Merge branch 'master' into for-next

Sync with Linus' tree to be able to apply pending patches that
are based on newer code already present upstream.

arch/x86/kernel/acpi/realmode/wakeup.S

@@ -28,6 +28,8 @@ pmode_cr3:	.long	0	/* Saved %cr3 */
 pmode_cr4:	.long	0	/* Saved %cr4 */
 pmode_efer:	.quad	0	/* Saved EFER */
 pmode_gdt:	.quad	0
+pmode_misc_en:	.quad	0	/* Saved MISC_ENABLE MSR */
+pmode_behavior:	.long	0	/* Wakeup behavior flags */
 realmode_flags:	.long	0
 real_magic:	.long	0
 trampoline_segment:	.word 0
@@ -91,6 +93,18 @@ wakeup_code:
 	/* Call the C code */
 	calll	main
 
+	/* Restore MISC_ENABLE before entering protected mode, in case
+	   BIOS decided to clear XD_DISABLE during S3. */
+	movl	pmode_behavior, %eax
+	btl	$WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax
+	jnc	1f
+
+	movl	pmode_misc_en, %eax
+	movl	pmode_misc_en + 4, %edx
+	movl	$MSR_IA32_MISC_ENABLE, %ecx
+	wrmsr
+1:
+
 	/* Do any other stuff... */
 
 #ifndef CONFIG_64BIT

arch/x86/kernel/acpi/realmode/wakeup.h

@@ -21,6 +21,9 @@ struct wakeup_header {
 	u32 pmode_efer_low;	/* Protected mode EFER */
 	u32 pmode_efer_high;
 	u64 pmode_gdt;
+	u32 pmode_misc_en_low;	/* Protected mode MISC_ENABLE */
+	u32 pmode_misc_en_high;
+	u32 pmode_behavior;	/* Wakeup routine behavior flags */
 	u32 realmode_flags;
 	u32 real_magic;
 	u16 trampoline_segment;	/* segment with trampoline code, 64-bit only */
@@ -39,4 +42,7 @@ extern struct wakeup_header wakeup_header;
 #define WAKEUP_HEADER_SIGNATURE 0x51ee1111
 #define WAKEUP_END_SIGNATURE	0x65a22c82
 
+/* Wakeup behavior bits */
+#define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE     0
+
 #endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */

arch/x86/kernel/acpi/sleep.c

@@ -77,6 +77,12 @@ int acpi_suspend_lowlevel(void)
 
 	header->pmode_cr0 = read_cr0();
 	header->pmode_cr4 = read_cr4_safe();
+	header->pmode_behavior = 0;
+	if (!rdmsr_safe(MSR_IA32_MISC_ENABLE,
+			&header->pmode_misc_en_low,
+			&header->pmode_misc_en_high))
+		header->pmode_behavior |=
+			(1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE);
 	header->realmode_flags = acpi_realmode_flags;
 	header->real_magic = 0x12345678;
 

arch/x86/kernel/apic/apic.c

@@ -390,7 +390,8 @@ static unsigned int reserve_eilvt_offset(int offset, unsigned int new)
 
 /*
  * If mask=1, the LVT entry does not generate interrupts while mask=0
- * enables the vector. See also the BKDGs.
+ * enables the vector. See also the BKDGs. Must be called with
+ * preemption disabled.
  */
 
 int setup_APIC_eilvt(u8 offset, u8 vector, u8 msg_type, u8 mask)

arch/x86/kernel/apic/x2apic_uv_x.c

@@ -632,14 +632,14 @@ late_initcall(uv_init_heartbeat);
 
 /* Direct Legacy VGA I/O traffic to designated IOH */
 int uv_set_vga_state(struct pci_dev *pdev, bool decode,
-		      unsigned int command_bits, bool change_bridge)
+		      unsigned int command_bits, u32 flags)
 {
 	int domain, bus, rc;
 
-	PR_DEVEL("devfn %x decode %d cmd %x chg_brdg %d\n",
-			pdev->devfn, decode, command_bits, change_bridge);
+	PR_DEVEL("devfn %x decode %d cmd %x flags %d\n",
+			pdev->devfn, decode, command_bits, flags);
 
-	if (!change_bridge)
+	if (!(flags & PCI_VGA_STATE_CHANGE_BRIDGE))
 		return 0;
 
 	if ((command_bits & PCI_COMMAND_IO) == 0)

arch/x86/kernel/devicetree.c

@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/of_pci.h>
+#include <linux/initrd.h>
 
 #include <asm/hpet.h>
 #include <asm/irq_controller.h>
@@ -98,6 +99,16 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 	return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
 }
 
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+					    unsigned long end)
+{
+	initrd_start = (unsigned long)__va(start);
+	initrd_end = (unsigned long)__va(end);
+	initrd_below_start_ok = 1;
+}
+#endif
+
 void __init add_dtb(u64 data)
 {
 	initial_dtb = data + offsetof(struct setup_data, data);

arch/x86/kernel/process.c

@@ -337,7 +337,7 @@ EXPORT_SYMBOL(boot_option_idle_override);
  * Powermanagement idle function, if any..
  */
 void (*pm_idle)(void);
-#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE)
+#ifdef CONFIG_APM_MODULE
 EXPORT_SYMBOL(pm_idle);
 #endif
 
@@ -399,7 +399,7 @@ void default_idle(void)
 		cpu_relax();
 	}
 }
-#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE)
+#ifdef CONFIG_APM_MODULE
 EXPORT_SYMBOL(default_idle);
 #endif
 

arch/x86/kernel/reboot.c

@@ -294,6 +294,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"),
 		},
 	},
+	{ /* Handle reboot issue on Acer Aspire one */
+		.callback = set_bios_reboot,
+		.ident = "Acer Aspire One A110",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"),
+		},
+	},
 	{ }
 };
 

arch/x86/kernel/smpboot.c

@@ -285,6 +285,19 @@ notrace static void __cpuinit start_secondary(void *unused)
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 	x86_platform.nmi_init();
 
+	/*
+	 * Wait until the cpu which brought this one up marked it
+	 * online before enabling interrupts. If we don't do that then
+	 * we can end up waking up the softirq thread before this cpu
+	 * reached the active state, which makes the scheduler unhappy
+	 * and schedule the softirq thread on the wrong cpu. This is
+	 * only observable with forced threaded interrupts, but in
+	 * theory it could also happen w/o them. It's just way harder
+	 * to achieve.
+	 */
+	while (!cpumask_test_cpu(smp_processor_id(), cpu_active_mask))
+		cpu_relax();
+
 	/* enable local interrupts */
 	local_irq_enable();