Commit Graph

520 Commits

Author SHA1 Message Date
Tony Lindgren
c7d8669f46 bus: ti-sysc: Fix watchdog quirk handling
I noticed that when probed with ti-sysc, watchdog can trigger on am3, am4
and dra7 causing a device reset.

Turns out I made several mistakes implementing the watchdog quirk handling:

1. We must do both writes to spr register

2. We must also call the reset quirk on disable

3. On am3 and am4 we need to also set swsup quirk flag

I probably only tested this earlier with watchdog service running when the
watchdog never gets disabled.

Fixes: 4e23be473e ("bus: ti-sysc: Add support for module specific reset quirks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-18 08:45:32 -07:00
Linus Torvalds
cef0aa0ce8 ARM: SoC fixes
A few fixes that have trickled in through the merge window:
 
  - Video fixes for OMAP due to panel-dpi driver removal
  - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7
  - Fixing arch version on ASpeed ast2500
  - Two fixes for reset handling on ARM SCMI
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl2Q+QsPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx36yIP/2eeqmdd97XJUiX2qGlKlDC+AtVUJnnxzhLa
 jSAIbbN74MCVH3M0BW1ECPbHHXFR54sffLFWwu8rVBr5nRdNPt0xLdXiVJcIVMfr
 by0LeMAOcw9CDxKsLqwwAagKq4HVnwqbZ+RVC3CjGz+Sp+vvSz+T/Ta6GzblASYv
 3zOs1FD+e4pwDqonyp6P5vAlBQ6qFL7AVZFPpNmXsqIzcT1bGEj/RwReErCIoevL
 7ZJr1R69D5IaEXYwWt8dT7bNwMR0gRvskrCQVCCBBcwHkO1PRd6cTXQ9EFBG8LgV
 LCM9F8Z+6QMigqvDFgSMpIz6orhKQKGpHF7K023c4DKBVqwigT/CaTOZgFr74pUJ
 Zp7s2dFcmJo1J2HlYDz3Nde4BFJXy3gNJphD7yI9xMfBNe1EXclvqtqICvnpMpgt
 thDXrReyDhMQukOBlrUcMxABP/EK97fULpC2Z2kaBq3SbnZILAOKFKtISmh5o6eI
 s4+QYETaqnWjYJE9d+YYg0VwNAifSzplSrGJVK43mGpqpQRx49cw25vL8bV/ZRgg
 HMTUX97Oho+EgDC9BWiahe0TZaWBBGJ3hWI/mrBW/dNowxoHp3l/fCcLdBPPKltS
 qo4BbbKPdrgq5o3YRBSjftdnbJ8eE9DTRs1sAsDQeNb9XJih9aiAQE3hxAA9wdJO
 vcRFcZ1Q
 =s4qF
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks
2019-09-30 10:04:28 -07:00
Olof Johansson
9bfd7319e8 Merge tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omap variants

Few fixes for ti-sysc interconnect target module driver for no-idle
quirks that caused nfsroot to fail on some dra7 boards.

And let's fixes to get LCD working again for logicpd board that got
broken a while back with removal of panel-dpi driver. We need to now
use generic CONFIG_DRM_PANEL_SIMPLE instead.

* tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-09-29 11:20:48 -07:00
Linus Torvalds
f97c81dc6c ARM: SoC: late updates for v5.4
This is some material that we picked up into our tree late or
 that had complex inter-depondencies. The fact that there are these
 interdependencies tends to meant that these are often actually the most
 interesting new additions:
 
 The new Aspeed AST2600 baseboard management controller is added, this
 is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some
 dependencies on other device drivers.
 
 After many years, support for the MMP2 based OLPC XO-1.75 finally makes
 it into the kernel.
 
 The Armada 3720 based Turris Mox open source router platform is a late
 addition and it follows some preparatory work across multiple branches.
 
 The OMAP2+ platform had some large-scale cleanup involving driver
 changes and DT changes, here we finish it off, dropping a lot of the
 now-unused platform data.
 
 The TI K3 platform that got added for 5.3 gains a lot more support
 for individual bits on the SoC, this part just came late for the
 merge window.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6P3AAoJEJpsee/mABjZMFUP/i/J9CNJjEec0cWCG1XgP/qh
 SpKFf2g9Y9QzqAzDDovo7atTGHTCG8C0fn8W+bkv9h7dWj2uxRtFISM9COomUoHa
 0qXUL9bbDB3LAvstLV451p4c67XsJUazV9KZPD7VsCquucWbDDYaGPz+0reSRm6y
 imK2jXqD0leG0CNbgRXfh64J32TF3M0/XnwbsNJreCmQvwUvkYLL5VNi/qcnvfyp
 k0g1/5OzH9mLertoVKWqJ9o1919Yvxdl6/eyDmTPmX08bs03WnPbCEzRVO/zkOKZ
 O6RcAlsjiLblQdfbDJKfbaYDDaE53d2NwdCvBIdSPmDoYM5eYjQC4PmDM0+0dmHe
 bFd9giBjzU2Uab7ylgeoVl6pX1ISk6bwmZxNup45cy0xyw8wuky02Wq2bQTuZbgI
 UcBlOGWR4aH/OCpNafn+ovDBYGc64I7EQobG7UiilrVq/libx1Uo7yjlWSxe4j8n
 wFchiB8It24WUiS4JhJFrTklkaf5JW3K3czdDATW7aZKjv+fnHU5GMre/hvNP4z7
 qROlP69/eqNXG25VOcwWPQE8yhP43+ZgyvoVwDh1H6VZdy9WxgYyEoiBAhFfcrng
 +RVAT4rzylPmKP8oygVF1fpTHTS8xHrYBbjkdRaj5KqmTDdqI/nMsYoq+E0R1ScV
 EsnyNVq7wnvH12zrOv+I
 =Qtkp
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC late updates from Arnd Bergmann:
 "This is some material that we picked up into our tree late or that had
  complex inter-depondencies. The fact that there are these
  interdependencies tends to meant that these are often actually the
  most interesting new additions:

   - The new Aspeed AST2600 baseboard management controller is added,
     this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
     had some dependencies on other device drivers.

   - After many years, support for the MMP2 based OLPC XO-1.75 finally
     makes it into the kernel.

   - The Armada 3720 based Turris Mox open source router platform is a
     late addition and it follows some preparatory work across multiple
     branches.

   - The OMAP2+ platform had some large-scale cleanup involving driver
     changes and DT changes, here we finish it off, dropping a lot of
     the now-unused platform data.

   - The TI K3 platform that got added for 5.3 gains a lot more support
     for individual bits on the SoC, this part just came late for the
     merge window"

[ This pull request itself wasn't actually sent late at all by Arnd, but
  I waited on the branches that it used to be pulled first, so it ends
  up being merged much later than the other ARM SoC pull requests this
  merge window     - Linus ]

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  ARM: dts: dir685: Drop spi-cpol from the display
  ARM: dts: aspeed: Add AST2600 pinmux nodes
  ARM: dts: aspeed: Add AST2600 and EVB
  ARM: exynos: Enable support for ARM architected timers
  ARM: samsung: Fix system restart on S3C6410
  ARM: dts: mmp2: add OLPC XO 1.75 machine
  ARM: dts: mmp2: rename the USB PHY node
  ARM: dts: mmp2: specify reg-shift for the UARTs
  ARM: dts: mmp2: add camera interfaces
  ARM: dts: mmp2: fix the SPI nodes
  ARM: dts: mmp2: trivial whitespace fix
  arm64: dts: marvell: add DTS for Turris Mox
  dt-bindings: marvell: document Turris Mox compatible
  arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
  arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-j721e-main: Add hwspinlock node
  arm64: dts: ti: k3-am65-main: Add hwspinlock node
  arm64: dts: k3-j721e: Add gpio-keys on common processor board
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
  ...
2019-09-20 15:53:02 -07:00
Linus Torvalds
399eb9b6cb ARM: SoC driver updates for v5.4
The branch contains driver changes that are tightly
 connected to SoC specific code. Aside from smaller
 cleanups and bug fixes, here is a list of the notable
 changes.
 
