ASoC: fix kconfig order of Blackfin drivers

Some of the Blackfin options don't directly follow the kconfig options
they depend on, so kconfig is unable to display the proper tree.  So sort
the options such they expand/collapse properly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Barry Song 2009-10-01 01:33:30 -04:00 committed by Mark Brown
parent 539d3d8cbe
commit df1246d84a

View File

@ -7,15 +7,6 @@ config SND_BF5XX_I2S
mode (supports single stereo In/Out).
You will also need to select the audio interfaces to support below.
config SND_BF5XX_TDM
tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
depends on (BLACKFIN && SND_SOC)
help
Say Y or M if you want to add support for codecs attached to
the Blackfin SPORT (synchronous serial ports) interface in TDM
mode.
You will also need to select the audio interfaces to support below.
config SND_BF5XX_SOC_SSM2602
tristate "SoC SSM2602 Audio support for BF52x ezkit"
depends on SND_BF5XX_I2S
@ -41,6 +32,31 @@ config SND_BFIN_AD73311_SE
Enter the GPIO used to control AD73311's SE pin. Acceptable
values are 0 to 7
config SND_BF5XX_TDM
tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
depends on (BLACKFIN && SND_SOC)
help
Say Y or M if you want to add support for codecs attached to
the Blackfin SPORT (synchronous serial ports) interface in TDM
mode.
You will also need to select the audio interfaces to support below.
config SND_BF5XX_SOC_AD1836
tristate "SoC AD1836 Audio support for BF5xx"
depends on SND_BF5XX_TDM
select SND_BF5XX_SOC_TDM
select SND_SOC_AD1836
help
Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
config SND_BF5XX_SOC_AD1938
tristate "SoC AD1938 Audio support for Blackfin"
depends on SND_BF5XX_TDM
select SND_BF5XX_SOC_TDM
select SND_SOC_AD1938
help
Say Y if you want to add support for AD1938 codec on Blackfin.
config SND_BF5XX_AC97
tristate "SoC AC97 Audio for the ADI BF5xx chip"
depends on BLACKFIN
@ -71,6 +87,30 @@ config SND_BF5XX_MULTICHAN_SUPPORT
Say y if you want AC97 driver to support up to 5.1 channel audio.
this mode will consume much more memory for DMA.
config SND_BF5XX_HAVE_COLD_RESET
bool "BOARD has COLD Reset GPIO"
depends on SND_BF5XX_AC97
default y if BFIN548_EZKIT
default n if !BFIN548_EZKIT
config SND_BF5XX_RESET_GPIO_NUM
int "Set a GPIO for cold reset"
depends on SND_BF5XX_HAVE_COLD_RESET
range 0 159
default 19 if BFIN548_EZKIT
default 5 if BFIN537_STAMP
default 0
help
Set the correct GPIO for RESET the sound chip.
config SND_BF5XX_SOC_AD1980
tristate "SoC AD1980/1 Audio support for BF5xx"
depends on SND_BF5XX_AC97
select SND_BF5XX_SOC_AC97
select SND_SOC_AD1980
help
Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
config SND_BF5XX_SOC_SPORT
tristate
@ -88,30 +128,6 @@ config SND_BF5XX_SOC_AC97
select SND_SOC_AC97_BUS
select SND_BF5XX_SOC_SPORT
config SND_BF5XX_SOC_AD1836
tristate "SoC AD1836 Audio support for BF5xx"
depends on SND_BF5XX_TDM
select SND_BF5XX_SOC_TDM
select SND_SOC_AD1836
help
Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
config SND_BF5XX_SOC_AD1980
tristate "SoC AD1980/1 Audio support for BF5xx"
depends on SND_BF5XX_AC97
select SND_BF5XX_SOC_AC97
select SND_SOC_AD1980
help
Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
config SND_BF5XX_SOC_AD1938
tristate "SoC AD1938 Audio support for Blackfin"
depends on SND_BF5XX_TDM
select SND_BF5XX_SOC_TDM
select SND_SOC_AD1938
help
Say Y if you want to add support for AD1938 codec on Blackfin.
config SND_BF5XX_SPORT_NUM
int "Set a SPORT for Sound chip"
depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM)
@ -120,19 +136,3 @@ config SND_BF5XX_SPORT_NUM
default 0
help
Set the correct SPORT for sound chip.
config SND_BF5XX_HAVE_COLD_RESET
bool "BOARD has COLD Reset GPIO"
depends on SND_BF5XX_AC97
default y if BFIN548_EZKIT
default n if !BFIN548_EZKIT
config SND_BF5XX_RESET_GPIO_NUM
int "Set a GPIO for cold reset"
depends on SND_BF5XX_HAVE_COLD_RESET
range 0 159
default 19 if BFIN548_EZKIT
default 5 if BFIN537_STAMP
default 0
help
Set the correct GPIO for RESET the sound chip.