lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

[PATCH] usb-storage: Some minor shuttle_usbat cleanups

Browse Source 
A while ago, Matthew Dharm wrote:
> Looks good.  Tho, I would like to see a future patch to do two things:
> 	1) Change comments from C++ style to C-style
> 	2) Make sure we're naming consistently everywhere SCM, USBAT,
> 	USBAT-02 (most noticably needing fixing is the string used at
> 	transport-selection time, but a sweep of all uses to be consistent
> 	would be in order).

Sorry for the long delay, here is a patch to address this. I also clarified
some ATA/ATAPI wording + function names.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/usb/storage/shuttle_usbat.c |  306 ++++++++++++++++++++----------------
 drivers/usb/storage/shuttle_usbat.h |   66 +++----
 drivers/usb/storage/transport.h     |    2
 drivers/usb/storage/unusual_devs.h  |   10 -
 drivers/usb/storage/usb.c           |    4
 5 files changed, 213 insertions(+), 175 deletions(-)
This commit is contained in:
Daniel Drake
2005-09-30 12:49:36 +01:00
committed by Greg Kroah-Hartman
parent a8798533c1
commit b7b1e65588
5 changed files with 213 additions and 175 deletions
Download Patch File Download Diff File Expand all files Collapse all files

306
drivers/usb/storage/shuttle_usbat.c
View File

@@ -1,4 +1,4 @@
/* Driver for SCM Microsystems USB-ATAPI cable /* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
* *
* $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $ * $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $
* *
@@ -67,10 +67,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
/* /*
* Convenience function to produce an ATAPI read/write sectors command * Convenience function to produce an ATA read/write sectors command
* Use cmd=0x20 for read, cmd=0x30 for write * Use cmd=0x20 for read, cmd=0x30 for write
*/ */
static void usbat_pack_atapi_sector_cmd(unsigned char *buf, static void usbat_pack_ata_sector_cmd(unsigned char *buf,
unsigned char thistime, unsigned char thistime,
u32 sector, unsigned char cmd) u32 sector, unsigned char cmd)
{ {
@@ -196,10 +196,12 @@ static int usbat_check_status(struct us_data *us)
if (rc != USB_STOR_XFER_GOOD) if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
if (*reply & 0x01 && *reply != 0x51) // error/check condition (0x51 is ok) /* error/check condition (0x51 is ok) */
if (*reply & 0x01 && *reply != 0x51)
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
if (*reply & 0x20) // device fault /* device fault */
if (*reply & 0x20)
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
return USB_STOR_TRANSPORT_GOOD; return USB_STOR_TRANSPORT_GOOD;
@@ -222,29 +224,39 @@ static int usbat_set_shuttle_features(struct us_data *us,
command[0] = 0x40; command[0] = 0x40;
command[1] = USBAT_CMD_SET_FEAT; command[1] = USBAT_CMD_SET_FEAT;
// The only bit relevant to ATA access is bit 6 /*
// which defines 8 bit data access (set) or 16 bit (unset) * The only bit relevant to ATA access is bit 6
* which defines 8 bit data access (set) or 16 bit (unset)
*/
command[2] = epp_control; command[2] = epp_control;
// If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, /*
// ET1 and ET2 define an external event to be checked for on event of a * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
// _read_blocks or _write_blocks operation. The read/write will not take * ET1 and ET2 define an external event to be checked for on event of a
// place unless the defined trigger signal is active. * _read_blocks or _write_blocks operation. The read/write will not take
* place unless the defined trigger signal is active.
*/
command[3] = external_trigger; command[3] = external_trigger;
// The resultant byte of the mask operation (see mask_byte) is compared for /*
// equivalence with this test pattern. If equal, the read/write will take * The resultant byte of the mask operation (see mask_byte) is compared for
// place. * equivalence with this test pattern. If equal, the read/write will take
* place.
*/
command[4] = test_pattern; command[4] = test_pattern;
// This value is logically ANDed with the status register field specified /*
// in the read/write command. * This value is logically ANDed with the status register field specified
* in the read/write command.
*/
command[5] = mask_byte; command[5] = mask_byte;
// If ALQ is set in the qualifier, this field contains the address of the /*
// registers where the byte count should be read for transferring the data. * If ALQ is set in the qualifier, this field contains the address of the
// If ALQ is not set, then this field contains the number of bytes to be * registers where the byte count should be read for transferring the data.
// transferred. * If ALQ is not set, then this field contains the number of bytes to be
* transferred.