 New device drivers:
 
 - The Turris Mox router has a new "moxtet" bus driver
   for its on-board pluggable extension bus. The
   same platform also gains a firmware driver.
 
 - The Samsung Exynos family gains a new Chipid driver
   exporting using the soc device sysfs interface
 
 - A similar socinfo driver for Qualcomm Snapdragon
   chips.
 
 - A firmware driver for the NXP i.MX DSP IPC protocol
   using shared memory and a mailbox
 
 Other changes:
 
 - The i.MX reset controller driver now supports the
   NXP i.MX8MM chip
 
 - Amlogic SoC specific drivers gain support for
   the S905X3 and A311D chips
 
 - A rework of the TI Davinci framebuffer driver to
   allow important cleanups in the platform code
 
 - A couple of device drivers for removed ARM SoC
   platforms are removed. Most of the removals were
   picked up by other maintainers, this contains
   whatever was left.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6SUAAoJEJpsee/mABjZAfwP/01bXBOlGVusNH2zuh8IUSHb
 //5sTdWpwa2ugRekLOJUOjo2p9Fu70yH6xr4RUHI0rcRjZA0xR3bZPx45gI8LRHQ
 tfb25LaKqfgZjWMCJ8due1Lh7B6ffOQukryMtM/LoiCtqsy7b6aThEKaLpM9/Owl
 t53o4wKaVQJK5He9JQom9NOZidkl7tYLHmDQTOXhX2UEA/i45vtfjdsEBvoFPbTx
 +bYvlqs+SWlpDJk29j+oBOeKadPF+TFboLDiUCxH44MC3OsH51zjtKVBRTtbNMkb
 ek/ci5x9hCeHcYSEigNq2EMzEln09Yxyvjk8U/jLiJ1h1kz3p5MjqJbVMF1rYXpe
 ALuAwinM8Zv2o5/UOCkiQTWq79PtpOKHZKpNBXkaJ8kyqBLMSy8Fs3hCvXrDnjnQ
 TC8jX7UBqHRV2rbQIYehAQAxTvcRgTbqusQGLkUJInlux6go57LoMYHPABpHftJV
 kRdVeT0KzdCz1pvQwyekIog5hPLNTBi4jw6eQcOgeENvAea1MJa8lMMfKcVbIdS0
 ZVvxLl+K6noEKAv5lSeHAzjXq+cQFr3zDCsWy351mJETDHmE8zjsaHN1SgbRYLEk
 ZqzNwUYaPYBis38g85qaY/TSsJrWJ+jP8u7s9HTw3Oywg8SRy5vtW177s00/9VOd
 PYZ2UpqUeX8cdvggqUUU
 =lxFi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This contains driver changes that are tightly connected to SoC
  specific code. Aside from smaller cleanups and bug fixes, here is a
  list of the notable changes.

  New device drivers:

   - The Turris Mox router has a new "moxtet" bus driver for its
     on-board pluggable extension bus. The same platform also gains a
     firmware driver.

   - The Samsung Exynos family gains a new Chipid driver exporting using
     the soc device sysfs interface

   - A similar socinfo driver for Qualcomm Snapdragon chips.

   - A firmware driver for the NXP i.MX DSP IPC protocol using shared
     memory and a mailbox

  Other changes:

   - The i.MX reset controller driver now supports the NXP i.MX8MM chip

   - Amlogic SoC specific drivers gain support for the S905X3 and A311D
     chips

   - A rework of the TI Davinci framebuffer driver to allow important
     cleanups in the platform code

   - A couple of device drivers for removed ARM SoC platforms are
     removed. Most of the removals were picked up by other maintainers,
     this contains whatever was left"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  bus: uniphier-system-bus: use devm_platform_ioremap_resource()
  soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
  dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
  firmware: ti_sci: Allow for device shared and exclusive requests
  bus: imx-weim: remove incorrect __init annotations
  fbdev: remove w90x900/nuc900 platform drivers
  spi: remove w90x900 driver
  net: remove w90p910-ether driver
  net: remove ks8695 driver
  firmware: turris-mox-rwtm: Add sysfs documentation
  firmware: Add Turris Mox rWTM firmware driver
  dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
  bus: moxtet: fix unsigned comparison to less than zero
  bus: moxtet: remove set but not used variable 'dummy'
  ARM: scoop: Use the right include
  dt-bindings: power: add Amlogic Everything-Else power domains bindings
  soc: amlogic: Add support for Everything-Else power domains controller
  fbdev: da8xx: use resource management for dma
  fbdev: da8xx-fb: drop a redundant if
  fbdev: da8xx-fb: use devm_platform_ioremap_resource()
  ...
2019-09-16 15:52:38 -07:00
Tony Lindgren
a4c8723a16 bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
Commit d098913a10 ("bus: ti-sysc: Fix clock handling for no-idle
quirks") fixed handling for no-idle quirk modules that are not enabled
by the bootloader.

But it also caused unpaired clockdomain calls that won't allow idling
the system. That's because clkdm_allow_idle_nolock() and
clkdm_deny_idle_nolock() have usage count with clkdm->forcewake_count.

Let's drop the unpaired sysc_clkdm_deny_idle() to fix idling of devices.

Fixes: d098913a10 ("bus: ti-sysc: Fix clock handling for no-idle quirks")
Cc: Keerthy <j-keerthy@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-06 12:57:46 -07:00
Tony Lindgren
2783d0638a bus: ti-sysc: Fix handling of invalid clocks
We can currently get "Unable to handle kernel paging request at
virtual address" for invalid clocks with dts node but no driver:

(__clk_get_hw) from [<c0138ebc>] (ti_sysc_find_one_clockdomain+0x18/0x34)
(ti_sysc_find_one_clockdomain) from [<c0138f0c>] (ti_sysc_clkdm_init+0x34/0xdc)
(ti_sysc_clkdm_init) from [<c0584660>] (sysc_probe+0xa50/0x10e8)
(sysc_probe) from [<c065c6ac>] (platform_drv_probe+0x58/0xa8)

Let's add IS_ERR checks to ti_sysc_clkdm_init() as And let's start treating
clk_get() with -ENOENT as a proper error. If the clock name is specified
in device tree we must succeed with clk_get() to continue. For modules with
no clock names specified in device tree we will just ignore the clocks.

Fixes: 2b2f7def05 ("bus: ti-sysc: Add support for missing clockdomain handling")
Acked-by: Roger Quadros <rogerq@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-05 13:01:29 -07:00
Masahiro Yamada
ef92bfdaa7 bus: uniphier-system-bus: use devm_platform_ioremap_resource()
Replace the chain of platform_get_resource() and devm_ioremap_resource()
with devm_platform_ioremap_resource().

