ARM: OMAP1: Misc clean-up

This patch cleans up omap1 files to sync up with linux-omap tree:

- Remove omap-generic MMC config as it should be defined in board-*.c files
  instead of using board-generic.c
- New style I2C board_info from David Brownell <dbrownell@users.sourceforge.net>
- Init section fixes from Dirk Behme <dirk.behme@googlemail.com>

Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/board-generic.c

@@ -55,33 +55,14 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
 	.hmc_mode	= 16,
 	.pins[0]	= 6,
 };
-
-static struct omap_mmc_config generic_mmc_config __initdata = {
-	.mmc [0] = {
-		.enabled 	= 0,
-		.wire4		= 0,
-		.wp_pin		= -1,
-		.power_pin	= -1,
-		.switch_pin	= -1,
-	},
-	.mmc [1] = {
-		.enabled 	= 0,
-		.wire4		= 0,
-		.wp_pin		= -1,
-		.power_pin	= -1,
-		.switch_pin	= -1,
-	},
-};
-
 #endif
 
 static struct omap_uart_config generic_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
-static struct omap_board_config_kernel generic_config[] = {
+static struct omap_board_config_kernel generic_config[] __initdata = {
-	{ OMAP_TAG_USB,           NULL },
+	{ OMAP_TAG_USB,		NULL },
-	{ OMAP_TAG_MMC,           &generic_mmc_config },
 	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 

arch/arm/mach-omap1/board-h2.c

@@ -37,6 +37,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
+#include <asm/arch/gpio-switch.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/nand.h>
@@ -47,8 +48,6 @@
 #include <asm/arch/mcbsp.h>
 #include <asm/arch/omap-alsa.h>
 
-extern int omap_gpio_init(void);
-
 static int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -341,22 +340,6 @@ static struct platform_device *h2_devices[] __initdata = {
 	&h2_mcbsp1_device,
 };
 
-#ifdef CONFIG_I2C_BOARDINFO
-static struct i2c_board_info __initdata h2_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65010", 0x48),
-		.type		= "tps65010",
-		.irq		= OMAP_GPIO_IRQ(58),
-	},
-	/* TODO when driver support is ready:
-	 *  - isp1301 OTG transceiver
-	 *  - optional ov9640 camera sensor at 0x30
-	 *  - pcf9754 for aGPS control
-	 *  - ... etc
-	 */
-};
-#endif
-
 static void __init h2_init_smc91x(void)
 {
 	if ((omap_request_gpio(0)) < 0) {
@@ -365,6 +348,14 @@ static void __init h2_init_smc91x(void)
 	}
 }
 
+static struct i2c_board_info __initdata h2_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("isp1301_omap", 0x2d),
+		.type		= "isp1301_omap",
+		.irq		= OMAP_GPIO_IRQ(2),
+	},
+};
+
 static void __init h2_init_irq(void)
 {
 	omap1_init_common_hw();
@@ -461,11 +452,6 @@ static void __init h2_init(void)
 	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
 			      ARRAY_SIZE(h2_i2c_board_info));
 	h2_mmc_init();
-
-	/* irq for tps65010 chip */
-	omap_cfg_reg(W4_GPIO58);
-	if (gpio_request(58, "tps65010") == 0)
-		gpio_direction_input(58);
 }
 
 static void __init h2_map_io(void)
@@ -473,22 +459,6 @@ static void __init h2_map_io(void)
 	omap1_map_common_io();
 }
 
-#ifdef CONFIG_TPS65010
-static int __init h2_tps_init(void)
-{
-	if (!machine_is_omap_h2())
-		return 0;
-
-	/* gpio3 for SD, gpio4 for VDD_DSP */
-	/* FIXME send power to DSP iff it's configured */
-
-	/* Enable LOW_PWR */
-	tps65010_set_low_pwr(ON);
-	return 0;
-}
-fs_initcall(h2_tps_init);
-#endif
-
 MACHINE_START(OMAP_H2, "TI-H2")
 	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
 	.phys_io	= 0xfff00000,