*/
command[6] = subcountL; command[6] = subcountL;
command[7] = subcountH; command[7] = subcountH;
@@ -273,26 +285,26 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes)
if (result!=USB_STOR_XFER_GOOD) if (result!=USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
if (*status & 0x01) { // check condition if (*status & 0x01) { /* check condition */
result = usbat_read(us, USBAT_ATA, 0x10, status); result = usbat_read(us, USBAT_ATA, 0x10, status);
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
} }
if (*status & 0x20) // device fault if (*status & 0x20) /* device fault */
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
if ((*status & 0x80)==0x00) { // not busy if ((*status & 0x80)==0x00) { /* not busy */
US_DEBUGP("Waited not busy for %d steps\n", i); US_DEBUGP("Waited not busy for %d steps\n", i);
return USB_STOR_TRANSPORT_GOOD; return USB_STOR_TRANSPORT_GOOD;
} }
if (i<500) if (i<500)
msleep(10); // 5 seconds msleep(10); /* 5 seconds */
else if (i<700) else if (i<700)
msleep(50); // 10 seconds msleep(50); /* 10 seconds */
else if (i<1200) else if (i<1200)
msleep(100); // 50 seconds msleep(100); /* 50 seconds */
else else
msleep(1000); // X minutes msleep(1000); /* X minutes */
} }
US_DEBUGP("Waited not busy for %d minutes, timing out.\n", US_DEBUGP("Waited not busy for %d minutes, timing out.\n",
@@ -412,9 +424,12 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
if (i==0) { if (i==0) {
cmdlen = 16; cmdlen = 16;
// Write to multiple registers /*
// Not really sure the 0x07, 0x17, 0xfc, 0xe7 is necessary here, * Write to multiple registers
// but that's what came out of the trace every single time. * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is
* necessary here, but that's what came out of the
* trace every single time.
*/
command[0] = 0x40; command[0] = 0x40;
command[1] = access | USBAT_CMD_WRITE_REGS; command[1] = access | USBAT_CMD_WRITE_REGS;
command[2] = 0x07; command[2] = 0x07;
@@ -426,7 +441,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
} else } else
cmdlen = 8; cmdlen = 8;
// Conditionally read or write blocks /* Conditionally read or write blocks */
command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0); command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
command[cmdlen-7] = access | command[cmdlen-7] = access |
(direction==DMA_TO_DEVICE ? (direction==DMA_TO_DEVICE ?
@@ -456,11 +471,6 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
} }
//US_DEBUGP("Transfer %s %d bytes, sg buffers %d\n",
// direction == DMA_TO_DEVICE ? "out" : "in",
// len, use_sg);
result = usb_stor_bulk_transfer_sg(us, result = usb_stor_bulk_transfer_sg(us,
pipe, content, len, use_sg, NULL); pipe, content, len, use_sg, NULL);
@@ -508,9 +518,9 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
if (result!=USB_STOR_XFER_GOOD) if (result!=USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
if (*status & 0x01) // check condition if (*status & 0x01) /* check condition */
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
if (*status & 0x20) // device fault if (*status & 0x20) /* device fault */
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
US_DEBUGP("Redoing %s\n", US_DEBUGP("Redoing %s\n",
@@ -547,32 +557,32 @@ static int usbat_multiple_write(struct us_data *us,
BUG_ON(num_registers > US_IOBUF_SIZE/2); BUG_ON(num_registers > US_IOBUF_SIZE/2);
// Write to multiple registers, ATA access /* Write to multiple registers, ATA access */
command[0] = 0x40; command[0] = 0x40;
command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS; command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;
// No relevance /* No relevance */
command[2] = 0; command[2] = 0;
command[3] = 0; command[3] = 0;
command[4] = 0; command[4] = 0;
command[5] = 0; command[5] = 0;
// Number of bytes to be transferred (incl. addresses and data) /* Number of bytes to be transferred (incl. addresses and data) */
command[6] = LSB_of(num_registers*2); command[6] = LSB_of(num_registers*2);
command[7] = MSB_of(num_registers*2); command[7] = MSB_of(num_registers*2);
// The setup command /* The setup command */
result = usbat_execute_command(us, command, 8); result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD) if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
// Create the reg/data, reg/data sequence /* Create the reg/data, reg/data sequence */
for (i=0; i<num_registers; i++) { for (i=0; i<num_registers; i++) {
data[i<<1] = registers[i]; data[i<<1] = registers[i];
data[1+(i<<1)] = data_out[i]; data[1+(i<<1)] = data_out[i];
} }
// Send the data /* Send the data */
result = usbat_bulk_write(us, data, num_registers*2); result = usbat_bulk_write(us, data, num_registers*2);
if (result != USB_STOR_XFER_GOOD) if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
@@ -606,17 +616,17 @@ static int usbat_read_blocks(struct us_data *us,
command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK; command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
