spi: reorganize drivers
Sort the SPI makefile and enforce the naming convention spi_*.c for
spi drivers.
This change also rolls the contents of atmel_spi.h into the .c file
since there is only one user of that particular include file.
v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be
be the predominant pattern for subsystem prefixes.
- Clean up filenames in Kconfig and header comment blocks
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Grant Likely
944
drivers/spi/spi-imx.c
Normal file
944
drivers/spi/spi-imx.c
Normal file
@@ -0,0 +1,944 @@
|
||||
/*
|
||||
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||
* Copyright (C) 2008 Juergen Beisert
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the
|
||||
* Free Software Foundation
|
||||
* 51 Franklin Street, Fifth Floor
|
||||
* Boston, MA 02110-1301, USA.
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/completion.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/spi_bitbang.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#include <mach/spi.h>
|
||||
|
||||
#define DRIVER_NAME "spi_imx"
|
||||
|
||||
#define MXC_CSPIRXDATA 0x00
|
||||
#define MXC_CSPITXDATA 0x04
|
||||
#define MXC_CSPICTRL 0x08
|
||||
#define MXC_CSPIINT 0x0c
|
||||
#define MXC_RESET 0x1c
|
||||
|
||||
#define MX3_CSPISTAT 0x14
|
||||
#define MX3_CSPISTAT_RR (1 << 3)
|
||||
|
||||
/* generic defines to abstract from the different register layouts */
|
||||
#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */
|
||||
#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */
|
||||
|
||||
struct spi_imx_config {
|
||||
unsigned int speed_hz;
|
||||
unsigned int bpw;
|
||||
unsigned int mode;
|
||||
u8 cs;
|
||||
};
|
||||
|
||||
enum spi_imx_devtype {
|
||||
SPI_IMX_VER_IMX1,
|
||||
SPI_IMX_VER_0_0,
|
||||
SPI_IMX_VER_0_4,
|
||||
SPI_IMX_VER_0_5,
|
||||
SPI_IMX_VER_0_7,
|
||||
SPI_IMX_VER_2_3,
|
||||
};
|
||||
|
||||
struct spi_imx_data;
|
||||
|
||||
struct spi_imx_devtype_data {
|
||||
void (*intctrl)(struct spi_imx_data *, int);
|
||||
int (*config)(struct spi_imx_data *, struct spi_imx_config *);
|
||||
void (*trigger)(struct spi_imx_data *);
|
||||
int (*rx_available)(struct spi_imx_data *);
|
||||
void (*reset)(struct spi_imx_data *);
|
||||
unsigned int fifosize;
|
||||
};
|
||||
|
||||
struct spi_imx_data {
|
||||
struct spi_bitbang bitbang;
|
||||
|
||||
struct completion xfer_done;
|
||||
void *base;
|
||||
int irq;
|
||||
struct clk *clk;
|
||||
unsigned long spi_clk;
|
||||
int *chipselect;
|
||||
|
||||
unsigned int count;
|
||||
void (*tx)(struct spi_imx_data *);
|
||||
void (*rx)(struct spi_imx_data *);
|
||||
void *rx_buf;
|
||||
const void *tx_buf;
|
||||
unsigned int txfifo; /* number of words pushed in tx FIFO */
|
||||
|
||||
struct spi_imx_devtype_data devtype_data;
|
||||
};
|
||||
|
||||
#define MXC_SPI_BUF_RX(type) \
|
||||
static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \
|
||||
{ \
|
||||
unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); \
|
||||
\
|
||||
if (spi_imx->rx_buf) { \
|
||||
*(type *)spi_imx->rx_buf = val; \
|
||||
spi_imx->rx_buf += sizeof(type); \
|
||||
} \
|
||||
}
|
||||
|
||||
#define MXC_SPI_BUF_TX(type) \
|
||||
static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx) \
|
||||
{ \
|
||||
type val = 0; \
|
||||
\
|
||||
if (spi_imx->tx_buf) { \
|
||||
val = *(type *)spi_imx->tx_buf; \
|
||||
spi_imx->tx_buf += sizeof(type); \
|
||||
} \
|
||||
\
|
||||
spi_imx->count -= sizeof(type); \
|
||||
\
|
||||
writel(val, spi_imx->base + MXC_CSPITXDATA); \
|
||||
}
|
||||
|
||||
MXC_SPI_BUF_RX(u8)
|
||||
MXC_SPI_BUF_TX(u8)
|
||||
MXC_SPI_BUF_RX(u16)
|
||||
MXC_SPI_BUF_TX(u16)
|
||||
MXC_SPI_BUF_RX(u32)
|
||||
MXC_SPI_BUF_TX(u32)
|
||||
|
||||
/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
|
||||
