regmap-i2c: Use i2c block command only if register value width is 8 bit

Chips with 16-bit registers don't usually work well with I2C block
commands. For example, neither the LM75 datasheet nor the TMP102 datasheet
mentions block command support, and in fact it does not work for any of
those chips. Also, it is not clear how the block command would handle
16-bit SMBus operations in the fist place, since the data format associated
with those commands is either little endian or big endian, which requires
some kind of conversion to or from host byte order.

Only use i2c block commands if both register and value width is 8 bit.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Guenter Roeck 2016-06-21 11:04:23 -07:00 committed by Mark Brown
parent 1a695a905c
commit d4ef930638

View File

@ -259,7 +259,7 @@ static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
{
if (i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C))
return &regmap_i2c;
else if (config->reg_bits == 8 &&
else if (config->val_bits == 8 && config->reg_bits == 8 &&
i2c_check_functionality(i2c->adapter,
I2C_FUNC_SMBUS_I2C_BLOCK))
return &regmap_i2c_smbus_i2c_block;