x86: Move ioapic_ids_setup to x86_init_ops

32bit and also the numaq code have special requirements on the
ioapic_id setup. Convert it to a x86_init_ops function and get rid
of the quirks and #ifdefs

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

arch/x86/include/asm/io_apic.h

@@ -177,12 +177,13 @@ extern int setup_ioapic_entry(int apic, int irq,
 			      int polarity, int vector, int pin);
 extern void ioapic_write_entry(int apic, int pin,
 			       struct IO_APIC_route_entry e);
+extern void setup_ioapic_ids_from_mpc(void);
 #else  /* !CONFIG_X86_IO_APIC */
 #define io_apic_assign_pci_irqs 0
+#define setup_ioapic_ids_from_mpc x86_init_noop
 static const int timer_through_8259 = 0;
 static inline void ioapic_init_mappings(void)	{ }
 static inline void ioapic_insert_resources(void) { }
-
 static inline void probe_nr_irqs_gsi(void)	{ }
 #endif
 

arch/x86/include/asm/setup.h

@@ -30,7 +30,6 @@ struct x86_quirks {
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
 	void (*smp_read_mpc_oem)(struct mpc_oemtable *oemtable,
 				unsigned short oemsize);
-	int (*setup_ioapic_ids)(void);
 };
 
 extern void x86_quirk_intr_init(void);

arch/x86/include/asm/x86_init.h

@@ -4,9 +4,11 @@
 /**
  * struct x86_init_mpparse - platform specific mpparse ops
  * @mpc_record:			platform specific mpc record accounting
+ * @setup_ioapic_ids:		platform specific ioapic id override
  */
 struct x86_init_mpparse {
 	void (*mpc_record)(unsigned int mode);
+	void (*setup_ioapic_ids)(void);
 };
 
 /**

arch/x86/kernel/apic/io_apic.c

@@ -2014,7 +2014,7 @@ void disable_IO_APIC(void)
  * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
  */
 
-static void __init setup_ioapic_ids_from_mpc(void)
+void __init setup_ioapic_ids_from_mpc(void)
 {
 	union IO_APIC_reg_00 reg_00;
 	physid_mask_t phys_id_present_map;
@@ -2023,9 +2023,8 @@ static void __init setup_ioapic_ids_from_mpc(void)
 	unsigned char old_id;
 	unsigned long flags;
 
-	if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids())
+	if (acpi_ioapic)
 		return;
-
 	/*
 	 * Don't check I/O APIC IDs for xAPIC systems.  They have
 	 * no meaning without the serial APIC bus.
@@ -3061,10 +3060,8 @@ void __init setup_IO_APIC(void)
 	/*
          * Set up IO-APIC IRQ routing.
          */
-#ifdef CONFIG_X86_32
+	x86_init.mpparse.setup_ioapic_ids();
-	if (!acpi_ioapic)
+
-		setup_ioapic_ids_from_mpc();
-#endif
 	sync_Arb_IDs();
 	setup_IO_APIC_irqs();
 	init_IO_APIC_traps();

arch/x86/kernel/apic/numaq_32.c

@@ -262,12 +262,6 @@ static void __init
 	}
 }
 
-static int __init numaq_setup_ioapic_ids(void)
-{
-	/* so can skip it */
-	return 1;
-}
-
 static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_pre_time_init		= numaq_pre_time_init,
 	.arch_time_init			= NULL,
@@ -280,7 +274,6 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.mpc_oem_bus_info		= mpc_oem_bus_info,
 	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
 	.smp_read_mpc_oem		= smp_read_mpc_oem,
-	.setup_ioapic_ids		= numaq_setup_ioapic_ids,
 };
 
 static __init void early_check_numaq(void)
@@ -299,6 +292,7 @@ static __init void early_check_numaq(void)
 	if (found_numaq) {
 		x86_quirks = &numaq_x86_quirks;
 		x86_init.mpparse.mpc_record = numaq_mpc_record;
+		x86_init.mpparse.setup_ioapic_ids = x86_init_noop;
 	}
 }
 

arch/x86/kernel/head32.c

@@ -13,6 +13,8 @@
 #include <asm/e820.h>
 #include <asm/page.h>
 #include <asm/trampoline.h>
+#include <asm/apic.h>
+#include <asm/io_apic.h>
 
 void __init i386_start_kernel(void)
 {
@@ -32,6 +34,7 @@ void __init i386_start_kernel(void)
 	/* Initilize 32bit specific setup functions */
 	x86_init.resources.probe_roms = probe_roms;
 	x86_init.resources.reserve_resources = i386_reserve_resources;
+	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
 
 	x86_init.resources.reserve_ebda_region();
 

arch/x86/kernel/x86_init.c

@@ -27,5 +27,6 @@ struct __initdata x86_init_ops x86_init = {
 
 	.mpparse = {
 		.mpc_record		= x86_init_uint_noop,
+		.setup_ioapic_ids	= x86_init_noop,
 	},
 };