command[2] = USBAT_ATA_DATA; command[2] = USBAT_ATA_DATA;
command[3] = USBAT_ATA_STATUS; command[3] = USBAT_ATA_STATUS;
command[4] = 0xFD; // Timeout (ms); command[4] = 0xFD; /* Timeout (ms); */
command[5] = USBAT_QUAL_FCQ; command[5] = USBAT_QUAL_FCQ;
command[6] = LSB_of(len); command[6] = LSB_of(len);
command[7] = MSB_of(len); command[7] = MSB_of(len);
// Multiple block read setup command /* Multiple block read setup command */
result = usbat_execute_command(us, command, 8); result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD) if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
// Read the blocks we just asked for /* Read the blocks we just asked for */
result = usbat_bulk_read(us, buffer, len); result = usbat_bulk_read(us, buffer, len);
if (result != USB_STOR_XFER_GOOD) if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
@@ -647,17 +657,17 @@ static int usbat_write_blocks(struct us_data *us,
command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK; command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
command[2] = USBAT_ATA_DATA; command[2] = USBAT_ATA_DATA;
command[3] = USBAT_ATA_STATUS; command[3] = USBAT_ATA_STATUS;
command[4] = 0xFD; // Timeout (ms) command[4] = 0xFD; /* Timeout (ms) */
command[5] = USBAT_QUAL_FCQ; command[5] = USBAT_QUAL_FCQ;
command[6] = LSB_of(len); command[6] = LSB_of(len);
command[7] = MSB_of(len); command[7] = MSB_of(len);
// Multiple block write setup command /* Multiple block write setup command */
result = usbat_execute_command(us, command, 8); result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD) if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
// Write the data /* Write the data */
result = usbat_bulk_write(us, buffer, len); result = usbat_bulk_write(us, buffer, len);
if (result != USB_STOR_XFER_GOOD) if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
@@ -711,16 +721,20 @@ static int usbat_device_reset(struct us_data *us)
{ {
int rc; int rc;
// Reset peripheral, enable peripheral control signals /*
// (bring reset signal up) * Reset peripheral, enable peripheral control signals
* (bring reset signal up)
*/
rc = usbat_write_user_io(us, rc = usbat_write_user_io(us,
USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0, USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1); USBAT_UIO_EPAD | USBAT_UIO_1);
if (rc != USB_STOR_XFER_GOOD) if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
// Enable peripheral control signals /*
// (bring reset signal down) * Enable peripheral control signals
* (bring reset signal down)
*/
rc = usbat_write_user_io(us, rc = usbat_write_user_io(us,
USBAT_UIO_OE1 | USBAT_UIO_OE0, USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1); USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -737,7 +751,7 @@ static int usbat_device_enable_cdt(struct us_data *us)
{ {
int rc; int rc;
// Enable peripheral control signals and card detect /* Enable peripheral control signals and card detect */
rc = usbat_write_user_io(us, rc = usbat_write_user_io(us,
USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0, USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1); USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -786,7 +800,7 @@ static int usbat_flash_check_media(struct us_data *us,
if (rc != USB_STOR_XFER_GOOD) if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
// Check for media existence /* Check for media existence */
rc = usbat_flash_check_media_present(uio); rc = usbat_flash_check_media_present(uio);
if (rc == USBAT_FLASH_MEDIA_NONE) { if (rc == USBAT_FLASH_MEDIA_NONE) {
info->sense_key = 0x02; info->sense_key = 0x02;
@@ -795,11 +809,11 @@ static int usbat_flash_check_media(struct us_data *us,
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
} }
// Check for media change /* Check for media change */
rc = usbat_flash_check_media_changed(uio); rc = usbat_flash_check_media_changed(uio);
if (rc == USBAT_FLASH_MEDIA_CHANGED) { if (rc == USBAT_FLASH_MEDIA_CHANGED) {
// Reset and re-enable card detect /* Reset and re-enable card detect */
rc = usbat_device_reset(us); rc = usbat_device_reset(us);
if (rc != USB_STOR_TRANSPORT_GOOD) if (rc != USB_STOR_TRANSPORT_GOOD)
return rc; return rc;
@@ -855,13 +869,13 @@ static int usbat_identify_device(struct us_data *us,
if (rc != USB_STOR_XFER_GOOD) if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
// Check for error bit, or if the command 'fell through' /* Check for error bit, or if the command 'fell through' */
if (status == 0xA1 || !(status & 0x01)) { if (status == 0xA1 || !(status & 0x01)) {
// Device is HP 8200 /* Device is HP 8200 */
US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n"); US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
info->devicetype = USBAT_DEV_HP8200; info->devicetype = USBAT_DEV_HP8200;
} else { } else {
// Device is a CompactFlash reader/writer /* Device is a CompactFlash reader/writer */