* (which is currently not the case in this driver)
|
||||
*/
|
||||
static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
|
||||
256, 384, 512, 768, 1024};
|
||||
|
||||
/* MX21, MX27 */
|
||||
static unsigned int spi_imx_clkdiv_1(unsigned int fin,
|
||||
unsigned int fspi)
|
||||
{
|
||||
int i, max;
|
||||
|
||||
if (cpu_is_mx21())
|
||||
max = 18;
|
||||
else
|
||||
max = 16;
|
||||
|
||||
for (i = 2; i < max; i++)
|
||||
if (fspi * mxc_clkdivs[i] >= fin)
|
||||
return i;
|
||||
|
||||
return max;
|
||||
}
|
||||
|
||||
/* MX1, MX31, MX35, MX51 CSPI */
|
||||
static unsigned int spi_imx_clkdiv_2(unsigned int fin,
|
||||
unsigned int fspi)
|
||||
{
|
||||
int i, div = 4;
|
||||
|
||||
for (i = 0; i < 7; i++) {
|
||||
if (fspi * div >= fin)
|
||||
return i;
|
||||
div <<= 1;
|
||||
}
|
||||
|
||||
return 7;
|
||||
}
|
||||
|
||||
#define SPI_IMX2_3_CTRL 0x08
|
||||
#define SPI_IMX2_3_CTRL_ENABLE (1 << 0)
|
||||
#define SPI_IMX2_3_CTRL_XCH (1 << 2)
|
||||
#define SPI_IMX2_3_CTRL_MODE_MASK (0xf << 4)
|
||||
#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8
|
||||
#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12
|
||||
#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18)
|
||||
#define SPI_IMX2_3_CTRL_BL_OFFSET 20
|
||||
|
||||
#define SPI_IMX2_3_CONFIG 0x0c
|
||||
#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
|
||||
#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
|
||||
#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
|
||||
#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
|
||||
|
||||
#define SPI_IMX2_3_INT 0x10
|
||||
#define SPI_IMX2_3_INT_TEEN (1 << 0)
|
||||
#define SPI_IMX2_3_INT_RREN (1 << 3)
|
||||
|
||||
#define SPI_IMX2_3_STAT 0x18
|
||||
#define SPI_IMX2_3_STAT_RR (1 << 3)
|
||||
|
||||
/* MX51 eCSPI */
|
||||
static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi)
|
||||
{
|
||||
/*
|
||||
* there are two 4-bit dividers, the pre-divider divides by
|
||||
* $pre, the post-divider by 2^$post
|
||||
*/
|
||||
unsigned int pre, post;
|
||||
|
||||
if (unlikely(fspi > fin))
|
||||
return 0;
|
||||
|
||||
post = fls(fin) - fls(fspi);
|
||||
if (fin > fspi << post)
|
||||
post++;
|
||||
|
||||
/* now we have: (fin <= fspi << post) with post being minimal */
|
||||
|
||||
post = max(4U, post) - 4;
|
||||
if (unlikely(post > 0xf)) {
|
||||
pr_err("%s: cannot set clock freq: %u (base freq: %u)\n",
|
||||
__func__, fspi, fin);
|
||||
return 0xff;
|
||||
}
|
||||
|
||||
pre = DIV_ROUND_UP(fin, fspi << post) - 1;
|
||||
|
||||
pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
|
||||
__func__, fin, fspi, post, pre);
|
||||
return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) |
|
||||
(post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET);
|
||||
}
|
||||
|
||||
static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable)
|
||||
{
|
||||
unsigned val = 0;
|
||||
|
||||
if (enable & MXC_INT_TE)
|
||||
val |= SPI_IMX2_3_INT_TEEN;
|
||||
|
||||
if (enable & MXC_INT_RR)
|
||||
val |= SPI_IMX2_3_INT_RREN;
|
||||
|
||||
writel(val, spi_imx->base + SPI_IMX2_3_INT);
|
||||
}
|
||||
|
||||
static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
u32 reg;
|
||||
|
||||
reg = readl(spi_imx->base + SPI_IMX2_3_CTRL);
|
||||
reg |= SPI_IMX2_3_CTRL_XCH;
|
||||
writel(reg, spi_imx->base + SPI_IMX2_3_CTRL);
|
||||
}
|
||||
|
||||
static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx,
|
||||
struct spi_imx_config *config)
|
||||
{
|
||||
u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0;
|
||||
|
||||
/*
|
||||
* The hardware seems to have a race condition when changing modes. The
|
||||
* current assumption is that the selection of the channel arrives
|
||||
* earlier in the hardware than the mode bits when they are written at
|
||||
* the same time.
