lk/linux-kernel-test
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

[POWERPC] Update mpc7448hpc2 board irq support using device tree

Browse Source 
The patch rewrites mpc7448hpc2 board irq support according to the new
mpic device tree interface.

Signed-off-by: Roy Zang	<tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This commit is contained in:
Zang Roy-r61911
2006-08-23 10:19:50 +08:00
committed by Paul Mackerras
parent 6cdd2bdfb9
commit c4342ff92b
5 changed files with 174 additions and 68 deletions
Download Patch File Download Diff File Expand all files Collapse all files

73
arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
View File

@@ -1,7 +1,7 @@
/*
* mpc7448_hpc2.c
*
* Board setup routines for the Freescale Taiga platform
* Board setup routines for the Freescale mpc7448hpc2(taiga) platform
*
* Author: Jacob Pan
* jacob.pan@freescale.com
@@ -12,10 +12,10 @@
*
* Copyright 2004-2006 Freescale Semiconductor, Inc.
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
@@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
extern int tsi108_setup_pci(struct device_node *dev);
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
extern void tsi108_pci_int_init(void);
extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused);
/*
* Define all of the IRQ senses and polarities. Taken from the
* mpc7448hpc manual.
* Note: Likely, this table and the following function should be
* obtained and derived from the OF Device Tree.
*/
static u_char mpc7448_hpc2_pic_initsenses[] __initdata = {
/* External on-board sources */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */
/* Internal Tsi108/109 interrupt sources */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */
};
extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
struct pt_regs *regs);
int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
{
@@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void)
{
struct mpic *mpic;
phys_addr_t mpic_paddr = 0;
unsigned int cascade_pci_irq;
struct device_node *tsi_pci;
struct device_node *tsi_pic;
tsi_pic = of_find_node_by_type(NULL, "open-pic");
@@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void)
DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
(u32) mpic_paddr);
mpic = mpic_alloc(mpic_paddr,
mpic = mpic_alloc(tsi_pic, mpic_paddr,
MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108),
0, /* num_sources used */
TSI108_IRQ_BASE,
0, /* num_sources used */
NR_IRQS - 4 /* XXXX */,
mpc7448_hpc2_pic_initsenses,
sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC");
"Tsi108_PIC");
BUG_ON(mpic == NULL); /* XXXX */
mpic_init(mpic);
mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic);
tsi_pci = of_find_node_by_type(NULL, "pci");
if (tsi_pci == 0) {
printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
return;
}
cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
set_irq_data(cascade_pci_irq, mpic);
set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
tsi108_pci_int_init();
/* Configure MPIC outputs to CPU0 */
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
of_node_put(tsi_pic);
}
void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
@@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs)
return 0;
}
define_machine(mpc7448_hpc2){
.name = "MPC7448 HPC2",
.probe = mpc7448_hpc2_probe,