lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Bluetooth: btmtkuart: add an implementation for boot-gpios property

Browse Source 
Not every platform has the pinctrl device integrates the GPIO the function
such as MT7621 whose pinctrl and GPIO are separate hardware so the driver
adds additional boot-gpios to let the MT766[3,8]U can enter the proper boot
mode by gpiod for such platform.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This commit is contained in:
Sean Wang 2019-06-02 09:04:16 +08:00 committed by Marcel Holtmann
parent 14e3ed84d7
commit a3cb6d602a
1 changed files with 25 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
drivers/bluetooth/btmtkuart.c
View File

@ -119,6 +119,7 @@ struct btmtkuart_dev {
struct regulator *vcc;
struct gpio_desc *reset;
struct gpio_desc *boot;
struct pinctrl *pinctrl;
struct pinctrl_state *pins_runtime;
struct pinctrl_state *pins_boot;
@ -911,6 +912,13 @@ static int btmtkuart_parse_dt(struct serdev_device *serdev)
return err;
}
bdev->boot = devm_gpiod_get_optional(&serdev->dev, "boot",
GPIOD_OUT_LOW);
if (IS_ERR(bdev->boot)) {
err = PTR_ERR(bdev->boot);
return err;
}
bdev->pinctrl = devm_pinctrl_get(&serdev->dev);
if (IS_ERR(bdev->pinctrl)) {
err = PTR_ERR(bdev->pinctrl);
@ -919,8 +927,10 @@ static int btmtkuart_parse_dt(struct serdev_device *serdev)
bdev->pins_boot = pinctrl_lookup_state(bdev->pinctrl,
"default");
if (IS_ERR(bdev->pins_boot)) {
if (IS_ERR(bdev->pins_boot) && !bdev->boot) {
err = PTR_ERR(bdev->pins_boot);
dev_err(&serdev->dev,
"Should assign RXD to LOW at boot stage\n");
return err;
}
@ -996,8 +1006,14 @@ static int btmtkuart_probe(struct serdev_device *serdev)
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
if (btmtkuart_is_standalone(bdev)) {
/* Switch to the specific pin state for the booting requires */
pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
if (bdev->boot) {
gpiod_set_value_cansleep(bdev->boot, 1);
} else {
/* Switch to the specific pin state for the booting
* requires.
*/
pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
}
/* Power on */
err = regulator_enable(bdev->vcc);
@ -1017,6 +1033,10 @@ static int btmtkuart_probe(struct serdev_device *serdev)
* mode the device requires for UART transfers.
*/
msleep(50);
if (bdev->boot)
devm_gpiod_put(&serdev->dev, bdev->boot);
pinctrl_select_state(bdev->pinctrl, bdev->pins_runtime);
/* A standalone device doesn't depends on power domain on SoC,
@ -1037,10 +1057,8 @@ static int btmtkuart_probe(struct serdev_device *serdev)
return 0;
err_regulator_disable:
if (btmtkuart_is_standalone(bdev)) {
pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
if (btmtkuart_is_standalone(bdev))
regulator_disable(bdev->vcc);
}
return err;
}
@ -1050,10 +1068,8 @@ static void btmtkuart_remove(struct serdev_device *serdev)
struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
struct hci_dev *hdev = bdev->hdev;
if (btmtkuart_is_standalone(bdev)) {
pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
if (btmtkuart_is_standalone(bdev))
regulator_disable(bdev->vcc);
}
hci_unregister_dev(hdev);
hci_free_dev(hdev);