drm/i915: handle DDI-related assertions

Prevent bogus asserts on DDI-related paths.

Longer explanation from Eugeni by mail:

"For the asserts there are 3 paths where we hit them:
- in assert_fdi_tx (we don't have the FDI_TX_CTL anymore, backup plan
  DDI_FUNC_CTL is used instead)
- in assert_fdi_tx_pll_enabled (we have the combination of iCLKIP and
  DDI_FUNC_CTL, plus PORT_CLK_SEL and PIPE_CLK_SEL now to make things
  work). We could use an assert here indeed - if we configure port to
  use one clock, and pipe to use another, everything hangs. Right now,
  we configure all of them in one place only; but yes, when DP code
  lands it will get more funky.
- and in ironlake_fdi_pll_enable. I reuse part of this function (to
  configure the TU sizes), but as in the 1st case, FDI_TX_CTL is gone
  so I just ignore it here."

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: Pasted Eugeni's explanation into the commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
Eugeni Dodonov 2012-05-09 15:37:18 -03:00 committed by Daniel Vetter
parent 9d82aa1740
commit bf507ef7aa

View File

@ -953,9 +953,16 @@ static void assert_fdi_tx(struct drm_i915_private *dev_priv,
u32 val;
bool cur_state;
reg = FDI_TX_CTL(pipe);
val = I915_READ(reg);
cur_state = !!(val & FDI_TX_ENABLE);
if (IS_HASWELL(dev_priv->dev)) {
/* On Haswell, DDI is used instead of FDI_TX_CTL */
reg = DDI_FUNC_CTL(pipe);
val = I915_READ(reg);
cur_state = !!(val & PIPE_DDI_FUNC_ENABLE);
} else {
reg = FDI_TX_CTL(pipe);
val = I915_READ(reg);
cur_state = !!(val & FDI_TX_ENABLE);
}
WARN(cur_state != state,
"FDI TX state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
@ -990,6 +997,10 @@ static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
if (dev_priv->info->gen == 5)
return;
/* On Haswell, DDI ports are responsible for the FDI PLL setup */
if (IS_HASWELL(dev_priv->dev))
return;
reg = FDI_TX_CTL(pipe);
val = I915_READ(reg);
WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
@ -2514,14 +2525,18 @@ static void ironlake_fdi_pll_enable(struct drm_crtc *crtc)
POSTING_READ(reg);
udelay(200);
/* Enable CPU FDI TX PLL, always on for Ironlake */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
if ((temp & FDI_TX_PLL_ENABLE) == 0) {
I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
/* On Haswell, the PLL configuration for ports and pipes is handled
* separately, as part of DDI setup */
if (!IS_HASWELL(dev)) {
/* Enable CPU FDI TX PLL, always on for Ironlake */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
if ((temp & FDI_TX_PLL_ENABLE) == 0) {
I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
POSTING_READ(reg);
udelay(100);
POSTING_READ(reg);
udelay(100);
}
}
}