This allows to remove the local variable for (struct resource *), and
have one function call less.

Link: https://lore.kernel.org/r/20190905032122.26076-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-05 17:57:18 +02:00
Tony Lindgren
d098913a10 bus: ti-sysc: Fix clock handling for no-idle quirks
NFSroot can fail on dra7 when cpsw is probed using ti-sysc interconnect
target module driver as reported by Keerthy.

Device clocks and the interconnect target module may or may not be
enabled by the bootloader on init, but we currently assume the clocks
and module are on from the bootloader for "ti,no-idle" and
"ti,no-idle-on-init" quirks as reported by Grygorii Strashko.

Let's fix the issue by always enabling clocks init, and
never disable them for "ti,no-idle" quirk. For "ti,no-idle-on-init"
quirk, we must decrement the usage count later on to allow PM
runtime to idle the module if requested.

Fixes: 1a5cd7c23c ("bus: ti-sysc: Enable all clocks directly during init to read revision")
Cc: Keerthy <j-keerthy@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Reported-by: Keerthy <j-keerthy@ti.com>
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-05 07:37:22 -07:00
Arnd Bergmann
3b1261fb72 bus: imx-weim: remove incorrect __init annotations
The probe function is no longer __init, so anything it calls now
must also be available at runtime, as Kbuild points out when building
with clang-9:

WARNING: vmlinux.o(.text+0x6e7040): Section mismatch in reference from the function weim_probe() to the function .init.text:imx_weim_gpr_setup()
The function weim_probe() references
the function __init imx_weim_gpr_setup().
This is often because weim_probe lacks a __init
annotation or the annotation of imx_weim_gpr_setup is wrong.

WARNING: vmlinux.o(.text+0x6e70f0): Section mismatch in reference from the function weim_probe() to the function .init.text:weim_timing_setup()
The function weim_probe() references
the function __init weim_timing_setup().
This is often because weim_probe lacks a __init
annotation or the annotation of weim_timing_setup is wrong.

Remove the remaining __init markings that are now wrong.

Fixes: 4a92f07816 ("bus: imx-weim: use module_platform_driver()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:59:32 +02:00
Colin Ian King
6811d26df5 bus: moxtet: fix unsigned comparison to less than zero
Currently the size_t variable res is being checked for
an error failure however the unsigned variable is never
less than zero so this test is always false. Fix this by
making variable res ssize_t

Link: https://lore.kernel.org/r/20190822010351.15660-2-marek.behun@nic.cz
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 5bc7f990cd ("bus: Add support for Moxtet bus")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:30:16 +02:00
Jason Yan
caebdd3c11 bus: moxtet: remove set but not used variable 'dummy'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/bus/moxtet.c: In function moxtet_remove:
drivers/bus/moxtet.c:822:6: warning: variable dummy set but not used
[-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20190822010351.15660-3-marek.behun@nic.cz
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:30:10 +02:00
Arnd Bergmann
49826a68b5 mvebu dt64 for 5.4 (part 2)
Add support for Turris Mox board (Armada 3720 SoC based)
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXW5eNQAKCRALBhiOFHI7
 1aqnAJsGU/B3GFbhiuwI4+l3In7TMVVpIgCbB1T/eo1RJhvh9kH9zMj641Rmsk0=
 =B8dQ
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu into arm/late

mvebu dt64 for 5.4 (part 2)

Add support for Turris Mox board (Armada 3720 SoC based)

* tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu: (53 commits)
  arm64: dts: marvell: add DTS for Turris Mox
  dt-bindings: marvell: document Turris Mox compatible
  arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
  arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
  arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply
  arm64: dts: marvell: Add 7k/8k PHYs in PCIe nodes
  arm64: dts: marvell: Add 7k/8k PHYs in USB3 nodes
  arm64: dts: marvell: Add 7k/8k per-port PHYs in SATA nodes
  arm64: dts: marvell: Add CP110 COMPHY clocks
  arm64: dts: marvell: armada-37xx: add mailbox node
  dt-bindings: gpio: Document GPIOs via Moxtet bus
  drivers: gpio: Add support for GPIOs over Moxtet bus
  bus: moxtet: Add sysfs and debugfs documentation
  dt-bindings: bus: Document moxtet bus binding
  bus: Add support for Moxtet bus
  reset: Add support for resets provided by SCMI
  firmware: arm_scmi: Add RESET protocol in SCMI v2.0
  dt-bindings: arm: Extend SCMI to support new reset protocol
  firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol
  firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels
  ...

Link: https://lore.kernel.org/r/87h85two0r.fsf@FE-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:28:47 +02:00
Arnd Bergmann
30d8bb9003 more ti-sysc driver changes for omap variants for v5.4
Few changes mostly to deal with sgx SoC glue quirk for omap36xx that
 is needed for the related sgx SoC glue dts branch. The other changes
 are to simplify sysc_check_one_child() sysc_check_children() to be void
 functions, and detect d2d module when debugging is enabled.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl1kCukRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNGSg//aGJnfbZAf98HNJMo/6rnY88pxf/smR9W
 YdIjP4DbqIq//W0VvfhI/QlnsGPcgBNn8ir6c3U8dyEAsYDl5HgOWqZHRClDlnBv
 ISGniT7oQBRleJheGzAOk8axbsF3T6cpIt9TjBl0I8GbSii7DIla80m+pI5FEUx7
 HspyxiN2yyvkhN47FzrVAOJvYGw7ceri0YkVqiMk7IqKNcw6jVXA0yqqfJNU+EqG
 4oFa+kt0RdkbxIsujWNYiN3r8RGET61lBb0nTFH39nu9VwDqNjiW69lNY+mvxL6F
 yohSKrKxrpaWPQ8FxUzqBECxUMSiN/iK12I3A+Jg+vvs7cjoLbHvQHj7KGPiCWH8
 qNek9KTpMnH06k2UbulWZ/8GCuzgBKIt+0fXzSovaVqzT/PrdjW9dN3AJ5H7ip/F
 EzkzJoxAF5PTaUAIxVsDfTpQGr/H2TXzSYpJc50iWTPTC7DIc7B0U+gNqN+TAIWN
 AEFoEk2U/e3Hyl+aFaqaY7+YoJOOkWz6qJk/5zXwNhl7b7qfrF6uhcfkQCqP6/ht
 cAPgz4FFiZINMPWnzt9srQxmC5gNj2i565t3NQ7gfv10XNGsxI0/6XhnmfOq8myE
 Pdzv6XlfZWFSz9TvQwFGoQzcGxxo94jtJ9rioPia5op1flx2cOZ09mzAZE/Bx5cL
 +ATlPBMxQjo=
 =UBeA
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.4/ti-sysc-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

more ti-sysc driver changes for omap variants for v5.4

Few changes mostly to deal with sgx SoC glue quirk for omap36xx that
is needed for the related sgx SoC glue dts branch. The other changes
are to simplify sysc_check_one_child() sysc_check_children() to be void
functions, and detect d2d module when debugging is enabled.