US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
info->devicetype = USBAT_DEV_FLASH; info->devicetype = USBAT_DEV_FLASH;
} }
@@ -916,7 +930,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
if (!reply) if (!reply)
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
// ATAPI command : IDENTIFY DEVICE /* ATA command : IDENTIFY DEVICE */
rc = usbat_multiple_write(us, registers, command, 3); rc = usbat_multiple_write(us, registers, command, 3);
if (rc != USB_STOR_XFER_GOOD) { if (rc != USB_STOR_XFER_GOOD) {
US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n"); US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n");
@@ -924,7 +938,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
goto leave; goto leave;
} }
// Read device status /* Read device status */
if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) { if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
rc = USB_STOR_TRANSPORT_ERROR; rc = USB_STOR_TRANSPORT_ERROR;
goto leave; goto leave;
@@ -932,7 +946,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
msleep(100); msleep(100);
// Read the device identification data /* Read the device identification data */
rc = usbat_read_block(us, reply, 512); rc = usbat_read_block(us, reply, 512);
if (rc != USB_STOR_TRANSPORT_GOOD) if (rc != USB_STOR_TRANSPORT_GOOD)
goto leave; goto leave;
@@ -977,19 +991,23 @@ static int usbat_flash_read_data(struct us_data *us,
if (result != USB_STOR_TRANSPORT_GOOD) if (result != USB_STOR_TRANSPORT_GOOD)
return result; return result;
// we're working in LBA mode. according to the ATA spec, /*
// we can support up to 28-bit addressing. I don't know if Jumpshot * we're working in LBA mode. according to the ATA spec,
// supports beyond 24-bit addressing. It's kind of hard to test * we can support up to 28-bit addressing. I don't know if Jumpshot
// since it requires > 8GB CF card. * supports beyond 24-bit addressing. It's kind of hard to test
* since it requires > 8GB CF card.
*/
if (sector > 0x0FFFFFFF) if (sector > 0x0FFFFFFF)
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
totallen = sectors * info->ssize; totallen = sectors * info->ssize;
// Since we don't read more than 64 KB at a time, we have to create /*
// a bounce buffer and move the data a piece at a time between the * Since we don't read more than 64 KB at a time, we have to create
// bounce buffer and the actual transfer buffer. * a bounce buffer and move the data a piece at a time between the
* bounce buffer and the actual transfer buffer.
*/
alloclen = min(totallen, 65536u); alloclen = min(totallen, 65536u);
buffer = kmalloc(alloclen, GFP_NOIO); buffer = kmalloc(alloclen, GFP_NOIO);
@@ -997,27 +1015,29 @@ static int usbat_flash_read_data(struct us_data *us,
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
do { do {
// loop, never allocate or transfer more than 64k at once /*
// (min(128k, 255*info->ssize) is the real limit) * loop, never allocate or transfer more than 64k at once
* (min(128k, 255*info->ssize) is the real limit)
*/
len = min(totallen, alloclen); len = min(totallen, alloclen);
thistime = (len / info->ssize) & 0xff; thistime = (len / info->ssize) & 0xff;
// ATAPI command 0x20 (READ SECTORS) /* ATA command 0x20 (READ SECTORS) */
usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x20); usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20);
// Write/execute ATAPI read command /* Write/execute ATA read command */
result = usbat_multiple_write(us, registers, command, 7); result = usbat_multiple_write(us, registers, command, 7);
if (result != USB_STOR_TRANSPORT_GOOD) if (result != USB_STOR_TRANSPORT_GOOD)
goto leave; goto leave;
// Read the data we just requested /* Read the data we just requested */
result = usbat_read_blocks(us, buffer, len); result = usbat_read_blocks(us, buffer, len);
if (result != USB_STOR_TRANSPORT_GOOD) if (result != USB_STOR_TRANSPORT_GOOD)
goto leave; goto leave;
US_DEBUGP("usbat_flash_read_data: %d bytes\n", len); US_DEBUGP("usbat_flash_read_data: %d bytes\n", len);
// Store the data in the transfer buffer /* Store the data in the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, us->srb, usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg_idx, &sg_offset, TO_XFER_BUF); &sg_idx, &sg_offset, TO_XFER_BUF);
@@ -1061,19 +1081,23 @@ static int usbat_flash_write_data(struct us_data *us,
if (result != USB_STOR_TRANSPORT_GOOD) if (result != USB_STOR_TRANSPORT_GOOD)
return result; return result;
// we're working in LBA mode. according to the ATA spec, /*
// we can support up to 28-bit addressing. I don't know if Jumpshot * we're working in LBA mode. according to the ATA spec,
// supports beyond 24-bit addressing. It's kind of hard to test * we can support up to 28-bit addressing. I don't know if the device
// since it requires > 8GB CF card. * supports beyond 24-bit addressing. It's kind of hard to test
* since it requires > 8GB media.