|
||||
* So set master mode for all channels as we do not support slave mode.
|
||||
*/
|
||||
ctrl |= SPI_IMX2_3_CTRL_MODE_MASK;
|
||||
|
||||
/* set clock speed */
|
||||
ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz);
|
||||
|
||||
/* set chip select to use */
|
||||
ctrl |= SPI_IMX2_3_CTRL_CS(config->cs);
|
||||
|
||||
ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET;
|
||||
|
||||
cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs);
|
||||
|
||||
if (config->mode & SPI_CPHA)
|
||||
cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs);
|
||||
|
||||
if (config->mode & SPI_CPOL)
|
||||
cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs);
|
||||
|
||||
if (config->mode & SPI_CS_HIGH)
|
||||
cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs);
|
||||
|
||||
writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL);
|
||||
writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR;
|
||||
}
|
||||
|
||||
static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
/* drain receive buffer */
|
||||
while (spi_imx2_3_rx_available(spi_imx))
|
||||
readl(spi_imx->base + MXC_CSPIRXDATA);
|
||||
}
|
||||
|
||||
#define MX31_INTREG_TEEN (1 << 0)
|
||||
#define MX31_INTREG_RREN (1 << 3)
|
||||
|
||||
#define MX31_CSPICTRL_ENABLE (1 << 0)
|
||||
#define MX31_CSPICTRL_MASTER (1 << 1)
|
||||
#define MX31_CSPICTRL_XCH (1 << 2)
|
||||
#define MX31_CSPICTRL_POL (1 << 4)
|
||||
#define MX31_CSPICTRL_PHA (1 << 5)
|
||||
#define MX31_CSPICTRL_SSCTL (1 << 6)
|
||||
#define MX31_CSPICTRL_SSPOL (1 << 7)
|
||||
#define MX31_CSPICTRL_BC_SHIFT 8
|
||||
#define MX35_CSPICTRL_BL_SHIFT 20
|
||||
#define MX31_CSPICTRL_CS_SHIFT 24
|
||||
#define MX35_CSPICTRL_CS_SHIFT 12
|
||||
#define MX31_CSPICTRL_DR_SHIFT 16
|
||||
|
||||
#define MX31_CSPISTATUS 0x14
|
||||
#define MX31_STATUS_RR (1 << 3)
|
||||
|
||||
/* These functions also work for the i.MX35, but be aware that
|
||||
* the i.MX35 has a slightly different register layout for bits
|
||||
* we do not use here.
|
||||
*/
|
||||
static void __maybe_unused mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
|
||||
{
|
||||
unsigned int val = 0;
|
||||
|
||||
if (enable & MXC_INT_TE)
|
||||
val |= MX31_INTREG_TEEN;
|
||||
if (enable & MXC_INT_RR)
|
||||
val |= MX31_INTREG_RREN;
|
||||
|
||||
writel(val, spi_imx->base + MXC_CSPIINT);
|
||||
}
|
||||
|
||||
static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
unsigned int reg;
|
||||
|
||||
reg = readl(spi_imx->base + MXC_CSPICTRL);
|
||||
reg |= MX31_CSPICTRL_XCH;
|
||||
writel(reg, spi_imx->base + MXC_CSPICTRL);
|
||||
}
|
||||
|
||||
static int __maybe_unused spi_imx0_4_config(struct spi_imx_data *spi_imx,
|
||||
struct spi_imx_config *config)
|
||||
{
|
||||
unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
|
||||
int cs = spi_imx->chipselect[config->cs];
|
||||
|
||||
reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
|
||||
MX31_CSPICTRL_DR_SHIFT;
|
||||
|
||||
reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
|
||||
|
||||
if (config->mode & SPI_CPHA)
|
||||
reg |= MX31_CSPICTRL_PHA;
|
||||
if (config->mode & SPI_CPOL)
|
||||
reg |= MX31_CSPICTRL_POL;
|
||||
if (config->mode & SPI_CS_HIGH)
|
||||
reg |= MX31_CSPICTRL_SSPOL;
|
||||
if (cs < 0)
|
||||
reg |= (cs + 32) << MX31_CSPICTRL_CS_SHIFT;
|
||||
|
||||
writel(reg, spi_imx->base + MXC_CSPICTRL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx,