* tag 'omap-for-v5.4/ti-sysc-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Detect d2d when debug is enabled
  bus: ti-sysc: Add module enable quirk for SGX on omap36xx
  bus: ti-sysc: Change return types of functions

Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:20:41 +02:00
Arnd Bergmann
bf3176b350 Driver changes for ti-sysc for v5.4
Few changes to prepare for using a reset driver for PRM rstctrl mostly
 to deal with the clocks for reset. Then few minor clean-up patches and
 SPDX license identifier changes, and add a MAINTAINERs file entry.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl1gZLgRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNj5A/9F56FliHXmFRCsVw1vja5bgWagmOVnptx
 Xa0K29GanTx/cuTaUi5Cp+EPJSDYV2REp2J8jK9jfycEEm9ww3MovFCXJIYeUha3
 URMsyd9PctoQyfYdgqfTFs/4HE6NUjCFRjegZWN4K+A0vCx6x5xli7565QTrk0iL
 /Eok6oCA3tZkG3cBHn7ZNYahf0NNTlKhYe2Mq2TsJTgROymQ5I9SaCHPSIgdWuH3
 v0ysCyQnCNc9QLRLLdy2qnk1k5T/Mf04CMlUs8OIClm1d9cl0Wox83sQemaC5oLZ
 lpLBQYyuojob4rK2T2u4c6xNPrrDKltJufB0SyDuYBj30rCCPE/I3GwWZ9tjxcC0
 OHq8r+PTdGASyD0H5RfXkXRQARUDuQqt8DQR6lwSnhcCz8pUooDrhGY4+44ynbwg
 /tBfKrEr1PcFMnN28Htz+djSqzTB7GNa4XINV87SNmnKuEFQ/nE/CPW7/McVK7Dx
 WsRPC/ial+LhUio8dNNML9Ul2+xw46tTxiO0wvMI6nI6NgmDbQ1zOmBMFzN6ze8y
 naAJSCA1kP9zeYZ8y/YWio8TTRbdHZznX8nqNXQ6t/UGBMrxaWeHiOulKmz1YlwR
 cBHduWwgF6t/qB7qrxwqNddUKcRRIfJA//h0QwieQLdC5EZeq0cUbn4yHMchnCIx
 DuOc9DS0NKk=
 =RAgR
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.4/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

Driver changes for ti-sysc for v5.4

Few changes to prepare for using a reset driver for PRM rstctrl mostly
to deal with the clocks for reset. Then few minor clean-up patches and
SPDX license identifier changes, and add a MAINTAINERs file entry.

* tag 'omap-for-v5.4/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: remove set but not used variable 'quirks'
  bus: ti-sysc: allow reset sharing across devices
  bus: ti-sysc: rework the reset handling
  bus: ti-sysc: re-order the clkdm control around reset handling
  bus: ti-sysc: Add missing kerneldoc comments
  bus: ti-sysc: Switch to SPDX license identifier
  dt-bindings: ti-sysc: Add SPDX license identifier
  MAINTAINERS: Add ti-sysc files under the OMAP2+ entry

Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:20:04 +02:00
Arnd Bergmann
bff00fdf03 i.MX drivers update for 5.4:
- A series from Anson Huang to add UID support for i.MX8 SoC and SCU
    drivers.
  - A series from Daniel Baluta to add DSP IPC driver for communication
    between host AP (Linux) and the firmware running on DSP embedded in
    i.MX8 SoCs.
  - A small fix for GPCv2 error code printing.
  - Switch from module_platform_driver_probe() to module_platform_driver()
    for imx-weim driver, as we need the driver to probe again when device
    is present later.
  - Add optional burst clock mode support for imx-weim driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdYoCEAAoJEFBXWFqHsHzOkDgH/jWNgp3QR3omPQGX80oM6/ga
 3x78GDJyQfzZKWyOJbWz12tzXWlD1fmGIZy7SeuvXlYUbNnE1WU6ARFGDoBpjbew
 DOYoPT9x7eJemSdnEE43g2vtspEzb6Afvb7dr78OPaik24eY0dFx90U0tzptmuVY
 gXxkAHo2ez6txXTu5Id9Z5Deitukb8NoK/9yyzTeD0oYn2hCooAp5fAl1rKgfLnf
 MpG29TCK8dxr/j7tzsbt2nutJJYy1Ybh/0WpOMXnBwdAz20JT7MU87DMil0//Q02
 0Es/P2xH7K4r3ca9mupDtXZps2DbnmYJorvxpfHuMXcyq0uxGhl1/zyhTv+LW4c=
 =5mGq
 -----END PGP SIGNATURE-----

Merge tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.4:
 - A series from Anson Huang to add UID support for i.MX8 SoC and SCU
   drivers.
 - A series from Daniel Baluta to add DSP IPC driver for communication
   between host AP (Linux) and the firmware running on DSP embedded in
   i.MX8 SoCs.
 - A small fix for GPCv2 error code printing.
 - Switch from module_platform_driver_probe() to module_platform_driver()
   for imx-weim driver, as we need the driver to probe again when device
   is present later.
 - Add optional burst clock mode support for imx-weim driver.

* tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: gpcv2: Print the correct error code
  bus: imx-weim: use module_platform_driver()
  firmware: imx: Add DSP IPC protocol interface
  soc: imx-scu: Add SoC UID(unique identifier) support
  bus: imx-weim: optionally enable burst clock mode
  firmware: imx: scu-pd: Add IRQSTR_DSP PD range
  firmware: imx: scu-pd: Add mu13 b side PD range
  firmware: imx: scu-pd: Rename mu PD range to mu_a
  soc: imx8: Add i.MX8MM UID(unique identifier) support
  soc: imx8: Add i.MX8MQ UID(unique identifier) support

Link: https://lore.kernel.org/r/20190825153237.28829-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 22:44:04 +02:00
Arnd Bergmann
2f7ce2aafa Allwinner drivers patches for 5.4
One driver to remove a redundant error message in the Allwinner RSB
 driver.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXV/5PwAKCRDj7w1vZxhR
 xUPDAQDCRzdhQef1Ki9OvNcT8o5tbxLK+YcWmmrlLAA4qe2TRQEA1/Um5ZS8s8p5
 MKz27KwMjt3PHVc9AoQiEzCHETKb1AA=
 =safB
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-drivers-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers

Allwinner drivers patches for 5.4

One driver to remove a redundant error message in the Allwinner RSB
driver.

* tag 'sunxi-drivers-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  bus: sunxi-rsb: Remove dev_err() usage after platform_get_irq()

