orinoco: Move sources to a subdirectory
Keeping all the orinoco drivers in a common directory will make maintenance easier. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
David Kilroy
committed by
John W. Linville
John W. Linville
parent
5166ccd220
commit
b2e53b338b
544
drivers/net/wireless/orinoco/hermes.c
Normal file
544
drivers/net/wireless/orinoco/hermes.c
Normal file
@@ -0,0 +1,544 @@
|
||||
/* hermes.c
|
||||
*
|
||||
* Driver core for the "Hermes" wireless MAC controller, as used in
|
||||
* the Lucent Orinoco and Cabletron RoamAbout cards. It should also
|
||||
* work on the hfa3841 and hfa3842 MAC controller chips used in the
|
||||
* Prism II chipsets.
|
||||
*
|
||||
* This is not a complete driver, just low-level access routines for
|
||||
* the MAC controller itself.
|
||||
*
|
||||
* Based on the prism2 driver from Absolute Value Systems' linux-wlan
|
||||
* project, the Linux wvlan_cs driver, Lucent's HCF-Light
|
||||
* (wvlan_hcf.c) library, and the NetBSD wireless driver (in no
|
||||
* particular order).
|
||||
*
|
||||
* Copyright (C) 2000, David Gibson, Linuxcare Australia.
|
||||
* (C) Copyright David Gibson, IBM Corp. 2001-2003.
|
||||
*
|
||||
* The contents of this file are subject to the Mozilla Public License
|
||||
* Version 1.1 (the "License"); you may not use this file except in
|
||||
* compliance with the License. You may obtain a copy of the License
|
||||
* at http://www.mozilla.org/MPL/
|
||||
*
|
||||
* Software distributed under the License is distributed on an "AS IS"
|
||||
* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
|
||||
* the License for the specific language governing rights and
|
||||
* limitations under the License.
|
||||
*
|
||||
* Alternatively, the contents of this file may be used under the
|
||||
* terms of the GNU General Public License version 2 (the "GPL"), in
|
||||
* which case the provisions of the GPL are applicable instead of the
|
||||
* above. If you wish to allow the use of your version of this file
|
||||
* only under the terms of the GPL and not to allow others to use your
|
||||
* version of this file under the MPL, indicate your decision by
|
||||
* deleting the provisions above and replace them with the notice and
|
||||
* other provisions required by the GPL. If you do not delete the
|
||||
* provisions above, a recipient may use your version of this file
|
||||
* under either the MPL or the GPL.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include "hermes.h"
|
||||
|
||||
MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller");
|
||||
MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"
|
||||
" & David Gibson <hermes@gibson.dropbear.id.au>");
|
||||
MODULE_LICENSE("Dual MPL/GPL");
|
||||
|
||||
/* These are maximum timeouts. Most often, card wil react much faster */
|
||||
#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */
|
||||
#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */
|
||||
#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */
|
||||
#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
|
||||
|
||||
/*
|
||||
* Debugging helpers
|
||||
*/
|
||||
|
||||
#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \
|
||||
printk(stuff);} while (0)
|
||||
|
||||
#undef HERMES_DEBUG
|
||||
#ifdef HERMES_DEBUG
|
||||
#include <stdarg.h>
|
||||
|
||||
#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff)
|
||||
|
||||
#else /* ! HERMES_DEBUG */
|
||||
|
||||
#define DEBUG(lvl, stuff...) do { } while (0)
|
||||
|
||||
#endif /* ! HERMES_DEBUG */
|
||||
|
||||
|
||||
/*
|
||||
* Internal functions
|
||||
*/
|
||||
|
||||
/* Issue a command to the chip. Waiting for it to complete is the caller's
|
||||
problem.
|
||||
|
||||
Returns -EBUSY if the command register is busy, 0 on success.
|
||||
|
||||
Callable from any context.