|
||||
struct spi_imx_config *config)
|
||||
{
|
||||
unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
|
||||
int cs = spi_imx->chipselect[config->cs];
|
||||
|
||||
reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
|
||||
MX31_CSPICTRL_DR_SHIFT;
|
||||
|
||||
reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
|
||||
reg |= MX31_CSPICTRL_SSCTL;
|
||||
|
||||
if (config->mode & SPI_CPHA)
|
||||
reg |= MX31_CSPICTRL_PHA;
|
||||
if (config->mode & SPI_CPOL)
|
||||
reg |= MX31_CSPICTRL_POL;
|
||||
if (config->mode & SPI_CS_HIGH)
|
||||
reg |= MX31_CSPICTRL_SSPOL;
|
||||
if (cs < 0)
|
||||
reg |= (cs + 32) << MX35_CSPICTRL_CS_SHIFT;
|
||||
|
||||
writel(reg, spi_imx->base + MXC_CSPICTRL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused mx31_rx_available(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
|
||||
}
|
||||
|
||||
static void __maybe_unused spi_imx0_4_reset(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
/* drain receive buffer */
|
||||
while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR)
|
||||
readl(spi_imx->base + MXC_CSPIRXDATA);
|
||||
}
|
||||
|
||||
#define MX27_INTREG_RR (1 << 4)
|
||||
#define MX27_INTREG_TEEN (1 << 9)
|
||||
#define MX27_INTREG_RREN (1 << 13)
|
||||
|
||||
#define MX27_CSPICTRL_POL (1 << 5)
|
||||
#define MX27_CSPICTRL_PHA (1 << 6)
|
||||
#define MX27_CSPICTRL_SSPOL (1 << 8)
|
||||
#define MX27_CSPICTRL_XCH (1 << 9)
|
||||
#define MX27_CSPICTRL_ENABLE (1 << 10)
|
||||
#define MX27_CSPICTRL_MASTER (1 << 11)
|
||||
#define MX27_CSPICTRL_DR_SHIFT 14
|
||||
#define MX27_CSPICTRL_CS_SHIFT 19
|
||||
|
||||
static void __maybe_unused mx27_intctrl(struct spi_imx_data *spi_imx, int enable)
|
||||
{
|
||||
unsigned int val = 0;
|
||||
|
||||
if (enable & MXC_INT_TE)
|
||||
val |= MX27_INTREG_TEEN;
|
||||
if (enable & MXC_INT_RR)
|
||||
val |= MX27_INTREG_RREN;
|
||||
|
||||
writel(val, spi_imx->base + MXC_CSPIINT);
|
||||
}
|
||||
|
||||
static void __maybe_unused mx27_trigger(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
unsigned int reg;
|
||||
|
||||
reg = readl(spi_imx->base + MXC_CSPICTRL);
|
||||
reg |= MX27_CSPICTRL_XCH;
|
||||
writel(reg, spi_imx->base + MXC_CSPICTRL);
|
||||
}
|
||||
|
||||
static int __maybe_unused mx27_config(struct spi_imx_data *spi_imx,
|
||||
struct spi_imx_config *config)
|
||||
{
|
||||
unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER;
|
||||
int cs = spi_imx->chipselect[config->cs];
|
||||
|
||||
reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) <<
|
||||
MX27_CSPICTRL_DR_SHIFT;
|
||||
reg |= config->bpw - 1;
|
||||
|
||||
if (config->mode & SPI_CPHA)
|
||||
reg |= MX27_CSPICTRL_PHA;
|
||||
if (config->mode & SPI_CPOL)
|
||||
reg |= MX27_CSPICTRL_POL;
|
||||
if (config->mode & SPI_CS_HIGH)
|
||||
reg |= MX27_CSPICTRL_SSPOL;
|
||||
if (cs < 0)
|
||||
reg |= (cs + 32) << MX27_CSPICTRL_CS_SHIFT;
|
||||
|
||||
writel(reg, spi_imx->base + MXC_CSPICTRL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused mx27_rx_available(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR;
|
||||
}
|
||||
|
||||
static void __maybe_unused spi_imx0_0_reset(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
writel(1, spi_imx->base + MXC_RESET);
|
||||
}
|
||||
|
||||
#define MX1_INTREG_RR (1 << 3)
|
||||
#define MX1_INTREG_TEEN (1 << 8)
|
||||
#define MX1_INTREG_RREN (1 << 11)