Link: https://lore.kernel.org/r/f9edfc8e-19b7-4b6e-897a-35f3bdcc8643.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 22:16:34 +02:00
Arnd Bergmann
34614c30bf Hisilicon fixes for v5.3-rc
- Fixed RCU usage in logical PIO
 - Added a function to unregister a logical PIO range in logical PIO
   to support the fixes in the hisi-lpc driver
 - Fixed and optimized hisi-lpc driver to avoid potential use-after-free
   and driver unbind crash
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdVhtCAAoJEAvIV27ZiWZcP80P/0XIMAV5pFFXDuMNUciNg07v
 6E0GZbbEViY07D4XvwUcZx/b2nJzHi66H9kVTZ757QfsEiAQEyviG8NlYinwDUmD
 yOxdgg3g8BtNieahqEwUjewW7NwyERbrCNIhUYGsr2wC+4D0Fycj03mUgfKaziwv
 HWF3b7kXOGbZiUE4N/UogKzYsG+Pm8k+h33wjiagXctiZvu4w/FRhGcpS2fu0AZ3
 Oetp+2HPRwHM+eBQW8fLNlV9yV1tAODFKzVMv+JGHWpx+XJgzUwFSI1s/Q2ioN3k
 vEiXrmSaR1XT52yEe8qviV4NCD0XEtWeVmIMa8ZplsbmRzshTUcRPYO4nOJBiB6j
 tffPXv40AXI0vUwQnZ21NLbt+pfNWbxdMQV8rQWtmD4WmCg+7W11ARMCOA0eppAu
 GU8NXrNUO6+LU/w0snOLByEY+x3X9Vst5X0yIvS1uooEqtDK6RFGVy/KLAnWmPk5
 GracF2utVudo0SnzANywWmvI1xML1n7tgknunUpE8tbmogHiaNAJvI6xExh6aQqh
 bkBN5LBFWVHtGyCJbGGemC7ddADjaxjFxiErW4zayAlTWUs9EQNYTRfoV7oBEKff
 Zb1XiT3vfhYYje5FRZvV5pvuskWceQd9Pi5JsYm57NEcW2SAGe653ADMWIfsjOxe
 /eM48ilxlGbP2SYxSmoL
 =BnY2
 -----END PGP SIGNATURE-----

Merge tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/fixes

Hisilicon fixes for v5.3-rc

- Fixed RCU usage in logical PIO
- Added a function to unregister a logical PIO range in logical PIO
  to support the fixes in the hisi-lpc driver
- Fixed and optimized hisi-lpc driver to avoid potential use-after-free
  and driver unbind crash

* tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi:
  bus: hisi_lpc: Add .remove method to avoid driver unbind crash
  bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
  lib: logic_pio: Add logic_pio_unregister_range()
  lib: logic_pio: Avoid possible overlap for unregistering regions
  lib: logic_pio: Fix RCU usage

Link: https://lore.kernel.org/r/5D562335.7000902@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-29 17:23:52 +02:00
Tony Lindgren
7edd00f71f bus: ti-sysc: Detect d2d when debug is enabled
We want to see what modules probe when debug is enabled.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26 08:33:25 -07:00
Tony Lindgren
d7f563db77 bus: ti-sysc: Add module enable quirk for SGX on omap36xx
Add module enable quirk for SGX needed on omap36xx.

Cc: Adam Ford <aford173@gmail.com>
Cc: Filip Matijević <filip.matijevic.pz@gmail.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: moaz korena <moaz@korena.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Philipp Rossak <embed3d@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26 08:33:24 -07:00
Nishka Dasgupta
c6e78d7019 bus: ti-sysc: Change return types of functions
Change return type of functions sysc_check_one_child() and
sysc_check_children() from int to void as neither ever returns an error.
Modify call sites of both functions accordingly.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26 08:33:23 -07:00
Sascha Hauer
4a92f07816 bus: imx-weim: use module_platform_driver()
Switch from module_platform_driver_probe() to module_platform_driver().
The former is not suitable for booting with device tree as the driver
will be registered before the device and thus won't be probed again
when the device is present.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19 14:07:23 +02:00
Ioana Ciornei
eadf0b17b4 bus: fsl-mc: remove explicit device_link_del
Starting with commit 72175d4ea4 ("driver core: Make driver core own
stateful device links") stateful device links are owned by the driver
core and should not be explicitly removed on device unbind. Delete all
device_link_del appearances from the fsl-mc bus.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-By: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-16 14:17:35 -05:00
Marek Behún
5bc7f990cd bus: Add support for Moxtet bus
On the Turris Mox router different modules can be connected to the main
CPU board: currently a module with a SFP cage, a module with MiniPCIe
connector, a PCIe pass-through MiniPCIe connector module, a 4-port
switch module, an 8-port switch module, and a 4-port USB3 module.

For example:
  [CPU]-[PCIe-pass-through]-[PCIe]-[8-port switch]-[8-port switch]-[SFP]

Each of this modules has an input and output shift register, and these
are connected via SPI to the CPU board.

Via SPI we are able to discover which modules are connected, in which
order, and we can also read some information about the modules (eg.
their interrupt status), and configure them.
From each module 8 bits can be read (of which low 4 bits identify the
module) and 8 bits can be written.

For example from the module with a SFP cage we can read the LOS,
TX-FAULT and MOD-DEF0 signals, while we can write TX-DISABLE and
RATE-SELECT signals.

This driver creates a new bus type, called "moxtet". For each Mox module
it finds via SPI, it creates a new device on the moxtet bus so that
drivers can be written for them.

It also implements a virtual interrupt controller for the modules which
send their interrupt status over the SPI shift register. These modules
do this in addition to sending their interrupt status via the shared
interrupt line. When the shared interrupt is triggered, we read from the
shift register and handle IRQs for all devices which are in interrupt.

The topology of how Mox modules are connected can then be read by
listing /sys/bus/moxtet/devices.

Link: https://lore.kernel.org/r/20190812161118.21476-2-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14 15:30:35 +02:00
YueHaibing
c8a738f4cf bus: ti-sysc: remove set but not used variable 'quirks'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/bus/ti-sysc.c: In function sysc_reset:
drivers/bus/ti-sysc.c:1452:50: warning: variable quirks set but not used [-Wunused-but-set-variable]

It is never used since commit e0db94fe87 ("bus: ti-sysc: Make
OCP reset work for sysstatus and sysconfig reset bits")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 04:40:11 -07:00
Tero Kristo
bb88b86c1f bus: ti-sysc: allow reset sharing across devices
Some devices need to share their reset signals, like DSP MMUs, thus drop
the exclusive notation from reset request. Also, balance the init time
reset count, otherwise the resets will never be applied post boot.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 04:32:15 -07:00
Tero Kristo
4345f0dc01 bus: ti-sysc: rework the reset handling
If reset controllers are assigned to the ti-sysc target-module, only
ti-sysc is going to be able to control these. Thus, remove all the
disable_on_idle flag usage, and assert/de-assert the reset always
in the idle path. Otherwise the reset signal will always just be
de-asserted.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 04:32:09 -07:00
Tero Kristo
b603631443 bus: ti-sysc: re-order the clkdm control around reset handling
Parenting clockdomain for the IP should be enabled during the reset
handling logic, otherwise the reset may not finish properly. Re-order
the clockdomain control logic to avoid this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 04:32:03 -07:00
Suman Anna
b58056da2e bus: ti-sysc: Add missing kerneldoc comments
A few fields in various structures is missing the corresponding
kerneldoc comments. Add them. Also, fixed the comment for sidlemodes.

Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 04:13:32 -07:00
Suman Anna
54d662227c bus: ti-sysc: Switch to SPDX license identifier
Use the appropriate SPDX license identifier in the TI sysc
interconnect target driver source files and drop the previous
boilerplate license text. Also, add the the SPDX license
identifier in the associated ti-sysc header files.

Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 04:13:32 -07:00
Suman Anna
a304f483b6 bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
The clocks are not yet parsed and prepared until after a successful
sysc_get_clocks(), so there is no need to unprepare the clocks upon
any failure of any of the prior functions in sysc_probe(). The current
code path would have been a no-op because of the clock validity checks
within sysc_unprepare(), but let's just simplify the cleanup path by
returning the error directly.

