diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt new file mode 100644 index 000000000000..2efb48f20fb6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt @@ -0,0 +1,57 @@ +* Analog Devices ADV7604/11 video decoder with HDMI receiver + +The ADV7604 and ADV7611 are multiformat video decoders with an integrated HDMI +receiver. The ADV7604 has four multiplexed HDMI inputs and one analog input, +and the ADV7611 has one HDMI input and no analog input. + +These device tree bindings support the ADV7611 only at the moment. + +Required Properties: + + - compatible: Must contain one of the following + - "adi,adv7611" for the ADV7611 + + - reg: I2C slave address + + - hpd-gpios: References to the GPIOs that control the HDMI hot-plug + detection pins, one per HDMI input. The active flag indicates the GPIO + level that enables hot-plug detection. + +The device node must contain one 'port' child node per device input and output +port, in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes +are numbered as follows. + + Port ADV7611 +------------------------------------------------------------ + HDMI 0 + Digital output 1 + +The digital output port node must contain at least one endpoint. + +Optional Properties: + + - reset-gpios: Reference to the GPIO connected to the device's reset pin. + +Example: + + hdmi_receiver@4c { + compatible = "adi,adv7611"; + reg = <0x4c>; + + reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>; + hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + hdmi_in: endpoint { + remote-endpoint = <&ccdc_in>; + }; + }; + }; diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 342d73d3989b..1323189a45fa 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -2663,13 +2663,58 @@ static const struct adv7604_chip_info adv7604_chip_info[] = { }, }; +static struct i2c_device_id adv7604_i2c_id[] = { + { "adv7604", (kernel_ulong_t)&adv7604_chip_info[ADV7604] }, + { "adv7611", (kernel_ulong_t)&adv7604_chip_info[ADV7611] }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7604_i2c_id); + +static struct of_device_id adv7604_of_id[] __maybe_unused = { + { .compatible = "adi,adv7611", .data = &adv7604_chip_info[ADV7611] }, + { } +}; +MODULE_DEVICE_TABLE(of, adv7604_of_id); + +static int adv7604_parse_dt(struct adv7604_state *state) +{ + /* Disable the interrupt for now as no DT-based board uses it. */ + state->pdata.int1_config = ADV7604_INT1_CONFIG_DISABLED; + + /* Use the default I2C addresses. */ + state->pdata.i2c_addresses[ADV7604_PAGE_AVLINK] = 0x42; + state->pdata.i2c_addresses[ADV7604_PAGE_CEC] = 0x40; + state->pdata.i2c_addresses[ADV7604_PAGE_INFOFRAME] = 0x3e; + state->pdata.i2c_addresses[ADV7604_PAGE_ESDP] = 0x38; + state->pdata.i2c_addresses[ADV7604_PAGE_DPP] = 0x3c; + state->pdata.i2c_addresses[ADV7604_PAGE_AFE] = 0x26; + state->pdata.i2c_addresses[ADV7604_PAGE_REP] = 0x32; + state->pdata.i2c_addresses[ADV7604_PAGE_EDID] = 0x36; + state->pdata.i2c_addresses[ADV7604_PAGE_HDMI] = 0x34; + state->pdata.i2c_addresses[ADV7604_PAGE_TEST] = 0x30; + state->pdata.i2c_addresses[ADV7604_PAGE_CP] = 0x22; + state->pdata.i2c_addresses[ADV7604_PAGE_VDP] = 0x24; + + /* Hardcode the remaining platform data fields. */ + state->pdata.disable_pwrdnb = 0; + state->pdata.disable_cable_det_rst = 0; + state->pdata.default_input = -1; + state->pdata.blank_data = 1; + state->pdata.op_656_range = 1; + state->pdata.alt_data_sat = 1; + state->pdata.insert_av_codes = 1; + state->pdata.op_format_mode_sel = ADV7604_OP_FORMAT_MODE0; + state->pdata.bus_order = ADV7604_BUS_ORDER_RGB; + + return 0; +} + static int adv7604_probe(struct i2c_client *client, const struct i2c_device_id *id) { static const struct v4l2_dv_timings cea640x480 = V4L2_DV_BT_CEA_640X480P59_94; struct adv7604_state *state; - struct adv7604_platform_data *pdata = client->dev.platform_data; struct v4l2_ctrl_handler *hdl; struct v4l2_subdev *sd; unsigned int i; @@ -2688,19 +2733,32 @@ static int adv7604_probe(struct i2c_client *client, return -ENOMEM; } - state->info = &adv7604_chip_info[id->driver_data]; state->i2c_clients[ADV7604_PAGE_IO] = client; /* initialize variables */ state->restart_stdi_once = true; state->selected_input = ~0; - /* platform data */ - if (!pdata) { + if (IS_ENABLED(CONFIG_OF) && client->dev.of_node) { + const struct of_device_id *oid; + + oid = of_match_node(adv7604_of_id, client->dev.of_node); + state->info = oid->data; + + err = adv7604_parse_dt(state); + if (err < 0) { + v4l_err(client, "DT parsing error\n"); + return err; + } + } else if (client->dev.platform_data) { + struct adv7604_platform_data *pdata = client->dev.platform_data; + + state->info = (const struct adv7604_chip_info *)id->driver_data; + state->pdata = *pdata; + } else { v4l_err(client, "No platform data!\n"); return -ENODEV; } - state->pdata = *pdata; /* Request GPIOs. */ for (i = 0; i < state->info->num_dv_ports; ++i) { @@ -2799,7 +2857,7 @@ static int adv7604_probe(struct i2c_client *client, continue; state->i2c_clients[i] = - adv7604_dummy_client(sd, pdata->i2c_addresses[i], + adv7604_dummy_client(sd, state->pdata.i2c_addresses[i], 0xf2 + i); if (state->i2c_clients[i] == NULL) { err = -ENOMEM; @@ -2873,21 +2931,15 @@ static int adv7604_remove(struct i2c_client *client) /* ----------------------------------------------------------------------- */ -static struct i2c_device_id adv7604_id[] = { - { "adv7604", ADV7604 }, - { "adv7611", ADV7611 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, adv7604_id); - static struct i2c_driver adv7604_driver = { .driver = { .owner = THIS_MODULE, .name = "adv7604", + .of_match_table = of_match_ptr(adv7604_of_id), }, .probe = adv7604_probe, .remove = adv7604_remove, - .id_table = adv7604_id, + .id_table = adv7604_i2c_id, }; module_i2c_driver(adv7604_driver);