|
||||
|
||||
#define MX1_CSPICTRL_POL (1 << 4)
|
||||
#define MX1_CSPICTRL_PHA (1 << 5)
|
||||
#define MX1_CSPICTRL_XCH (1 << 8)
|
||||
#define MX1_CSPICTRL_ENABLE (1 << 9)
|
||||
#define MX1_CSPICTRL_MASTER (1 << 10)
|
||||
#define MX1_CSPICTRL_DR_SHIFT 13
|
||||
|
||||
static void __maybe_unused mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
|
||||
{
|
||||
unsigned int val = 0;
|
||||
|
||||
if (enable & MXC_INT_TE)
|
||||
val |= MX1_INTREG_TEEN;
|
||||
if (enable & MXC_INT_RR)
|
||||
val |= MX1_INTREG_RREN;
|
||||
|
||||
writel(val, spi_imx->base + MXC_CSPIINT);
|
||||
}
|
||||
|
||||
static void __maybe_unused mx1_trigger(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
unsigned int reg;
|
||||
|
||||
reg = readl(spi_imx->base + MXC_CSPICTRL);
|
||||
reg |= MX1_CSPICTRL_XCH;
|
||||
writel(reg, spi_imx->base + MXC_CSPICTRL);
|
||||
}
|
||||
|
||||
static int __maybe_unused mx1_config(struct spi_imx_data *spi_imx,
|
||||
struct spi_imx_config *config)
|
||||
{
|
||||
unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
|
||||
|
||||
reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
|
||||
MX1_CSPICTRL_DR_SHIFT;
|
||||
reg |= config->bpw - 1;
|
||||
|
||||
if (config->mode & SPI_CPHA)
|
||||
reg |= MX1_CSPICTRL_PHA;
|
||||
if (config->mode & SPI_CPOL)
|
||||
reg |= MX1_CSPICTRL_POL;
|
||||
|
||||
writel(reg, spi_imx->base + MXC_CSPICTRL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused mx1_rx_available(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
|
||||
}
|
||||
|
||||
static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
writel(1, spi_imx->base + MXC_RESET);
|
||||
}
|
||||
|
||||
/*
|
||||
* These version numbers are taken from the Freescale driver. Unfortunately it
|
||||
* doesn't support i.MX1, so this entry doesn't match the scheme. :-(
|
||||
*/
|
||||
static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
|
||||
#ifdef CONFIG_SPI_IMX_VER_IMX1
|
||||
[SPI_IMX_VER_IMX1] = {
|
||||
.intctrl = mx1_intctrl,
|
||||
.config = mx1_config,
|
||||
.trigger = mx1_trigger,
|
||||
.rx_available = mx1_rx_available,
|
||||
.reset = mx1_reset,
|
||||
.fifosize = 8,
|
||||
},
|
||||
#endif
|
||||
#ifdef CONFIG_SPI_IMX_VER_0_0
|
||||
[SPI_IMX_VER_0_0] = {
|
||||
.intctrl = mx27_intctrl,
|
||||
.config = mx27_config,
|
||||
.trigger = mx27_trigger,
|
||||
.rx_available = mx27_rx_available,
|
||||
.reset = spi_imx0_0_reset,
|
||||
.fifosize = 8,
|
||||
},
|
||||
#endif
|
||||
#ifdef CONFIG_SPI_IMX_VER_0_4
|
||||
[SPI_IMX_VER_0_4] = {
|
||||
.intctrl = mx31_intctrl,
|
||||
.config = spi_imx0_4_config,
|
||||
.trigger = mx31_trigger,
|
||||
.rx_available = mx31_rx_available,
|
||||
.reset = spi_imx0_4_reset,
|
||||
.fifosize = 8,
|
||||
},
|
||||
#endif
|
||||
#ifdef CONFIG_SPI_IMX_VER_0_7
|
||||
[SPI_IMX_VER_0_7] = {
|
||||
.intctrl = mx31_intctrl,
|
||||
.config = spi_imx0_7_config,
|
||||
.trigger = mx31_trigger,
|
||||
.rx_available = mx31_rx_available,
|
||||
.reset = spi_imx0_4_reset,
|
||||
.fifosize = 8,
|
||||
},
|
||||
#endif
|
||||
#ifdef CONFIG_SPI_IMX_VER_2_3
|
||||
[SPI_IMX_VER_2_3] = {
|
||||
.intctrl = spi_imx2_3_intctrl,
|
||||
.config = spi_imx2_3_config,
|
||||
.trigger = spi_imx2_3_trigger,
|
||||
.rx_available = spi_imx2_3_rx_available,
|
||||
.reset = spi_imx2_3_reset,
|
||||
.fifosize = 64,
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
