Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-core.c
	drivers/net/wireless/rt2x00/rt2x00queue.c
	drivers/net/wireless/rt2x00/rt2x00queue.h

include/linux/nl80211.h

@@ -410,6 +410,16 @@
  *	notification. This event is used to indicate that an unprotected
  *	disassociation frame was dropped when MFP is in use.
  *
+ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
+ *      beacon or probe response from a compatible mesh peer.  This is only
+ *      sent while no station information (sta_info) exists for the new peer
+ *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set.  On
+ *      reception of this notification, userspace may decide to create a new
+ *      station (@NL80211_CMD_NEW_STATION).  To stop this notification from
+ *      reoccurring, the userspace authentication daemon may want to create the
+ *      new station with the AUTHENTICATED flag unset and maybe change it later
+ *      depending on the authentication result.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -522,6 +532,8 @@ enum nl80211_commands {
 	NL80211_CMD_UNPROT_DEAUTHENTICATE,
 	NL80211_CMD_UNPROT_DISASSOCIATE,
 
+	NL80211_CMD_NEW_PEER_CANDIDATE,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -545,6 +557,7 @@ enum nl80211_commands {
 /* source-level API compatibility */
 #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
 #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
+#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
 
 /**
  * enum nl80211_attrs - nl80211 netlink attributes
@@ -886,6 +899,9 @@ enum nl80211_commands {
  *	changed once the mesh is active.
  * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
  *	containing attributes from &enum nl80211_meshconf_params.
+ * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
+ *	allows auth frames in a mesh to be passed to userspace for processing via
+ *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
  *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1074,6 +1090,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
 	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
 
+	NL80211_ATTR_SUPPORT_MESH_AUTH,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -1168,6 +1186,7 @@ enum nl80211_iftype {
  *	with short barker preamble
  * @NL80211_STA_FLAG_WME: station is WME/QoS capable
  * @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
  * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
  * @__NL80211_STA_FLAG_AFTER_LAST: internal use
  */
@@ -1177,6 +1196,7 @@ enum nl80211_sta_flags {
 	NL80211_STA_FLAG_SHORT_PREAMBLE,
 	NL80211_STA_FLAG_WME,
 	NL80211_STA_FLAG_MFP,
+	NL80211_STA_FLAG_AUTHENTICATED,
 
 	/* keep last */
 	__NL80211_STA_FLAG_AFTER_LAST,
@@ -1277,6 +1297,7 @@ enum nl80211_sta_bss_param {
  *	attribute, like NL80211_STA_INFO_TX_BITRATE.
  * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
  *     containing info as possible, see &enum nl80211_sta_bss_param
+ * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -1297,6 +1318,7 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_SIGNAL_AVG,
 	NL80211_STA_INFO_RX_BITRATE,
 	NL80211_STA_INFO_BSS_PARAM,
+	NL80211_STA_INFO_CONNECTED_TIME,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -1719,9 +1741,12 @@ enum nl80211_meshconf_params {
  * vendor specific path metric or disable it to use the default Airtime
  * metric.
  *
- * @NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE: A vendor specific information
- * element that vendors will use to identify the path selection methods and
- * metrics in use.
+ * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
+ * robust security network ie, or a vendor specific information element that
+ * vendors will use to identify the path selection methods and metrics in use.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
+ * daemon will be authenticating mesh candidates.
  *
  * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
@@ -1730,7 +1755,8 @@ enum nl80211_mesh_setup_params {
 	__NL80211_MESH_SETUP_INVALID,
 	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
 	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
-	NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE,
+	NL80211_MESH_SETUP_IE,
+	NL80211_MESH_SETUP_USERSPACE_AUTH,
 
 	/* keep last */
 	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,