper_hpd_irq_event(ps8622->connector.dev);
return ret;
}
static const struct drm_bridge_funcs ps8622_bridge_funcs = {
.pre_enable = ps8622_pre_enable,
.enable = ps8622_enable,
.disable = ps8622_disable,
.post_disable = ps8622_post_disable,
.attach = ps8622_attach,
};
static const struct of_device_id ps8622_devices[] = {
{.compatible = "parade,ps8622",},
{.compatible = "parade,ps8625",},
{}
};
MODULE_DEVICE_TABLE(of, ps8622_devices);
static int ps8622_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct device_node *endpoint, *panel_node;
struct ps8622_bridge *ps8622;
int ret;
ps8622 = devm_kzalloc(dev, sizeof(*ps8622), GFP_KERNEL);
if (!ps8622)
return -ENOMEM;
endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
if (endpoint) {
panel_node = of_graph_get_remote_port_parent(endpoint);
if (panel_node) {
ps8622->panel = of_drm_find_panel(panel_node);
of_node_put(panel_node);
if (!ps8622->panel)
return -EPROBE_DEFER;
}
}
ps8622->client = client;
ps8622->v12 = devm_regulator_get(dev, "vdd12");
if (IS_ERR(ps8622->v12)) {
dev_info(dev, "no 1.2v regulator found for PS8622\n");
ps8622->v12 = NULL;
}
ps8622->gpio_slp = devm_gpiod_get(dev, "sleep");
if (IS_ERR(ps8622->gpio_slp)) {
ret = PTR_ERR(ps8622->gpio_slp);
dev_err(dev, "cannot get gpio_slp %d\n", ret);
return ret;
}
ret = gpiod_direction_output(ps8622->gpio_slp, 1);
if (ret) {
dev_err(dev, "cannot configure gpio_slp\n");
return ret;
}
ps8622->gpio_rst = devm_gpiod_get(dev, "reset");
if (IS_ERR(ps8622->gpio_rst)) {
ret = PTR_ERR(ps8622->gpio_rst);
dev_err(dev, "cannot get gpio_rst %d\n", ret);
return ret;
}
/*
* Assert the reset pin high to avoid the bridge being
* initialized prematurely
*/
ret = gpiod_direction_output(ps8622->gpio_rst, 1);
if (ret) {
dev_err(dev, "cannot configure gpio_rst\n");
return ret;
}
ps8622->max_lane_count = id->driver_data;
if (of_property_read_u32(dev->of_node, "lane-count",
&ps8622->lane_count)) {
ps8622->lane_count = ps8622->max_lane_count;
} else if (ps8622->lane_count > ps8622->max_lane_count) {
dev_info(dev, "lane-count property is too high,"
"using max_lane_count\n");
ps8622->lane_count = ps8622->max_lane_count;
}
if (!of_find_property(dev->of_node, "use-external-pwm", NULL)) {
ps8622->bl = backlight_device_register("ps8622-backlight",
dev, ps8622, &ps8622_backlight_ops,
NULL);
if (IS_ERR(ps8622->bl)) {
DRM_ERROR("failed to register backlight\n");
ret = PTR_ERR(ps8622->bl);
ps8622->bl = NULL;
return ret;
}
ps8622->bl->props.max_brightness = PS8622_MAX_BRIGHTNESS;
ps8622->bl->props.brightness = PS8622_MAX_BRIGHTNESS;
}
ps8622->bridge.funcs = &ps8622_bridge_funcs;
ps8622->bridge.of_node = dev->of_node;
ret = drm_bridge_add(&ps8622->bridge);
if (ret) {
DRM_ERROR("Failed to add bridge\n");
return ret;
}
i2c_set_clientdata(client, ps8622);
return 0;
}
static int ps8622_remove(struct i2c_client *client)
{
struct ps8622_bridge *ps8622 = i2c_get_clientdata(client);
if (ps8622->bl)
backlight_device_unregister(ps8622->bl);
drm_bridge_remove(&ps8622->bridge);
return 0;
}
static const struct i2c_device_id ps8622_i2c_table[] = {
/* Device type, max_lane_count */
{"ps8622", 1},
{"ps8625", 2},
{},
};
MODULE_DEVICE_TABLE(i2c, ps8622_i2c_table);
static struct i2c_driver ps8622_driver = {
.id_table = ps8622_i2c_table,
.probe = ps8622_probe,
.remove = ps8622_remove,
.driver = {
.name = "ps8622",
.owner = THIS_MODULE,
.of_match_table = ps8622_devices,
},
};
module_i2c_driver(ps8622_driver);
MODULE_AUTHOR("Vincent Palatin <vpalatin@chromium.org>");
MODULE_DESCRIPTION("Parade ps8622/ps8625 eDP-LVDS converter driver");
MODULE_LICENSE("GPL v2");