static void spi_imx_chipselect(struct spi_device *spi, int is_active)
|
||||
{
|
||||
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
|
||||
int gpio = spi_imx->chipselect[spi->chip_select];
|
||||
int active = is_active != BITBANG_CS_INACTIVE;
|
||||
int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
|
||||
|
||||
if (gpio < 0)
|
||||
return;
|
||||
|
||||
gpio_set_value(gpio, dev_is_lowactive ^ active);
|
||||
}
|
||||
|
||||
static void spi_imx_push(struct spi_imx_data *spi_imx)
|
||||
{
|
||||
while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) {
|
||||
if (!spi_imx->count)
|
||||
break;
|
||||
spi_imx->tx(spi_imx);
|
||||
spi_imx->txfifo++;
|
||||
}
|
||||
|
||||
spi_imx->devtype_data.trigger(spi_imx);
|
||||
}
|
||||
|
||||
static irqreturn_t spi_imx_isr(int irq, void *dev_id)
|
||||
{
|
||||
struct spi_imx_data *spi_imx = dev_id;
|
||||
|
||||
while (spi_imx->devtype_data.rx_available(spi_imx)) {
|
||||
spi_imx->rx(spi_imx);
|
||||
spi_imx->txfifo--;
|
||||
}
|
||||
|
||||
if (spi_imx->count) {
|
||||
spi_imx_push(spi_imx);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
if (spi_imx->txfifo) {
|
||||
/* No data left to push, but still waiting for rx data,
|
||||
* enable receive data available interrupt.
|
||||
*/
|
||||
spi_imx->devtype_data.intctrl(
|
||||
spi_imx, MXC_INT_RR);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
spi_imx->devtype_data.intctrl(spi_imx, 0);
|
||||
complete(&spi_imx->xfer_done);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int spi_imx_setupxfer(struct spi_device *spi,
|
||||
struct spi_transfer *t)
|
||||
{
|
||||
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
|
||||
struct spi_imx_config config;
|
||||
|
||||
config.bpw = t ? t->bits_per_word : spi->bits_per_word;
|
||||
config.speed_hz = t ? t->speed_hz : spi->max_speed_hz;
|
||||
config.mode = spi->mode;
|
||||
config.cs = spi->chip_select;
|
||||
|
||||
if (!config.speed_hz)
|
||||
config.speed_hz = spi->max_speed_hz;
|
||||
if (!config.bpw)
|
||||
config.bpw = spi->bits_per_word;
|
||||
if (!config.speed_hz)
|
||||
config.speed_hz = spi->max_speed_hz;
|
||||
|
||||
/* Initialize the functions for transfer */
|
||||
if (config.bpw <= 8) {
|
||||
spi_imx->rx = spi_imx_buf_rx_u8;
|
||||
spi_imx->tx = spi_imx_buf_tx_u8;
|
||||
} else if (config.bpw <= 16) {
|
||||
spi_imx->rx = spi_imx_buf_rx_u16;
|
||||
spi_imx->tx = spi_imx_buf_tx_u16;
|
||||
} else if (config.bpw <= 32) {
|
||||
spi_imx->rx = spi_imx_buf_rx_u32;
|
||||
spi_imx->tx = spi_imx_buf_tx_u32;
|
||||
} else
|
||||
BUG();
|
||||
|
||||
spi_imx->devtype_data.config(spi_imx, &config);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int spi_imx_transfer(struct spi_device *spi,
|
||||
struct spi_transfer *transfer)
|
||||
{
|
||||
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
|
||||
|
||||
spi_imx->tx_buf = transfer->tx_buf;
|
||||
spi_imx->rx_buf = transfer->rx_buf;
|
||||
spi_imx->count = transfer->len;
|
||||
spi_imx->txfifo = 0;
|
||||
|
||||
init_completion(&spi_imx->xfer_done);
|
||||
|
||||
spi_imx_push(spi_imx);
|
||||
|
||||
spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE);
|
||||
|
||||
wait_for_completion(&spi_imx->xfer_done);
|
||||
|
||||
return transfer->len;
|
||||
}
|
||||
|
||||
static int spi_imx_setup(struct spi_device *spi)
|
||||
{
|
||||
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