|
||||
*/
|
||||
static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0,
|
||||
u16 param1, u16 param2)
|
||||
{
|
||||
int k = CMD_BUSY_TIMEOUT;
|
||||
u16 reg;
|
||||
|
||||
/* First wait for the command register to unbusy */
|
||||
reg = hermes_read_regn(hw, CMD);
|
||||
while ( (reg & HERMES_CMD_BUSY) && k ) {
|
||||
k--;
|
||||
udelay(1);
|
||||
reg = hermes_read_regn(hw, CMD);
|
||||
}
|
||||
if (reg & HERMES_CMD_BUSY) {
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
hermes_write_regn(hw, PARAM2, param2);
|
||||
hermes_write_regn(hw, PARAM1, param1);
|
||||
hermes_write_regn(hw, PARAM0, param0);
|
||||
hermes_write_regn(hw, CMD, cmd);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Function definitions
|
||||
*/
|
||||
|
||||
/* For doing cmds that wipe the magic constant in SWSUPPORT0 */
|
||||
int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
|
||||
u16 parm0, u16 parm1, u16 parm2,
|
||||
struct hermes_response *resp)
|
||||
{
|
||||
int err = 0;
|
||||
int k;
|
||||
u16 status, reg;
|
||||
|
||||
err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
reg = hermes_read_regn(hw, EVSTAT);
|
||||
k = CMD_INIT_TIMEOUT;
|
||||
while ((!(reg & HERMES_EV_CMD)) && k) {
|
||||
k--;
|
||||
udelay(10);
|
||||
reg = hermes_read_regn(hw, EVSTAT);
|
||||
}
|
||||
|
||||
hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
|
||||
|
||||
if (!hermes_present(hw)) {
|
||||
DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n",
|
||||
hw->iobase);
|
||||
err = -ENODEV;
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (!(reg & HERMES_EV_CMD)) {
|
||||
printk(KERN_ERR "hermes @ %p: "
|
||||
"Timeout waiting for card to reset (reg=0x%04x)!\n",
|
||||
hw->iobase, reg);
|
||||
err = -ETIMEDOUT;
|
||||
goto out;
|
||||
}
|
||||
|
||||
status = hermes_read_regn(hw, STATUS);
|
||||
if (resp) {
|
||||
resp->status = status;
|
||||
resp->resp0 = hermes_read_regn(hw, RESP0);
|
||||
resp->resp1 = hermes_read_regn(hw, RESP1);
|
||||
resp->resp2 = hermes_read_regn(hw, RESP2);
|
||||
}
|
||||
|
||||
hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
|
||||
|
||||
if (status & HERMES_STATUS_RESULT)
|
||||
err = -EIO;
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
EXPORT_SYMBOL(hermes_doicmd_wait);
|
||||
|
||||
void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing)
|
||||
{
|
||||
hw->iobase = address;
|
||||
hw->reg_spacing = reg_spacing;
|
||||
hw->inten = 0x0;
|
||||
}
|
||||
EXPORT_SYMBOL(hermes_struct_init);
|
||||
|
||||
int hermes_init(hermes_t *hw)
|
||||
{
|
||||
u16 reg;
|
||||
int err = 0;
|
||||
int k;
|
||||
|
||||
/* We don't want to be interrupted while resetting the chipset */
|
||||
hw->inten = 0x0;
|
||||
hermes_write_regn(hw, INTEN, 0);
|
||||
hermes_write_regn(hw, EVACK, 0xffff);
|
||||
|
||||
/* Normally it's a "can't happen" for the command register to
|
||||
be busy when we go to issue a command because we are
|
||||
serializing all commands. However we want to have some
|
||||
chance of resetting the card even if it gets into a stupid
|
||||
state, so we actually wait to see if the command register
|
||||
will unbusy itself here. */
|
||||
k = CMD_BUSY_TIMEOUT;
|
||||
reg = hermes_read_regn(hw, CMD);
|
||||
while (k && (reg & HERMES_CMD_BUSY)) {
|
||||
if (reg == 0xffff) /* Special case - the card has probably been removed,
|
||||
so don't wait for the timeout */
|
||||
return -ENODEV;
|
||||
|
||||
k--;
|
||||
udelay(1);
|
||||
reg = hermes_read_regn(hw, CMD);
|
||||
}
|
||||
|
||||
/* No need to explicitly handle the timeout - if we've timed
|
||||
out hermes_issue_cmd() will probably return -EBUSY below */
|
||||
|
||||
/* According to the documentation, EVSTAT may contain
|
||||
obsolete event occurrence information. We have to acknowledge
|
||||
it by writing EVACK. */
|
||||
reg = hermes_read_regn(hw, EVSTAT);
|
||||
hermes_write_regn(hw, EVACK, reg);
|
||||
|
||||
/* We don't use hermes_docmd_wait here, because the reset wipes
|
||||
the magic constant in SWSUPPORT0 away, and it gets confused */
|
||||
err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL);
|
||||
|
||||
return err;
|
||||
}
|
||||
EXPORT_SYMBOL(hermes_init);
|
||||
|
||||
/* Issue a command to the chip, and (busy!) wait for it to
|
||||
* complete.