View File

@ -265,7 +265,7 @@ static struct drm_connector_funcs ptn3460_connector_funcs = {
.destroy = ptn3460_connector_destroy,
};
int ptn3460_bridge_attach(struct drm_bridge *bridge)
static int ptn3460_bridge_attach(struct drm_bridge *bridge)
{
struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
int ret;

View File

@ -11,6 +11,7 @@ config DRM_PANEL_SIMPLE
tristate "support for simple panels"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
DRM panel driver for dumb panels that need at most a regulator and
a GPIO to be powered up. Optionally a backlight can be attached so

View File

@ -33,9 +33,14 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_panel.h>
#include <video/display_timing.h>
#include <video/videomode.h>
struct panel_desc {
const struct drm_display_mode *modes;
unsigned int num_modes;
const struct display_timing *timings;
unsigned int num_timings;
unsigned int bpc;
@ -94,6 +99,25 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel)
if (!panel->desc)
return 0;
for (i = 0; i < panel->desc->num_timings; i++) {
const struct display_timing *dt = &panel->desc->timings[i];
struct videomode vm;
videomode_from_timing(dt, &vm);
mode = drm_mode_create(drm);
if (!mode) {
dev_err(drm->dev, "failed to add mode %ux%u\n",
dt->hactive.typ, dt->vactive.typ);
continue;
}
drm_display_mode_from_videomode(&vm, mode);
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
num++;
}
for (i = 0; i < panel->desc->num_modes; i++) {
const struct drm_display_mode *m = &panel->desc->modes[i];
@ -226,12 +250,30 @@ static int panel_simple_get_modes(struct drm_panel *panel)
return num;
}
static int panel_simple_get_timings(struct drm_panel *panel,
unsigned int num_timings,
struct display_timing *timings)
{
struct panel_simple *p = to_panel_simple(panel);
unsigned int i;
if (p->desc->num_timings < num_timings)
num_timings = p->desc->num_timings;
if (timings)
for (i = 0; i < num_timings; i++)
timings[i] = p->desc->timings[i];
return p->desc->num_timings;
}
static const struct drm_panel_funcs panel_simple_funcs = {
.disable = panel_simple_disable,
.unprepare = panel_simple_unprepare,
.prepare = panel_simple_prepare,
.enable = panel_simple_enable,
.get_modes = panel_simple_get_modes,
.get_timings = panel_simple_get_timings,
};
static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
@ -327,6 +369,31 @@ static void panel_simple_shutdown(struct device *dev)
panel_simple_disable(&panel->base);
}
static const struct drm_display_mode ampire_am800480r3tmqwa1h_mode = {
.clock = 33333,
.hdisplay = 800,
.hsync_start = 800 + 0,
.hsync_end = 800 + 0 + 255,
.htotal = 800 + 0 + 255 + 0,
.vdisplay = 480,
.vsync_start = 480 + 2,
.vsync_end = 480 + 2 + 45,
.vtotal = 480 + 2 + 45 + 0,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
};
static const struct panel_desc ampire_am800480r3tmqwa1h = {
.modes = &ampire_am800480r3tmqwa1h_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 152,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct drm_display_mode auo_b101aw03_mode = {
.clock = 51450,
.hdisplay = 1024,
@ -350,6 +417,29 @@ static const struct panel_desc auo_b101aw03 = {
},
};
static const struct drm_display_mode auo_b101ean01_mode = {
.clock = 72500,
.hdisplay = 1280,
.hsync_start = 1280 + 119,
.hsync_end = 1280 + 119 + 32,
.htotal = 1280 + 119 + 32 + 21,
.vdisplay = 800,
.vsync_start = 800 + 4,
.vsync_end = 800 + 4 + 20,
.vtotal = 800 + 4 + 20 + 8,
.vrefresh = 60,
};
static const struct panel_desc auo_b101ean01 = {
.modes = &auo_b101ean01_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 217,
.height = 136,
},
};
static const struct drm_display_mode auo_b101xtn01_mode = {
.clock = 72000,
.hdisplay = 1366,
@ -615,24 +705,25 @@ static const struct panel_desc giantplus_gpg482739qs5 = {
.width = 95,
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
static const struct drm_display_mode hannstar_hsd070pww1_mode = {
.clock = 71100,
.hdisplay = 1280,
.hsync_start = 1280 + 1,
.hsync_end = 1280 + 1 + 158,
.htotal = 1280 + 1 + 158 + 1,
.vdisplay = 800,
.vsync_start = 800 + 1,
.vsync_end = 800 + 1 + 21,
.vtotal = 800 + 1 + 21 + 1,
.vrefresh = 60,
static const struct display_timing hannstar_hsd070pww1_timing = {
.pixelclock = { 64300000, 71100000, 82000000 },
.hactive = { 1280, 1280, 1280 },
.hfront_porch = { 1, 1, 10 },
.hback_porch = { 1, 1, 10 },
.hsync_len = { 52, 158, 661 },
.vactive = { 800, 800, 800 },
.vfront_porch = { 1, 1, 10 },
.vback_porch = { 1, 1, 10 },