|
||||
int gpio = spi_imx->chipselect[spi->chip_select];
|
||||
|
||||
dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
|
||||
spi->mode, spi->bits_per_word, spi->max_speed_hz);
|
||||
|
||||
if (gpio >= 0)
|
||||
gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
|
||||
|
||||
spi_imx_chipselect(spi, BITBANG_CS_INACTIVE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void spi_imx_cleanup(struct spi_device *spi)
|
||||
{
|
||||
}
|
||||
|
||||
static struct platform_device_id spi_imx_devtype[] = {
|
||||
{
|
||||
.name = "imx1-cspi",
|
||||
.driver_data = SPI_IMX_VER_IMX1,
|
||||
}, {
|
||||
.name = "imx21-cspi",
|
||||
.driver_data = SPI_IMX_VER_0_0,
|
||||
}, {
|
||||
.name = "imx25-cspi",
|
||||
.driver_data = SPI_IMX_VER_0_7,
|
||||
}, {
|
||||
.name = "imx27-cspi",
|
||||
.driver_data = SPI_IMX_VER_0_0,
|
||||
}, {
|
||||
.name = "imx31-cspi",
|
||||
.driver_data = SPI_IMX_VER_0_4,
|
||||
}, {
|
||||
.name = "imx35-cspi",
|
||||
.driver_data = SPI_IMX_VER_0_7,
|
||||
}, {
|
||||
.name = "imx51-cspi",
|
||||
.driver_data = SPI_IMX_VER_0_7,
|
||||
}, {
|
||||
.name = "imx51-ecspi",
|
||||
.driver_data = SPI_IMX_VER_2_3,
|
||||
}, {
|
||||
.name = "imx53-cspi",
|
||||
.driver_data = SPI_IMX_VER_0_7,
|
||||
}, {
|
||||
.name = "imx53-ecspi",
|
||||
.driver_data = SPI_IMX_VER_2_3,
|
||||
}, {
|
||||
/* sentinel */
|
||||
}
|
||||
};
|
||||
|
||||
static int __devinit spi_imx_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct spi_imx_master *mxc_platform_info;
|
||||
struct spi_master *master;
|
||||
struct spi_imx_data *spi_imx;
|
||||
struct resource *res;
|
||||
int i, ret;
|
||||
|
||||
mxc_platform_info = dev_get_platdata(&pdev->dev);
|
||||
if (!mxc_platform_info) {
|
||||
dev_err(&pdev->dev, "can't get the platform data\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data));
|
||||
if (!master)
|
||||
return -ENOMEM;
|
||||
|
||||
platform_set_drvdata(pdev, master);
|
||||
|
||||
master->bus_num = pdev->id;
|
||||
master->num_chipselect = mxc_platform_info->num_chipselect;
|
||||
|
||||
spi_imx = spi_master_get_devdata(master);
|
||||
spi_imx->bitbang.master = spi_master_get(master);
|
||||
spi_imx->chipselect = mxc_platform_info->chipselect;
|
||||
|
||||
for (i = 0; i < master->num_chipselect; i++) {
|
||||
if (spi_imx->chipselect[i] < 0)
|
||||
continue;
|
||||
ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
|
||||
if (ret) {
|
||||
while (i > 0) {
|
||||
i--;
|
||||
if (spi_imx->chipselect[i] >= 0)
|
||||
gpio_free(spi_imx->chipselect[i]);
|
||||
}
|
||||
dev_err(&pdev->dev, "can't get cs gpios\n");
|
||||
goto out_master_put;
|
||||
}
|
||||
}
|
||||
|
||||
spi_imx->bitbang.chipselect = spi_imx_chipselect;
|
||||
spi_imx->bitbang.setup_transfer = spi_imx_setupxfer;
|
||||
spi_imx->bitbang.txrx_bufs = spi_imx_transfer;
|
||||
spi_imx->bitbang.master->setup = spi_imx_setup;
|
||||
spi_imx->bitbang.master->cleanup = spi_imx_cleanup;
|
||||
spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
|
||||
|
||||
init_completion(&spi_imx->xfer_done);
|
||||
|
||||
spi_imx->devtype_data =
|
||||
spi_imx_devtype_data[pdev->id_entry->driver_data];
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!res) {
|
||||
dev_err(&pdev->dev, "can't get platform resource\n");
|
||||
ret = -ENOMEM;
|
||||
goto out_gpio_free;
|
||||
}
|
||||
|
||||