*/
if (sector > 0x0FFFFFFF) if (sector > 0x0FFFFFFF)
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
totallen = sectors * info->ssize; totallen = sectors * info->ssize;
// Since we don't write more than 64 KB at a time, we have to create /*
// a bounce buffer and move the data a piece at a time between the * Since we don't write more than 64 KB at a time, we have to create
// bounce buffer and the actual transfer buffer. * a bounce buffer and move the data a piece at a time between the
* bounce buffer and the actual transfer buffer.
*/
alloclen = min(totallen, 65536u); alloclen = min(totallen, 65536u);
buffer = kmalloc(alloclen, GFP_NOIO); buffer = kmalloc(alloclen, GFP_NOIO);
@@ -1081,24 +1105,26 @@ static int usbat_flash_write_data(struct us_data *us,
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
do { do {
// loop, never allocate or transfer more than 64k at once /*
// (min(128k, 255*info->ssize) is the real limit) * loop, never allocate or transfer more than 64k at once
* (min(128k, 255*info->ssize) is the real limit)
*/
len = min(totallen, alloclen); len = min(totallen, alloclen);
thistime = (len / info->ssize) & 0xff; thistime = (len / info->ssize) & 0xff;
// Get the data from the transfer buffer /* Get the data from the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, us->srb, usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg_idx, &sg_offset, FROM_XFER_BUF); &sg_idx, &sg_offset, FROM_XFER_BUF);
// ATAPI command 0x30 (WRITE SECTORS) /* ATA command 0x30 (WRITE SECTORS) */
usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x30); usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30);
// Write/execute ATAPI write command /* Write/execute ATA write command */
result = usbat_multiple_write(us, registers, command, 7); result = usbat_multiple_write(us, registers, command, 7);
if (result != USB_STOR_TRANSPORT_GOOD) if (result != USB_STOR_TRANSPORT_GOOD)
goto leave; goto leave;
// Write the data /* Write the data */
result = usbat_write_blocks(us, buffer, len); result = usbat_write_blocks(us, buffer, len);
if (result != USB_STOR_TRANSPORT_GOOD) if (result != USB_STOR_TRANSPORT_GOOD)
goto leave; goto leave;
@@ -1169,42 +1195,44 @@ static int usbat_hp8200e_handle_read10(struct us_data *us,
srb->transfersize); srb->transfersize);
} }
// Since we only read in one block at a time, we have to create /*
// a bounce buffer and move the data a piece at a time between the * Since we only read in one block at a time, we have to create
// bounce buffer and the actual transfer buffer. * a bounce buffer and move the data a piece at a time between the
* bounce buffer and the actual transfer buffer.
*/
len = (65535/srb->transfersize) * srb->transfersize; len = (65535/srb->transfersize) * srb->transfersize;
US_DEBUGP("Max read is %d bytes\n", len); US_DEBUGP("Max read is %d bytes\n", len);
len = min(len, srb->request_bufflen); len = min(len, srb->request_bufflen);
buffer = kmalloc(len, GFP_NOIO); buffer = kmalloc(len, GFP_NOIO);
if (buffer == NULL) // bloody hell! if (buffer == NULL) /* bloody hell! */
return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_FAILED;
sector = short_pack(data[7+3], data[7+2]); sector = short_pack(data[7+3], data[7+2]);
sector <<= 16; sector <<= 16;
sector |= short_pack(data[7+5], data[7+4]); sector |= short_pack(data[7+5], data[7+4]);
transferred = 0; transferred = 0;
sg_segment = 0; // for keeping track of where we are in sg_segment = 0; /* for keeping track of where we are in */
sg_offset = 0; // the scatter/gather list sg_offset = 0; /* the scatter/gather list */
while (transferred != srb->request_bufflen) { while (transferred != srb->request_bufflen) {
if (len > srb->request_bufflen - transferred) if (len > srb->request_bufflen - transferred)
len = srb->request_bufflen - transferred; len = srb->request_bufflen - transferred;
data[3] = len&0xFF; // (cylL) = expected length (L) data[3] = len&0xFF; /* (cylL) = expected length (L) */
data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
// Fix up the SCSI command sector and num sectors /* Fix up the SCSI command sector and num sectors */
data[7+2] = MSB_of(sector>>16); // SCSI command sector data[7+2] = MSB_of(sector>>16); /* SCSI command sector */
data[7+3] = LSB_of(sector>>16); data[7+3] = LSB_of(sector>>16);