While at this, also fix the cleanup path for a sysc_init_resets()
failure which is executed after the clocks are prepared.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 03:38:37 -07:00
John Garry
10e62b4797 bus: hisi_lpc: Add .remove method to avoid driver unbind crash
The original driver author seemed to be under the impression that a driver
cannot be removed if it does not have a .remove method. Or maybe if it is
a built-in platform driver.

This is not true. This crash can be created:

root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# echo HISI0191\:00 > unbind
root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# ipmitool raw 6 1
 Unable to handle kernel paging request at virtual address ffff000010035010
 Mem abort info:
   ESR = 0x96000047
   Exception class = DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000047
   CM = 0, WnR = 1
 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000118b000
 [ffff000010035010] pgd=0000041ffbfff003, pud=0000041ffbffe003, pmd=0000041ffbffd003, pte=0000000000000000
 Internal error: Oops: 96000047 [#1] PREEMPT SMP
 Modules linked in:
 CPU: 17 PID: 1473 Comm: ipmitool Not tainted 5.2.0-rc5-00003-gf68c53b414a3-dirty #198
 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
 pstate: 20000085 (nzCv daIf -PAN -UAO)
 pc : hisi_lpc_target_in+0x7c/0x120
 lr : hisi_lpc_target_in+0x70/0x120
 sp : ffff00001efe3930
 x29: ffff00001efe3930 x28: ffff841f9f599200
 x27: 0000000000000002 x26: 0000000000000000
 x25: 0000000000000080 x24: 00000000000000e4
 x23: 0000000000000000 x22: 0000000000000064
 x21: ffff801fb667d280 x20: 0000000000000001
 x19: ffff00001efe39ac x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000
 x15: 0000000000000000 x14: 0000000000000000
 x13: 0000000000000000 x12: 0000000000000000
 x11: 0000000000000000 x10: 0000000000000000
 x9 : 0000000000000000 x8 : ffff841febe60340
 x7 : ffff801fb55c52e8 x6 : 0000000000000000
 x5 : 0000000000ffc0e3 x4 : 0000000000000001
 x3 : ffff801fb667d280 x2 : 0000000000000001
 x1 : ffff000010035010 x0 : ffff000010035000
 Call trace:
  hisi_lpc_target_in+0x7c/0x120
  hisi_lpc_comm_in+0x88/0x98
  logic_inb+0x5c/0xb8
  port_inb+0x18/0x20
  bt_event+0x38/0x808
  smi_event_handler+0x4c/0x5a0
  check_start_timer_thread.part.4+0x40/0x58
  sender+0x78/0x88
  smi_send.isra.6+0x94/0x108
  i_ipmi_request+0x2c4/0x8f8
  ipmi_request_settime+0x124/0x160
  handle_send_req+0x19c/0x208
  ipmi_ioctl+0x2c0/0x990
  do_vfs_ioctl+0xb8/0x8f8
  ksys_ioctl+0x80/0xb8
  __arm64_sys_ioctl+0x1c/0x28
  el0_svc_common.constprop.0+0x64/0x160
  el0_svc_handler+0x28/0x78
  el0_svc+0x8/0xc
 Code: 941d1511 aa0003f9 f94006a0 91004001 (b9000034)
 ---[ end trace aa842b86af7069e4 ]---

The problem here is that the host goes away but the associated logical PIO
region remains registered, as do the children devices.

Fix by adding a .remove method to tidy-up by removing the child devices
and unregistering the logical PIO region.

Cc: stable@vger.kernel.org
Fixes: adf38bb0b5 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-08-13 14:54:34 +08:00
John Garry
1b15a5632a bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
If, after registering a logical PIO range, the driver probe later fails,
the logical PIO range memory will be released automatically.

This causes an issue, in that the logical PIO range is not unregistered
and the released range memory may be later referenced.

Fix by unregistering the logical PIO range.

And since we now unregister the logical PIO range for probe failure, avoid
the special ordering of setting logical PIO range ops, which was the
previous (poor) attempt at a safeguard against this.

Cc: stable@vger.kernel.org
Fixes: adf38bb0b5 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-08-13 14:54:28 +08:00
Stephen Boyd
9d4db2f5f0 bus: sunxi-rsb: Remove dev_err() usage after platform_get_irq()
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-08-06 14:15:49 +08:00
Sven Van Asbroeck
77266e722f bus: imx-weim: optionally enable burst clock mode
To enable burst clock mode, add the fsl,burst-clk-enable
property to the weim bus's devicetree node.

Example:
weim: weim@21b8000 {
	compatible = "fsl,imx6q-weim";
	reg = <0x021b8000 0x4000>;
	clocks = <&clks 196>;
	#address-cells = <2>;
	#size-cells = <1>;
	ranges = <0 0 0x08000000 0x08000000>;
	fsl,weim-cs-gpr = <&gpr>;
	fsl,burst-clk-enable;

	client-device@0,0 {
		compatible = "something";
		reg = <0 0 0x02000000>;
		#address-cells = <1>;
		#size-cells = <1>;
		bank-width = <2>;
		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
				0x0000c000 0x1404a38e 0x00000000>;
	};
};

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03 10:18:56 +02:00
Tony Lindgren
89bbc6f1eb ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
We are currently using a wrong register for dcan revision. Although
this is currently only used for detecting the dcan module, let's
fix it to avoid confusion.

Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-07-24 00:51:27 -07:00
Tony Lindgren
e212abd452 bus: ti-sysc: Fix using configured sysc mask value
We have cases where there are no softreset bits like with am335x lcdc.
In that case ti,sysc-mask = <0> needs to be handled properly.

Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-07-24 00:50:01 -07:00
Tony Lindgren
6ee8241d17 bus: ti-sysc: Fix handling of forced idle
For some devices we can get the following warning on boot:

ti-sysc 48485200.target-module: sysc_disable_module: invalid midlemode

Fix this by treating SYSC_IDLE_FORCE like we do for the other bits
for idlemodes mask.

Fixes: d59b60564c ("bus: ti-sysc: Add generic enable/disable functions")
Cc: Roger Quadros <rogerq@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-07-24 00:50:01 -07:00
Linus Torvalds
8362fd64f0 ARM: SoC-related driver updates
Various driver updates for platforms and a couple of the small driver
 subsystems we merge through our tree:
 