.vsync_len = { 1, 21, 203 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc hannstar_hsd070pww1 = {
.modes = &hannstar_hsd070pww1_mode,
.num_modes = 1,
.timings = &hannstar_hsd070pww1_timing,
.num_timings = 1,
.bpc = 6,
.size = {
.width = 151,
@ -663,6 +754,31 @@ static const struct panel_desc hitachi_tx23d38vm0caa = {
},
};
static const struct drm_display_mode innolux_at043tn24_mode = {
.clock = 9000,
.hdisplay = 480,
.hsync_start = 480 + 2,
.hsync_end = 480 + 2 + 41,
.htotal = 480 + 2 + 41 + 2,
.vdisplay = 272,
.vsync_start = 272 + 2,
.vsync_end = 272 + 2 + 11,
.vtotal = 272 + 2 + 11 + 2,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
static const struct panel_desc innolux_at043tn24 = {
.modes = &innolux_at043tn24_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 95,
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
static const struct drm_display_mode innolux_g121i1_l01_mode = {
.clock = 71000,
.hdisplay = 1280,
@ -733,6 +849,29 @@ static const struct panel_desc innolux_n156bge_l21 = {
},
};
static const struct drm_display_mode innolux_zj070na_01p_mode = {
.clock = 51501,
.hdisplay = 1024,
.hsync_start = 1024 + 128,
.hsync_end = 1024 + 128 + 64,
.htotal = 1024 + 128 + 64 + 128,
.vdisplay = 600,
.vsync_start = 600 + 16,
.vsync_end = 600 + 16 + 4,
.vtotal = 600 + 16 + 4 + 16,
.vrefresh = 60,
};
static const struct panel_desc innolux_zj070na_01p = {
.modes = &innolux_zj070na_01p_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 1024,
.height = 600,
},
};
static const struct drm_display_mode lg_lp129qe_mode = {
.clock = 285250,
.hdisplay = 2560,
@ -756,6 +895,30 @@ static const struct panel_desc lg_lp129qe = {
},
};
static const struct drm_display_mode ortustech_com43h4m85ulc_mode = {
.clock = 25000,
.hdisplay = 480,
.hsync_start = 480 + 10,
.hsync_end = 480 + 10 + 10,
.htotal = 480 + 10 + 10 + 15,
.vdisplay = 800,
.vsync_start = 800 + 3,
.vsync_end = 800 + 3 + 3,
.vtotal = 800 + 3 + 3 + 3,
.vrefresh = 60,
};
static const struct panel_desc ortustech_com43h4m85ulc = {
.modes = &ortustech_com43h4m85ulc_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 56,
.height = 93,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
static const struct drm_display_mode samsung_ltn101nt05_mode = {
.clock = 54030,
.hdisplay = 1024,
@ -779,10 +942,62 @@ static const struct panel_desc samsung_ltn101nt05 = {
},
};
static const struct drm_display_mode samsung_ltn140at29_301_mode = {
.clock = 76300,
.hdisplay = 1366,
.hsync_start = 1366 + 64,
.hsync_end = 1366 + 64 + 48,
.htotal = 1366 + 64 + 48 + 128,
.vdisplay = 768,
.vsync_start = 768 + 2,
.vsync_end = 768 + 2 + 5,
.vtotal = 768 + 2 + 5 + 17,
.vrefresh = 60,
};
static const struct panel_desc samsung_ltn140at29_301 = {
.modes = &samsung_ltn140at29_301_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 320,
.height = 187,
},
};
static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = {
.clock = 33300,
.hdisplay = 800,
.hsync_start = 800 + 1,
.hsync_end = 800 + 1 + 64,
.htotal = 800 + 1 + 64 + 64,
.vdisplay = 480,
.vsync_start = 480 + 1,
.vsync_end = 480 + 1 + 23,
.vtotal = 480 + 1 + 23 + 22,
.vrefresh = 60,
};
static const struct panel_desc shelly_sca07010_bfn_lnn = {
.modes = &shelly_sca07010_bfn_lnn_mode,
.num_modes = 1,
.size = {
.width = 152,
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct of_device_id platform_of_match[] = {
{
.compatible = "ampire,am800480r3tmqwa1h",
.data = &ampire_am800480r3tmqwa1h,
}, {
.compatible = "auo,b101aw03",
.data = &auo_b101aw03,
}, {
.compatible = "auo,b101ean01",
.data = &auo_b101ean01,
}, {
.compatible = "auo,b101xtn01",
.data = &auo_b101xtn01,
@ -825,6 +1040,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "hit,tx23d38vm0caa",
.data = &hitachi_tx23d38vm0caa
}, {
.compatible = "innolux,at043tn24",
.data = &innolux_at043tn24,
}, {
.compatible ="innolux,g121i1-l01",
.data = &innolux_g121i1_l01
@ -834,12 +1052,24 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "innolux,n156bge-l21",
.data = &innolux_n156bge_l21,
}, {
.compatible = "innolux,zj070na-01p",
.data = &innolux_zj070na_01p,
}, {
.compatible = "lg,lp129qe",
.data = &lg_lp129qe,
}, {
.compatible = "ortustech,com43h4m85ulc",
.data = &ortustech_com43h4m85ulc,
}, {
.compatible = "samsung,ltn101nt05",
.data = &samsung_ltn101nt05,
}, {
.compatible = "samsung,ltn140at29-301",
.data = &samsung_ltn140at29_301,
}, {
.compatible = "shelly,sca07010-bfn-lnn",
.data = &shelly_sca07010_bfn_lnn,
}, {
/* sentinel */
}