|
||||
*
|
||||
* Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware
|
||||
*
|
||||
* Callable from any context, but locking is your problem. */
|
||||
int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
|
||||
struct hermes_response *resp)
|
||||
{
|
||||
int err;
|
||||
int k;
|
||||
u16 reg;
|
||||
u16 status;
|
||||
|
||||
err = hermes_issue_cmd(hw, cmd, parm0, 0, 0);
|
||||
if (err) {
|
||||
if (! hermes_present(hw)) {
|
||||
if (net_ratelimit())
|
||||
printk(KERN_WARNING "hermes @ %p: "
|
||||
"Card removed while issuing command "
|
||||
"0x%04x.\n", hw->iobase, cmd);
|
||||
err = -ENODEV;
|
||||
} else
|
||||
if (net_ratelimit())
|
||||
printk(KERN_ERR "hermes @ %p: "
|
||||
"Error %d issuing command 0x%04x.\n",
|
||||
hw->iobase, err, cmd);
|
||||
goto out;
|
||||
}
|
||||
|
||||
reg = hermes_read_regn(hw, EVSTAT);
|
||||
k = CMD_COMPL_TIMEOUT;
|
||||
while ( (! (reg & HERMES_EV_CMD)) && k) {
|
||||
k--;
|
||||
udelay(10);
|
||||
reg = hermes_read_regn(hw, EVSTAT);
|
||||
}
|
||||
|
||||
if (! hermes_present(hw)) {
|
||||
printk(KERN_WARNING "hermes @ %p: Card removed "
|
||||
"while waiting for command 0x%04x completion.\n",
|
||||
hw->iobase, cmd);
|
||||
err = -ENODEV;
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (! (reg & HERMES_EV_CMD)) {
|
||||
printk(KERN_ERR "hermes @ %p: Timeout waiting for "
|
||||
"command 0x%04x completion.\n", hw->iobase, cmd);
|
||||
err = -ETIMEDOUT;
|
||||
goto out;
|
||||
}
|
||||
|
||||
status = hermes_read_regn(hw, STATUS);
|
||||
if (resp) {
|
||||
resp->status = status;
|
||||
resp->resp0 = hermes_read_regn(hw, RESP0);
|
||||
resp->resp1 = hermes_read_regn(hw, RESP1);
|
||||
resp->resp2 = hermes_read_regn(hw, RESP2);
|
||||
}
|
||||
|
||||
hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
|
||||
|
||||
if (status & HERMES_STATUS_RESULT)
|
||||
err = -EIO;
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
EXPORT_SYMBOL(hermes_docmd_wait);
|
||||
|
||||
int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
|
||||
{
|
||||
int err = 0;
|
||||
int k;
|
||||
u16 reg;
|
||||
|
||||
if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) )
|
||||
return -EINVAL;
|
||||
|
||||
err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL);
|
||||
if (err) {
|
||||
return err;
|
||||
}
|
||||
|
||||
reg = hermes_read_regn(hw, EVSTAT);
|
||||
k = ALLOC_COMPL_TIMEOUT;
|
||||
while ( (! (reg & HERMES_EV_ALLOC)) && k) {
|
||||
k--;
|
||||
udelay(10);
|
||||
reg = hermes_read_regn(hw, EVSTAT);
|
||||
}
|
||||
|
||||
if (! hermes_present(hw)) {
|
||||
printk(KERN_WARNING "hermes @ %p: "
|
||||
"Card removed waiting for frame allocation.\n",
|
||||
hw->iobase);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
if (! (reg & HERMES_EV_ALLOC)) {
|
||||
printk(KERN_ERR "hermes @ %p: "
|
||||
"Timeout waiting for frame allocation\n",
|
||||
hw->iobase);
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
*fid = hermes_read_regn(hw, ALLOCFID);
|
||||
hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(hermes_allocate);
|
||||
|
||||
/* Set up a BAP to read a particular chunk of data from card's internal buffer.
|
||||
*
|
||||
* Returns: < 0 on internal failure (errno), 0 on success, >0 on error
|
||||
* from firmware
|
||||
*
|
||||
* Callable from any context */
|
||||
static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
|
||||
{
|
||||
int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0;
|
||||
int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0;
|
||||
int k;
|
||||
u16 reg;
|
||||
|
||||
/* Paranoia.. */
|
||||
if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) )
|
||||
return -EINVAL;
|
||||
|
||||
k = HERMES_BAP_BUSY_TIMEOUT;
|
||||
reg = hermes_read_reg(hw, oreg);
|
||||
while ((reg & HERMES_OFFSET_BUSY) && k) {
|
||||
k--;
|
||||
udelay(1);
|
||||
reg = hermes_read_reg(hw, oreg);
|
||||
}
|
||||
|
||||
if (reg & HERMES_OFFSET_BUSY)
|
||||
return -ETIMEDOUT;
|
||||
|
||||
/* Now we actually set up the transfer */
|
||||
hermes_write_reg(hw, sreg, id);
|
||||
hermes_write_reg(hw, oreg, offset);
|
||||
|
||||
/* Wait for the BAP to be ready */
|
||||
k = HERMES_BAP_BUSY_TIMEOUT;
|
||||
reg = hermes_read_reg(hw, oreg);
|
||||
while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
|
||||
k--;
|
||||
udelay(1);
|
||||
reg = hermes_read_reg(hw, oreg);
|
||||
}
|
||||
|
||||
if (reg != offset) {
|
||||
printk(KERN_ERR "hermes @ %p: BAP%d offset %s: "
|
||||
"reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap,
|
||||
(reg & HERMES_OFFSET_BUSY) ? "timeout" : "error",
|
||||
reg, id, offset);
|
||||
|
||||
if (reg & HERMES_OFFSET_BUSY) {
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
return -EIO; /* error or wrong offset */
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Read a block of data from the chip's buffer, via the
|
||||
* BAP. Synchronization/serialization is the caller's problem. len
|
||||
* must be even.