if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
|
||||
dev_err(&pdev->dev, "request_mem_region failed\n");
|
||||
ret = -EBUSY;
|
||||
goto out_gpio_free;
|
||||
}
|
||||
|
||||
spi_imx->base = ioremap(res->start, resource_size(res));
|
||||
if (!spi_imx->base) {
|
||||
ret = -EINVAL;
|
||||
goto out_release_mem;
|
||||
}
|
||||
|
||||
spi_imx->irq = platform_get_irq(pdev, 0);
|
||||
if (spi_imx->irq < 0) {
|
||||
ret = -EINVAL;
|
||||
goto out_iounmap;
|
||||
}
|
||||
|
||||
ret = request_irq(spi_imx->irq, spi_imx_isr, 0, DRIVER_NAME, spi_imx);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "can't get irq%d: %d\n", spi_imx->irq, ret);
|
||||
goto out_iounmap;
|
||||
}
|
||||
|
||||
spi_imx->clk = clk_get(&pdev->dev, NULL);
|
||||
if (IS_ERR(spi_imx->clk)) {
|
||||
dev_err(&pdev->dev, "unable to get clock\n");
|
||||
ret = PTR_ERR(spi_imx->clk);
|
||||
goto out_free_irq;
|
||||
}
|
||||
|
||||
clk_enable(spi_imx->clk);
|
||||
spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
|
||||
|
||||
spi_imx->devtype_data.reset(spi_imx);
|
||||
|
||||
spi_imx->devtype_data.intctrl(spi_imx, 0);
|
||||
|
||||
ret = spi_bitbang_start(&spi_imx->bitbang);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
|
||||
goto out_clk_put;
|
||||
}
|
||||
|
||||
dev_info(&pdev->dev, "probed\n");
|
||||
|
||||
return ret;
|
||||
|
||||
out_clk_put:
|
||||
clk_disable(spi_imx->clk);
|
||||
clk_put(spi_imx->clk);
|
||||
out_free_irq:
|
||||
free_irq(spi_imx->irq, spi_imx);
|
||||
out_iounmap:
|
||||
iounmap(spi_imx->base);
|
||||
out_release_mem:
|
||||
release_mem_region(res->start, resource_size(res));
|
||||
out_gpio_free:
|
||||
for (i = 0; i < master->num_chipselect; i++)
|
||||
if (spi_imx->chipselect[i] >= 0)
|
||||
gpio_free(spi_imx->chipselect[i]);
|
||||
out_master_put:
|
||||
spi_master_put(master);
|
||||
kfree(master);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit spi_imx_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct spi_master *master = platform_get_drvdata(pdev);
|
||||
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
|
||||
int i;
|
||||
|
||||
spi_bitbang_stop(&spi_imx->bitbang);
|
||||
|
||||
writel(0, spi_imx->base + MXC_CSPICTRL);
|
||||
clk_disable(spi_imx->clk);
|
||||
clk_put(spi_imx->clk);
|
||||
free_irq(spi_imx->irq, spi_imx);
|
||||
iounmap(spi_imx->base);
|
||||
|
||||
for (i = 0; i < master->num_chipselect; i++)
|
||||
if (spi_imx->chipselect[i] >= 0)
|
||||
gpio_free(spi_imx->chipselect[i]);
|
||||
|
||||
spi_master_put(master);
|
||||
|
||||
release_mem_region(res->start, resource_size(res));
|
||||
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver spi_imx_driver = {
|
||||
.driver = {
|
||||
.name = DRIVER_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.id_table = spi_imx_devtype,
|
||||
.probe = spi_imx_probe,
|
||||
.remove = __devexit_p(spi_imx_remove),
|
||||
};
|
||||
|
||||
static int __init spi_imx_init(void)
|
||||
{
|
||||
return platform_driver_register(&spi_imx_driver);
|
||||
}
|
||||
|
||||
static void __exit spi_imx_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&spi_imx_driver);
|
||||
}
|
||||
|
||||
module_init(spi_imx_init);
|
||||
module_exit(spi_imx_exit);
|
||||
|
||||
MODULE_DESCRIPTION("SPI Master Controller driver");
|
||||
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
|
||||
MODULE_LICENSE("GPL");
|
||||
Reference in New Issue
Block a user