  - A driver for SCU (system control) on NXP i.MX8QXP
  - Qualcomm Always-on Subsystem messaging driver (AOSS QMP)
  - Qualcomm PM support for MSM8998
  - Support for a newer version of DRAM PHY driver for Broadcom (DPFE)
  - Reset controller support for Bitmain BM1880
  - TI SCI (System Control Interface) support for CPU control on AM654
    processors
  - More TI sysc refactoring and rework
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl0yK3YPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3WdUQAJEFRzY4+8VfsUspKmGwzHsrk7t1038JUEDE
 VL3yYlvSGeHg5a58AI5PCR5ZCsyPK7Yw9cAcYexd0frFR7BCwKWrjqem0Lb5ovdK
 CYM517DRtYPSBMF08Xw4pbZlT0yg65F1e9cf6BlUpkUZ6lJn4gUy8Y4BE6Aw/zuF
 QKtQNs6Q8BUZqS3uoOpJ/PY4JiUmLPQPO4Lry7Lud8Z7qgArCC326paC3wwqjLoC
 TpoMqb6izt7Vzo4BtTo5TUCyiEFZDlb/thhDySVlYRE7DQJusHBvRO9qgjI2ahOo
 1/935q1fJO7S6+Yvc8DIzrD/DrIUOvOshi31F/J6iWKkQkTUxtQwsVReZKaiOfSD
 fYxNVCgTcMS6ailKQSMQ0SYgXDa2gWdV3tS9XU8qML3tnDthi1nDmZks0QAAnFPS
 bXRcWGtgqeQJ+QJ7yyKrsD9POeaq3Hc5/f1DN34H//Cyn0ip/fD6fkLCMIfUDwmu
 TmO2Mnj6/fG/iBK+ToF+DaJ0/u3RiV2MC2vCE+0m3cVI9jtq9iA1y3UlmoaKUhhC
 t9znA+u8/Jc5S2zNQriI2Ja5q8nKfihL7Jf68ENvGzLc7YuAqP6yx1LMg1g6Wshc
 nLT+kHOF6DCUC3W7a8VuNyaxCwVtTbNTti+nvQVOmV6eaGiD5vzpXkHBWMbOJ7Lh
 YOBwGyb4
 =ek+j
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms and a couple of the small driver
  subsystems we merge through our tree:

   - A driver for SCU (system control) on NXP i.MX8QXP

   - Qualcomm Always-on Subsystem messaging driver (AOSS QMP)

   - Qualcomm PM support for MSM8998

   - Support for a newer version of DRAM PHY driver for Broadcom (DPFE)

   - Reset controller support for Bitmain BM1880

   - TI SCI (System Control Interface) support for CPU control on AM654
     processors

   - More TI sysc refactoring and rework"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits)
  reset: remove redundant null check on pointer dev
  soc: rockchip: work around clang warning
  dt-bindings: reset: imx7: Fix the spelling of 'indices'
  soc: imx: Add i.MX8MN SoC driver support
  soc: aspeed: lpc-ctrl: Fix probe error handling
  soc: qcom: geni: Add support for ACPI
  firmware: ti_sci: Fix gcc unused-but-set-variable warning
  firmware: ti_sci: Use the correct style for SPDX License Identifier
  soc: imx8: Use existing of_root directly
  soc: imx8: Fix potential kernel dump in error path
  firmware/psci: psci_checker: Park kthreads before stopping them
  memory: move jedec_ddr.h from include/memory to drivers/memory/
  memory: move jedec_ddr_data.c from lib/ to drivers/memory/
  MAINTAINERS: Remove myself as qcom maintainer
  soc: aspeed: lpc-ctrl: make parameter optional
  soc: qcom: apr: Don't use reg for domain id
  soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
  memory: tegra: Fix -Wunused-const-variable
  firmware: tegra: Early resume BPMP
  soc/tegra: Select pinctrl for Tegra194
  ...
2019-07-19 17:13:56 -07:00
Linus Torvalds
c884d8ac7f SPDX update for 5.2-rc6
Another round of SPDX updates for 5.2-rc6
 
 Here is what I am guessing is going to be the last "big" SPDX update for
 5.2.  It contains all of the remaining GPLv2 and GPLv2+ updates that
 were "easy" to determine by pattern matching.  The ones after this are
 going to be a bit more difficult and the people on the spdx list will be
 discussing them on a case-by-case basis now.
 
 Another 5000+ files are fixed up, so our overall totals are:
 	Files checked:            64545
 	Files with SPDX:          45529
 
 Compared to the 5.1 kernel which was:
 	Files checked:            63848
 	Files with SPDX:          22576
 This is a huge improvement.
 
 Also, we deleted another 20000 lines of boilerplate license crud, always
 nice to see in a diffstat.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyQYA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymnGQCghETUBotn1p3hTjY56VEs6dGzpHMAnRT0m+lv
 kbsjBGEJpLbMRB2krnaU
 =RMcT
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

Pull still more SPDX updates from Greg KH:
 "Another round of SPDX updates for 5.2-rc6

  Here is what I am guessing is going to be the last "big" SPDX update
  for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
  that were "easy" to determine by pattern matching. The ones after this
  are going to be a bit more difficult and the people on the spdx list
  will be discussing them on a case-by-case basis now.

  Another 5000+ files are fixed up, so our overall totals are:
	Files checked:            64545
	Files with SPDX:          45529

  Compared to the 5.1 kernel which was:
	Files checked:            63848
	Files with SPDX:          22576

  This is a huge improvement.

  Also, we deleted another 20000 lines of boilerplate license crud,
  always nice to see in a diffstat"

* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
  ...
2019-06-21 09:58:42 -07:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Olof Johansson
c3bd15a078 ti-sysc interconnect target module driver changes for v5.3
This series of changes improves probing devices with ti-sysc to the
 point where we can now probe most devices without the custom dts
 property "ti,hwmods" and no legacy platform data :)
 
 We add support for platform data callbacks for idling and unidling the
 clockdomain the module belongs to. The rest of the series mostly adds
 handling for the various quirks needed by old legacy modules such as
 i2c and watchdog. Some quirk handling is still missing for few modules,
 but those will be added as they get tested.
 
 The related platform data and dts changes will be sent separately.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl0AuTURHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXPn4A//Z7uWk98dwcIs8/28CaFTPsRGhx3p+hj0
 Mafl3eT5Q/y0TFGkMw3g5LSX5EZlz+5t6eFsolU+O8p6jsPoo5mcsGQfgkraydE3
 x0wfSkFiqJcTP4FFvrwcekSQZGjpeZoUdQZ/e2epSDWvPx9gRzLFR3wCLPJ1MOgg
 dveEJTnPfpFLliTZeVpcn4v2P4+KfBn4iu2ojr9qcLZL9QNFZr3NQLRdx6kUw7qf
 b3eRugzx3sBA4pKLEfqrOzqjP77W9sy1zDN5rA3GNgo+b+OyBhdu/pxxkREP4t4+
 8/1E/JndDVkO98ooFJ+MWdnh8HQmefEjyaoaYa7LN6438mivkOFPFAUMtuOdKzv/
 FTa9r7xpo1Iq5b3HyE7NA+xZfoHKBEHzY0zbNyJLz75Ctnh3zOuHAA3xwxOlbgn+
 UX/1DAS/7ALUXrXkk331VVzYX5UfOxrH2+CF2GF9vpCNZZ17Qp3ZKy4XW1Qv9nfy
 nozOkqSvbGG0tzhq+wLd6Soo2Vns7CfHRqDB8txLeBGtrk/kahHsxe7dLo4+fHk6
 DH0R7mZ6QnvaMWpJwkqoBUp7lD9ej9/pw2newbb5RyUDQqMjNvdY3zcBOeXeWulh
 m2hWFKt1JTGTvXtbTjOOnfQIyICUClMzo4VowLBplfZELJvK781/5P3Jb4ZOFF0N
 I1DN4vDxqMg=
 =Fxul
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.3/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers

ti-sysc interconnect target module driver changes for v5.3

This series of changes improves probing devices with ti-sysc to the
point where we can now probe most devices without the custom dts
property "ti,hwmods" and no legacy platform data :)

We add support for platform data callbacks for idling and unidling the
clockdomain the module belongs to. The rest of the series mostly adds
handling for the various quirks needed by old legacy modules such as
i2c and watchdog. Some quirk handling is still missing for few modules,
but those will be added as they get tested.

The related platform data and dts changes will be sent separately.