|
||||
*
|
||||
* Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
|
||||
*/
|
||||
int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
|
||||
u16 id, u16 offset)
|
||||
{
|
||||
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
|
||||
int err = 0;
|
||||
|
||||
if ( (len < 0) || (len % 2) )
|
||||
return -EINVAL;
|
||||
|
||||
err = hermes_bap_seek(hw, bap, id, offset);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
/* Actually do the transfer */
|
||||
hermes_read_words(hw, dreg, buf, len/2);
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
EXPORT_SYMBOL(hermes_bap_pread);
|
||||
|
||||
/* Write a block of data to the chip's buffer, via the
|
||||
* BAP. Synchronization/serialization is the caller's problem.
|
||||
*
|
||||
* Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
|
||||
*/
|
||||
int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
|
||||
u16 id, u16 offset)
|
||||
{
|
||||
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
|
||||
int err = 0;
|
||||
|
||||
if (len < 0)
|
||||
return -EINVAL;
|
||||
|
||||
err = hermes_bap_seek(hw, bap, id, offset);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
/* Actually do the transfer */
|
||||
hermes_write_bytes(hw, dreg, buf, len);
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
EXPORT_SYMBOL(hermes_bap_pwrite);
|
||||
|
||||
/* Read a Length-Type-Value record from the card.
|
||||
*
|
||||
* If length is NULL, we ignore the length read from the card, and
|
||||
* read the entire buffer regardless. This is useful because some of
|
||||
* the configuration records appear to have incorrect lengths in
|
||||
* practice.
|
||||
*
|
||||
* Callable from user or bh context. */
|
||||
int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
|
||||
u16 *length, void *buf)
|
||||
{
|
||||
int err = 0;
|
||||
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
|
||||
u16 rlength, rtype;
|
||||
unsigned nwords;
|
||||
|
||||
if ( (bufsize < 0) || (bufsize % 2) )
|
||||
return -EINVAL;
|
||||
|
||||
err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = hermes_bap_seek(hw, bap, rid, 0);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
rlength = hermes_read_reg(hw, dreg);
|
||||
|
||||
if (! rlength)
|
||||
return -ENODATA;
|
||||
|
||||
rtype = hermes_read_reg(hw, dreg);
|
||||
|
||||
if (length)
|
||||
*length = rlength;
|
||||
|
||||
if (rtype != rid)
|
||||
printk(KERN_WARNING "hermes @ %p: %s(): "
|
||||
"rid (0x%04x) does not match type (0x%04x)\n",
|
||||
hw->iobase, __func__, rid, rtype);
|
||||
if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize)
|
||||
printk(KERN_WARNING "hermes @ %p: "
|
||||
"Truncating LTV record from %d to %d bytes. "
|
||||
"(rid=0x%04x, len=0x%04x)\n", hw->iobase,
|
||||
HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength);
|
||||
|
||||
nwords = min((unsigned)rlength - 1, bufsize / 2);
|
||||
hermes_read_words(hw, dreg, buf, nwords);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(hermes_read_ltv);
|
||||
|
||||
int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
|
||||
u16 length, const void *value)
|
||||
{
|
||||
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
|
||||
int err = 0;
|
||||
unsigned count;
|
||||
|
||||
if (length == 0)
|
||||
return -EINVAL;
|
||||
|
||||
err = hermes_bap_seek(hw, bap, rid, 0);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
hermes_write_reg(hw, dreg, length);
|
||||
hermes_write_reg(hw, dreg, rid);
|
||||
|
||||
count = length - 1;
|
||||
|
||||
hermes_write_bytes(hw, dreg, value, count << 1);
|
||||
|
||||
err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE,
|
||||
rid, NULL);
|
||||
|
||||
return err;
|
||||
}
|
||||
EXPORT_SYMBOL(hermes_write_ltv);
|
||||
|
||||
static int __init init_hermes(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __exit exit_hermes(void)
|
||||
{
|
||||
}
|
||||
|
||||
module_init(init_hermes);
|
||||
module_exit(exit_hermes);
|
||||
Reference in New Issue
Block a user