View File

@ -53,7 +53,6 @@ struct fence;
#define DRM_MODE_OBJECT_FB 0xfbfbfbfb
#define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb
#define DRM_MODE_OBJECT_PLANE 0xeeeeeeee
#define DRM_MODE_OBJECT_BRIDGE 0xbdbdbdbd
#define DRM_MODE_OBJECT_ANY 0
struct drm_mode_object {

View File

@ -29,6 +29,7 @@
struct drm_connector;
struct drm_device;
struct drm_panel;
struct display_timing;
/**
* struct drm_panel_funcs - perform operations on a given panel
@ -38,6 +39,8 @@ struct drm_panel;
* @enable: enable panel (turn on back light, etc.)
* @get_modes: add modes to the connector that the panel is attached to and
* return the number of modes added
* @get_timings: copy display timings into the provided array and return
* the number of display timings available
*
* The .prepare() function is typically called before the display controller
* starts to transmit video data. Panel drivers can use this to turn the panel
@ -68,6 +71,8 @@ struct drm_panel_funcs {
int (*prepare)(struct drm_panel *panel);
int (*enable)(struct drm_panel *panel);
int (*get_modes)(struct drm_panel *panel);
int (*get_timings)(struct drm_panel *panel, unsigned int num_timings,
struct display_timing *timings);
};
struct drm_panel {