data[7+4] = MSB_of(sector&0xFFFF); data[7+4] = MSB_of(sector&0xFFFF);
data[7+5] = LSB_of(sector&0xFFFF); data[7+5] = LSB_of(sector&0xFFFF);
if (data[7+0] == GPCMD_READ_CD) if (data[7+0] == GPCMD_READ_CD)
data[7+6] = 0; data[7+6] = 0;
data[7+7] = MSB_of(len / srb->transfersize); // SCSI command data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */
data[7+8] = LSB_of(len / srb->transfersize); // num sectors data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */
result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
registers, data, 19, registers, data, 19,
@@ -1217,16 +1245,16 @@ static int usbat_hp8200e_handle_read10(struct us_data *us,
if (result != USB_STOR_TRANSPORT_GOOD) if (result != USB_STOR_TRANSPORT_GOOD)
break; break;
// Store the data in the transfer buffer /* Store the data in the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, srb, usb_stor_access_xfer_buf(buffer, len, srb,
&sg_segment, &sg_offset, TO_XFER_BUF); &sg_segment, &sg_offset, TO_XFER_BUF);
// Update the amount transferred and the sector number /* Update the amount transferred and the sector number */
transferred += len; transferred += len;
sector += len / srb->transfersize; sector += len / srb->transfersize;
} // while transferred != srb->request_bufflen } /* while transferred != srb->request_bufflen */
kfree(buffer); kfree(buffer);
return result; return result;
@@ -1237,7 +1265,7 @@ static int usbat_select_and_test_registers(struct us_data *us)
int selector; int selector;
unsigned char *status = us->iobuf; unsigned char *status = us->iobuf;
// try device = master, then device = slave. /* try device = master, then device = slave. */
for (selector = 0xA0; selector <= 0xB0; selector += 0x10) { for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) != if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
USB_STOR_XFER_GOOD) USB_STOR_XFER_GOOD)
@@ -1298,7 +1326,7 @@ int init_usbat(struct us_data *us)
memset(us->extra, 0, sizeof(struct usbat_info)); memset(us->extra, 0, sizeof(struct usbat_info));
info = (struct usbat_info *) (us->extra); info = (struct usbat_info *) (us->extra);
// Enable peripheral control signals /* Enable peripheral control signals */
rc = usbat_write_user_io(us, rc = usbat_write_user_io(us,
USBAT_UIO_OE1 | USBAT_UIO_OE0, USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1); USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -1337,7 +1365,7 @@ int init_usbat(struct us_data *us)
US_DEBUGP("INIT 5\n"); US_DEBUGP("INIT 5\n");
// Enable peripheral control signals and card detect /* Enable peripheral control signals and card detect */
rc = usbat_device_enable_cdt(us); rc = usbat_device_enable_cdt(us);
if (rc != USB_STOR_TRANSPORT_GOOD) if (rc != USB_STOR_TRANSPORT_GOOD)
return rc; return rc;
@@ -1364,7 +1392,7 @@ int init_usbat(struct us_data *us)
US_DEBUGP("INIT 9\n"); US_DEBUGP("INIT 9\n");
// At this point, we need to detect which device we are using /* At this point, we need to detect which device we are using */
if (usbat_set_transport(us, info)) if (usbat_set_transport(us, info))
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
@@ -1414,10 +1442,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
data[0] = 0x00; data[0] = 0x00;
data[1] = 0x00; data[1] = 0x00;
data[2] = 0x00; data[2] = 0x00;
data[3] = len&0xFF; // (cylL) = expected length (L) data[3] = len&0xFF; /* (cylL) = expected length (L) */
data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
data[5] = 0xB0; // (device sel) = slave data[5] = 0xB0; /* (device sel) = slave */
data[6] = 0xA0; // (command) = ATA PACKET COMMAND data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */
for (i=7; i<19; i++) { for (i=7; i<19; i++) {
registers[i] = 0x10; registers[i] = 0x10;
@@ -1466,13 +1494,15 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
return result; return result;
} }
// Write the 12-byte command header. /*
* Write the 12-byte command header.
// If the command is BLANK then set the timer for 75 minutes. *
// Otherwise set it for 10 minutes. * If the command is BLANK then set the timer for 75 minutes.
* Otherwise set it for 10 minutes.
// NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW *
// AT SPEED 4 IS UNRELIABLE!!! * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
* AT SPEED 4 IS UNRELIABLE!!!