arch/arm/mach-omap1/board-h3.c

@@ -51,8 +51,6 @@
 #include <asm/arch/mcbsp.h>
 #include <asm/arch/omap-alsa.h>
 
-extern int omap_gpio_init(void);
-
 static int h3_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -452,26 +450,13 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel h3_config[] = {
+static struct omap_board_config_kernel h3_config[] __initdata = {
 	{ OMAP_TAG_USB,		&h3_usb_config },
 	{ OMAP_TAG_MMC,		&h3_mmc_config },
 	{ OMAP_TAG_UART,	&h3_uart_config },
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 
-static struct i2c_board_info __initdata h3_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65010", 0x48),
-		.type		= "tps65013",
-		/* .irq		= OMAP_GPIO_IRQ(??), */
-	},
-	/* TODO when driver support is ready:
-	 *  - isp1301 OTG transceiver
-	 *  - optional ov9640 camera sensor at 0x30
-	 *  - ...
-	 */
-};
-
 static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
 	{
 		.name			= "mmc_slot",
@@ -514,6 +499,8 @@ static void __init h3_init(void)
 	omap_cfg_reg(V2_1710_GPIO10);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	spi_register_board_info(h3_spi_board_info,
+				ARRAY_SIZE(h3_spi_board_info));
 	omap_board_config = h3_config;
 	omap_board_config_size = ARRAY_SIZE(h3_config);
 	omap_serial_init();
@@ -544,23 +531,6 @@ static void __init h3_map_io(void)
 	omap1_map_common_io();
 }
 
-#ifdef CONFIG_TPS65010
-static int __init h3_tps_init(void)
-{
-	if (!machine_is_omap_h3())
-		return 0;
-
-	/* gpio4 for SD, gpio3 for VDD_DSP */
-	/* FIXME send power to DSP iff it's configured */
-
-	/* Enable LOW_PWR */
-	tps65013_set_low_pwr(ON);
-
-	return 0;
-}
-fs_initcall(h3_tps_init);
-#endif
-
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	/* Maintainer: Texas Instruments, Inc. */
 	.phys_io	= 0xfff00000,

arch/arm/mach-omap1/board-nokia770.c

@@ -189,7 +189,7 @@ static struct omap_mmc_config nokia770_mmc_config __initdata = {
 	},
 };
 
-static struct omap_board_config_kernel nokia770_config[] = {
+static struct omap_board_config_kernel nokia770_config[] __initdata = {
 	{ OMAP_TAG_USB,		NULL },
 	{ OMAP_TAG_MMC,		&nokia770_mmc_config },
 };

arch/arm/mach-omap1/board-osk.c

@@ -253,7 +253,7 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
 };
 #endif
 
-static struct omap_board_config_kernel osk_config[] = {
+static struct omap_board_config_kernel osk_config[] __initdata = {
 	{ OMAP_TAG_USB,           &osk_usb_config },
 	{ OMAP_TAG_UART,		&osk_uart_config },
 #ifdef	CONFIG_OMAP_OSK_MISTRAL

arch/arm/mach-omap1/board-palmtt.c

@@ -312,7 +312,7 @@ static struct omap_uart_config palmtt_uart_config __initdata = {
 	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
 };
 
-static struct omap_board_config_kernel palmtt_config[] = {
+static struct omap_board_config_kernel palmtt_config[] __initdata = {
 	{ OMAP_TAG_USB,		&palmtt_usb_config	},
 	{ OMAP_TAG_LCD,		&palmtt_lcd_config	},
 	{ OMAP_TAG_UART,	&palmtt_uart_config	},

arch/arm/mach-omap1/board-palmz71.c

@@ -285,7 +285,7 @@ static struct omap_uart_config palmz71_uart_config __initdata = {
 	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
 };
 
-static struct omap_board_config_kernel palmz71_config[] = {
+static struct omap_board_config_kernel palmz71_config[] __initdata = {
 	{OMAP_TAG_USB,	&palmz71_usb_config},
 	{OMAP_TAG_MMC,	&palmz71_mmc_config},
 	{OMAP_TAG_LCD,	&palmz71_lcd_config},

arch/arm/mach-omap1/board-perseus2.c

@@ -216,7 +216,7 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel perseus2_config[] = {
+static struct omap_board_config_kernel perseus2_config[] __initdata = {
 	{ OMAP_TAG_UART,	&perseus2_uart_config },
 	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
 };

arch/arm/mach-omap1/board-sx1.c

@@ -268,21 +268,6 @@ static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
 						/* PCR0 =0f0f */
 };
 
