Merge commit 'origin/master' into next

Manual merge of:
	arch/powerpc/kernel/asm-offsets.c

Documentation/kernel-parameters.txt

@@ -56,7 +56,6 @@ parameter is applicable:
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
-	KMEMTRACE kmemtrace is enabled.
 	LIBATA  Libata driver is enabled
 	LP	Printer support is enabled.
 	LOOP	Loopback device support is enabled.
@@ -329,11 +328,6 @@ and is between 256 and 4096 characters. It is defined in the file
 				    flushed before they will be reused, which
 				    is a lot of faster
 
-	amd_iommu_size= [HW,X86-64]
-			Define the size of the aperture for the AMD IOMMU
-			driver. Possible values are:
-			'32M', '64M' (default), '128M', '256M', '512M', '1G'
-
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -653,6 +647,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			DMA-API debugging code disables itself because the
 			architectural default is too low.
 
+	dma_debug_driver=<driver_name>
+			With this option the DMA-API debugging driver
+			filter feature can be enabled at boot time. Just
+			pass the driver to filter for as the parameter.
+			The filter can be disabled or changed to another
+			driver later using sysfs.
+
 	dscc4.setup=	[NET]
 
 	dtc3181e=	[HW,SCSI]
@@ -759,12 +760,25 @@ and is between 256 and 4096 characters. It is defined in the file
 			ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
 
 	ftrace=[tracer]
-			[ftrace] will set and start the specified tracer
+			[FTRACE] will set and start the specified tracer
 			as early as possible in order to facilitate early
 			boot debugging.
 
 	ftrace_dump_on_oops
-			[ftrace] will dump the trace buffers on oops.
+			[FTRACE] will dump the trace buffers on oops.
+
+	ftrace_filter=[function-list]
+			[FTRACE] Limit the functions traced by the function
+			tracer at boot up. function-list is a comma separated
+			list of functions. This list can be changed at run
+			time by the set_ftrace_filter file in the debugfs
+			tracing directory. 
+
+	ftrace_notrace=[function-list]
+			[FTRACE] Do not trace the functions specified in
+			function-list. This list can be changed at run time
+			by the set_ftrace_notrace file in the debugfs
+			tracing directory.
 
 	gamecon.map[2|3]=
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
@@ -921,6 +935,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Formt: { "sha1" | "md5" }
 			default: "sha1"
 
+	ima_tcb		[IMA]
+			Load a policy which meets the needs of the Trusted
+			Computing Base.  This means IMA will measure all
+			programs exec'd, files mmap'd for exec, and all files
+			opened for read by uid=0.
+
 	in2000=		[HW,SCSI]
 			See header of drivers/scsi/in2000.c.
 
@@ -1061,15 +1081,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			use the HighMem zone if it exists, and the Normal
 			zone if it does not.
 
-	kmemtrace.enable=	[KNL,KMEMTRACE] Format: { yes | no }
-				Controls whether kmemtrace is enabled
-				at boot-time.
-
-	kmemtrace.subbufs=n	[KNL,KMEMTRACE] Overrides the number of
-			subbufs kmemtrace's relay channel has. Set this
-			higher than default (KMEMTRACE_N_SUBBUFS in code) if
-			you experience buffer overruns.
-
 	kgdboc=		[HW] kgdb over consoles.
 			Requires a tty driver that supports console polling.
 			(only serial suported for now)
@@ -1079,6 +1090,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
+	kmemleak=	[KNL] Boot-time kmemleak enable/disable
+			Valid arguments: on, off
+			Default: on
+
 	kstack=N	[X86] Print N words from the kernel stack
 			in oops dumps.
 
@@ -1582,6 +1597,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	noinitrd	[RAM] Tells the kernel not to load any configured
 			initial RAM disk.
 
+	nointremap	[X86-64, Intel-IOMMU] Do not enable interrupt
+			remapping.
+
 	nointroute	[IA-64]
 
 	nojitter	[IA64] Disables jitter checking for ITC timers.
@@ -1667,6 +1685,14 @@ and is between 256 and 4096 characters. It is defined in the file
 	oprofile.timer=	[HW]
 			Use timer interrupt instead of performance counters
 
+	oprofile.cpu_type=	Force an oprofile cpu type
+			This might be useful if you have an older oprofile
+			userland or if you want common events.
+			Format: { archperfmon }
+			archperfmon: [X86] Force use of architectural
+				perfmon on Intel CPUs instead of the
+				CPU specific event set.
+
 	osst=		[HW,SCSI] SCSI Tape Driver
 			Format: <buffer_size>,<write_threshold>
 			See also Documentation/scsi/st.txt.