*/
if ( (result = usbat_write_block(us, if ( (result = usbat_write_block(us,
USBAT_ATA, srb->cmnd, 12, USBAT_ATA, srb->cmnd, 12,
@@ -1481,19 +1511,18 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
return result; return result;
} }
// If there is response data to be read in /* If there is response data to be read in then do it here. */
// then do it here.
if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) { if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {
// How many bytes to read in? Check cylL register /* How many bytes to read in? Check cylL register */
if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
USB_STOR_XFER_GOOD) { USB_STOR_XFER_GOOD) {
return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_ERROR;
} }
if (len > 0xFF) { // need to read cylH also if (len > 0xFF) { /* need to read cylH also */
len = *status; len = *status;
if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
USB_STOR_XFER_GOOD) { USB_STOR_XFER_GOOD) {
@@ -1556,13 +1585,16 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
if (rc != USB_STOR_TRANSPORT_GOOD) if (rc != USB_STOR_TRANSPORT_GOOD)
return rc; return rc;
info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec /* hard coded 512 byte sectors as per ATA spec */
info->ssize = 0x200;
US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
info->sectors, info->ssize); info->sectors, info->ssize);
// build the reply /*
// note: must return the sector number of the last sector, * build the reply
// *not* the total number of sectors * note: must return the sector number of the last sector,
* *not* the total number of sectors
*/
((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
usb_stor_set_xfer_buf(ptr, 8, srb); usb_stor_set_xfer_buf(ptr, 8, srb);
@@ -1586,7 +1618,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
} }
if (srb->cmnd[0] == READ_12) { if (srb->cmnd[0] == READ_12) {
// I don't think we'll ever see a READ_12 but support it anyway... /*
* I don't think we'll ever see a READ_12 but support it anyway
*/
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
@@ -1608,7 +1642,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
} }
if (srb->cmnd[0] == WRITE_12) { if (srb->cmnd[0] == WRITE_12) {
// I don't think we'll ever see a WRITE_12 but support it anyway... /*
* I don't think we'll ever see a WRITE_12 but support it anyway
*/
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
@@ -1645,8 +1681,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
} }
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
// sure. whatever. not like we can stop the user from popping /*
// the media out of the device (no locking doors, etc) * sure. whatever. not like we can stop the user from popping
* the media out of the device (no locking doors, etc)
*/
return USB_STOR_TRANSPORT_GOOD; return USB_STOR_TRANSPORT_GOOD;
} }

66
drivers/usb/storage/shuttle_usbat.h
View File

@@ -55,8 +55,8 @@
#define USBAT_UIO_WRITE 0 #define USBAT_UIO_WRITE 0
/* Qualifier bits */ /* Qualifier bits */
#define USBAT_QUAL_FCQ 0x20 // full compare #define USBAT_QUAL_FCQ 0x20 /* full compare */
#define USBAT_QUAL_ALQ 0x10 // auto load subcount #define USBAT_QUAL_ALQ 0x10 /* auto load subcount */
/* USBAT Flash Media status types */ /* USBAT Flash Media status types */
#define USBAT_FLASH_MEDIA_NONE 0 #define USBAT_FLASH_MEDIA_NONE 0
@@ -67,39 +67,39 @@
#define USBAT_FLASH_MEDIA_CHANGED 1 #define USBAT_FLASH_MEDIA_CHANGED 1
/* USBAT ATA registers */ /* USBAT ATA registers */
#define USBAT_ATA_DATA 0x10 // read/write data (R/W) #define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */
#define USBAT_ATA_FEATURES 0x11 // set features (W) #define USBAT_ATA_FEATURES 0x11 /* set features (W) */
#define USBAT_ATA_ERROR 0x11 // error (R) #define USBAT_ATA_ERROR 0x11 /* error (R) */
#define USBAT_ATA_SECCNT 0x12 // sector count (R/W) #define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */
#define USBAT_ATA_SECNUM 0x13 // sector number (R/W) #define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */
#define USBAT_ATA_LBA_ME 0x14 // cylinder low (R/W) #define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */
#define USBAT_ATA_LBA_HI 0x15 // cylinder high (R/W) #define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */
#define USBAT_ATA_DEVICE 0x16 // head/device selection (R/W) #define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */
#define USBAT_ATA_STATUS 0x17 // device status (R) #define USBAT_ATA_STATUS 0x17 /* device status (R) */
#define USBAT_ATA_CMD 0x17 // device command (W) #define USBAT_ATA_CMD 0x17 /* device command (W) */
#define USBAT_ATA_ALTSTATUS 0x0E // status (no clear IRQ) (R) #define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */
/* USBAT User I/O Data registers */ /* USBAT User I/O Data registers */
#define USBAT_UIO_EPAD 0x80 // Enable Peripheral Control Signals #define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */
#define USBAT_UIO_CDT 0x40 // Card Detect (Read Only) #define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */
// CDT = ACKD & !UI1 & !UI0 /* CDT = ACKD & !UI1 & !UI0 */
#define USBAT_UIO_1 0x20 // I/O 1 #define USBAT_UIO_1 0x20 /* I/O 1 */
#define USBAT_UIO_0 0x10 // I/O 0 #define USBAT_UIO_0 0x10 /* I/O 0 */
#define USBAT_UIO_EPP_ATA 0x08 // 1=EPP mode, 0=ATA mode #define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */
#define USBAT_UIO_UI1 0x04 // Input 1 #define USBAT_UIO_UI1 0x04 /* Input 1 */
#define USBAT_UIO_UI0 0x02 // Input 0 #define USBAT_UIO_UI0 0x02 /* Input 0 */
#define USBAT_UIO_INTR_ACK 0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP) #define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
/* USBAT User I/O Enable registers */ /* USBAT User I/O Enable registers */
#define USBAT_UIO_DRVRST 0x80 // Reset Peripheral #define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */
#define USBAT_UIO_ACKD 0x40 // Enable Card Detect #define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */
#define USBAT_UIO_OE1 0x20 // I/O 1 set=output/clr=input #define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */
// If ACKD=1, set OE1 to 1 also. /* If ACKD=1, set OE1 to 1 also. */
#define USBAT_UIO_OE0 0x10 // I/O 0 set=output/clr=input #define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */
#define USBAT_UIO_ADPRST 0x01 // Reset SCM chip #define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */
/* USBAT Features */ /* USBAT Features */
#define USBAT_FEAT_ETEN 0x80 // External trigger enable #define USBAT_FEAT_ETEN 0x80 /* External trigger enable */
#define USBAT_FEAT_U1 0x08 #define USBAT_FEAT_U1 0x08
#define USBAT_FEAT_U0 0x04 #define USBAT_FEAT_U0 0x04
#define USBAT_FEAT_ET1 0x02 #define USBAT_FEAT_ET1 0x02
@@ -112,12 +112,12 @@ struct usbat_info {
int devicetype; int devicetype;
/* Used for Flash readers only */ /* Used for Flash readers only */
unsigned long sectors; // total sector count unsigned long sectors; /* total sector count */
unsigned long ssize; // sector size in bytes unsigned long ssize; /* sector size in bytes */
unsigned char sense_key; unsigned char sense_key;
unsigned long sense_asc; // additional sense code unsigned long sense_asc; /* additional sense code */
unsigned long sense_ascq; // additional sense code qualifier unsigned long sense_ascq; /* additional sense code qualifier */
}; };
#endif #endif

2
drivers/usb/storage/transport.h
View File

@@ -50,7 +50,7 @@
#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */ #define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
#define US_PR_BULK 0x50 /* bulk only */ #define US_PR_BULK 0x50 /* bulk only */
#ifdef CONFIG_USB_STORAGE_USBAT #ifdef CONFIG_USB_STORAGE_USBAT
#define US_PR_SCM_ATAPI 0x80 /* SCM-ATAPI bridge */ #define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
#endif #endif
#ifdef CONFIG_USB_STORAGE_SDDR09 #ifdef CONFIG_USB_STORAGE_SDDR09
#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ #define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */

10
drivers/usb/storage/unusual_devs.h
View File

@@ -71,12 +71,12 @@ UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
"HP", "HP",
"CD-Writer+ 8200e", "CD-Writer+ 8200e",
US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), US_SC_8070, US_PR_USBAT, init_usbat, 0),
UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
"HP", "HP",
"CD-Writer+ CD-4e", "CD-Writer+ CD-4e",
US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), US_SC_8070, US_PR_USBAT, init_usbat, 0),
#endif #endif
/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */ /* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
@@ -333,9 +333,9 @@ UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
#ifdef CONFIG_USB_STORAGE_USBAT #ifdef CONFIG_USB_STORAGE_USBAT
UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
"SCM", "Shuttle/SCM",
"SCM USBAT-02", "USBAT-02",
US_SC_SCSI, US_PR_SCM_ATAPI, init_usbat, US_SC_SCSI, US_PR_USBAT, init_usbat,
US_FL_SINGLE_LUN), US_FL_SINGLE_LUN),
#endif #endif

4
drivers/usb/storage/usb.c
View File

@@ -555,8 +555,8 @@ static int get_transport(struct us_data *us)
break; break;
#ifdef CONFIG_USB_STORAGE_USBAT #ifdef CONFIG_USB_STORAGE_USBAT
case US_PR_SCM_ATAPI: case US_PR_USBAT:
us->transport_name = "SCM/ATAPI"; us->transport_name = "Shuttle USBAT";
us->transport = usbat_transport; us->transport = usbat_transport;
us->transport_reset = usb_stor_CB_reset; us->transport_reset = usb_stor_CB_reset;
us->max_lun = 1; us->max_lun = 1;