-/* TODO: PCM interface - McBSP2 */
-static struct omap_mcbsp_reg_cfg mcbsp2_regs = {
-	.spcr2	= FRST | GRST | XRST | XINTM(3),	/* SPCR2=F1 */
-	.spcr1	= RINTM(3) | RRST,	/* SPCR1=30 */
-	.rcr2	= 0,	/* RCR2 =00 */
-	.rcr1	= RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1 = 140 */
-	.xcr2	= 0,	/* XCR2 = 0 */
-	.xcr1	= XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */
-	.srgr1	= FWID(15) | CLKGDV(12),	/* SRGR1=0f0c */
-	.srgr2	= FSGM | FPER(31),	/* SRGR2=101f */
-	.pcr0	= FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-						/* PCR0=0f0f */
-	/* mcbsp: slave */
-};
-
 static struct omap_alsa_codec_config sx1_alsa_config = {
 	.name			= "SX1 EGold",
 	.mcbsp_regs_alsa	= &mcbsp1_regs,
@@ -395,11 +380,8 @@ static struct omap_usb_config sx1_usb_config __initdata = {
 
 static struct omap_mmc_config sx1_mmc_config __initdata = {
 	.mmc [0] = {
-		.enabled 	= 1,
+		.enabled	= 1,
 		.wire4		= 0,
-		.wp_pin		= -1,
-		.power_pin	= -1, /* power is in Sofia */
-		.switch_pin	= OMAP_MPUIO(3),
 	},
 };
 
@@ -428,13 +410,15 @@ static struct omap_uart_config sx1_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
-static struct omap_board_config_kernel sx1_config[] = {
+static struct omap_board_config_kernel sx1_config[] __initdata = {
 	{ OMAP_TAG_USB,	&sx1_usb_config },
 	{ OMAP_TAG_MMC,	&sx1_mmc_config },
 	{ OMAP_TAG_LCD,	&sx1_lcd_config },
 	{ OMAP_TAG_UART,	&sx1_uart_config },
 };
+
 /*-----------------------------------------*/
+
 static void __init omap_sx1_init(void)
 {
 	platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));

arch/arm/mach-omap1/board-voiceblue.c

@@ -34,9 +34,6 @@
 #include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
 
-extern void omap_init_time(void);
-extern int omap_gpio_init(void);
-
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
 		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x40000),

arch/arm/mach-omap1/mailbox.c

@@ -51,7 +51,7 @@ static inline void mbox_write_reg(unsigned int val, unsigned int reg)
 }
 
 /* msg */
-static inline mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox)
+static mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox)
 {
 	struct omap_mbox1_fifo *fifo =
 		&((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
@@ -63,7 +63,7 @@ static inline mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox)
 	return msg;
 }
 
-static inline void
+static void
 omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
 {
 	struct omap_mbox1_fifo *fifo =
@@ -73,12 +73,12 @@ omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
 	mbox_write_reg(msg >> 16, fifo->cmd);
 }
 
-static inline int omap1_mbox_fifo_empty(struct omap_mbox *mbox)
+static int omap1_mbox_fifo_empty(struct omap_mbox *mbox)
 {
 	return 0;
 }
 
-static inline int omap1_mbox_fifo_full(struct omap_mbox *mbox)
+static int omap1_mbox_fifo_full(struct omap_mbox *mbox)
 {
 	struct omap_mbox1_fifo *fifo =
 		&((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
@@ -87,21 +87,21 @@ static inline int omap1_mbox_fifo_full(struct omap_mbox *mbox)
 }
 
 /* irq */
-static inline void
+static void
 omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
 {
 	if (irq == IRQ_RX)
 		enable_irq(mbox->irq);
 }
 
-static inline void
+static void
 omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
 {
 	if (irq == IRQ_RX)
 		disable_irq(mbox->irq);
 }
 
-static inline int
+static int
 omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
 {
 	if (irq == IRQ_TX)

arch/arm/mach-omap1/pm.c

@@ -57,7 +57,6 @@
 #include <asm/arch/pm.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/dma.h>
-#include <asm/arch/dsp_common.h>
 #include <asm/arch/dmtimer.h>
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];