* tag 'omap-for-v5.3/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Add support for module specific reset quirks
  bus: ti-sysc: Detect uarts also on omap34xx
  bus: ti-sysc: Do rstctrl reset handling in two phases
  bus: ti-sysc: Add support for disabling module without legacy mode
  bus: ti-sysc: Set ENAWAKEUP if available
  bus: ti-sysc: Handle swsup idle mode quirks
  bus: ti-sysc: Handle clockactivity for enable and disable
  bus: ti-sysc: Enable interconnect target module autoidle bit on enable
  bus: ti-sysc: Allow QUIRK_LEGACY_IDLE even if legacy_mode is not set
  bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits
  bus: ti-sysc: Support 16-bit writes too
  bus: ti-sysc: Add support for missing clockdomain handling
  ARM: dts: dra71x: Disable usb4_tm target module
  ARM: dts: dra71x: Disable rtc target module
  ARM: dts: dra76x: Disable usb4_tm target module
  ARM: dts: dra76x: Disable rtc target module
  ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
  ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
  bus: ti-sysc: Handle devices with no control registers
  ARM: dts: Configure osc clock for d_can on am335x

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-17 04:53:32 -07:00
Olof Johansson
426356392c This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 5.3, please pull the following:
 
 - Markus provides a set of updates to the DPFE driver to support a new
   revision of the API to the firmware (version 3) and provides minor fixes
   about how the MR4-8 words are read for LPDDR4 devices
 
 - Florian removes a print of a virtual address in brcmstb_gisb.c
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl0AZj0ACgkQh9CWnEQH
 BwQHpQ//ZeW9+W6GHfY1bBhBQSuCH8V0oPv3Js73yESOBSwTvn59Io6A3XS9XCuU
 I/j/rYI6hMiWpIpudPf92fOxI1+IgqIF6JE93MHQRgAdGHuHBxOfDA4cdGXcnUfw
 Qk+j33mwf9toX+rK3dlfTuNny6ic0cpAV4OPMhB37jgf+LtiY++JhFEkrYJzpdpk
 aTvar62yZr8hzTLIp69aKkf9pGy7h9DXBdHaU6iGNB7/HXeadN/qW4/cDXSQXcKi
 pNIwByABXh8ZOJVfRCK4nq+dYZSdEkiLRXRz/SH/czwQFAsqkH3FYmWiLRQxfFny
 XehOSjn5YJWX6mE6VzgqwtmDIdkqlmZS0Nu+E6zeWwDb28s8aHxESktps4aJcd18
 jz3nl66n07SrkhRJGHd3TRvOiYJUr7TfcdqSxdm69e2uoy1zESpdoyA/5U691js0
 gSRpsJb9nfGK3OlGjLcKyHkIhq6oiTbGZOp9hWNz8P/76wqak50DiS8CQx+HEqLb
 kanZvv+vf+bvDEHLkUXVRGhH4vuK7cXkkm0MjovdYqXDiM7hK1otv3UbD8rN6Gzv
 qF0AH2vH7fbi0w7Q+Bb0nGnct1qMhcUWUavNdjbWNgQe4fOXvm1uH/VujLSjaJ8Q
 1HxB86RMnc1RnvpnFPk9gxIJj5cTrSx9n83SIGvz2F4EFYeK1zM=
 =Gw/Z
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.3/drivers' of https://github.com/Broadcom/stblinux into arm/drivers

This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 5.3, please pull the following:

- Markus provides a set of updates to the DPFE driver to support a new
  revision of the API to the firmware (version 3) and provides minor fixes
  about how the MR4-8 words are read for LPDDR4 devices

- Florian removes a print of a virtual address in brcmstb_gisb.c

* tag 'arm-soc/for-5.3/drivers' of https://github.com/Broadcom/stblinux:
  memory: brcmstb: dpfe: introduce DPFE API v3
  memory: brcmstb: dpfe: prepare for API-dependent sysfs attributes
  memory: brcmstb: dpfe: prepare support for multiple API versions
  memory: brcmstb: dpfe: wait for DCPU to be ready
  memory: brcmstb: dpfe: report firmware loading error
  memory: brcmstb: dpfe: remove unused code and fix formatting
  bus: brcmstb_gisb: Remove print of base address
  memory: brcmstb: dpfe: use byte 3 of registers MR4-MR8
  memory: brcmstb: dpfe: optimize generic_show()
  memory: brcmstb: dpfe: use msleep() over udelay()

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-17 04:52:52 -07:00
Olof Johansson
1126037393 NXP/FSL SoC driver updates for v5.3
DPAA2 Console driver
 - Add driver to export two char devices to dump logs for MC and
   AIOP
 
 DPAA2 DPIO driver
 - Add support for memory backed QBMan portals
 - Increase the timeout period to prevent false error
 - Add APIs to retrieve QBMan portal probing status
 
 DPAA Qman driver
 - Only make liodn fixup on powerpc SoCs with PAMU iommu
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEhb3UXAyxp6UQ0v6khtxQDvusFVQFAlzjAJMACgkQhtxQDvus
 FVQzBg/+Jmi8XNWxxIT+2MOKnEKZMiWwo9X+g4e3ZpwtoLujb9PaIAu3bY9Svhpj
 w2v6xUE8fNH1rlRcRQLLxW+v7ziruCx4iM2D6BKw1xgf8eu0ob4R1b+0bTgfSa9S
 xmHrNwgaTers7dB57ehYOq6PlExz0/wjU5hkPjhWMUkvA6RNAxDiZbexF0q21CYE
 T3dNA2v6sBuWqbtl6dzx+N884P7gLTuHMDJfcdFPTu+4I5YGJBnG6ZoM6YSLP5Pf
 i/sh57E7T3Zo4T0ysDDIndf1IssTOmmSxy+eTV1oCWBBSdD3m/zzb8Qw5ohMyGOI
 AMhrkMYOGKpwShCbtzKvfz4DYQhTj9YjTqO+G+EMuVEiPIvN+jkevsdub4+0q7BL
 q3Lo1T36JQ4RriI6m/csZIWju1LRNW0TQw8vLOAoOaLCOWEpNgGPxYFmqFiDqoNN
 8PKC3BkH9BRJo8s9phMqWiqFb7RYegiGUsCrfIDU4x2uyyWAW2uAYQxFOfW+Mc+h
 7/IonbApaS7uspn+CZFGp4TtXcbakbNoWgETf+b7zKJGrDqgWi2ErLHWxt1J3n54
 waJnGlMlrafGdXqBVZNvuAvqmHD0BNzkck4c3ht+z4M96fw0K38EgWVgKfayElaK
 EiX/55HmejQ6aoqNvrv7NZrg/2o5Vcly7C9RtPj3aHMbIdyiQ7k=
 =C+f6
 -----END PGP SIGNATURE-----

Merge tag 'soc-fsl-next-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.3

DPAA2 Console driver
- Add driver to export two char devices to dump logs for MC and
  AIOP

DPAA2 DPIO driver
- Add support for memory backed QBMan portals
- Increase the timeout period to prevent false error
- Add APIs to retrieve QBMan portal probing status

DPAA Qman driver
- Only make liodn fixup on powerpc SoCs with PAMU iommu

* tag 'soc-fsl-next-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: qbman_portals: add APIs to retrieve the probing status
  soc: fsl: qman: fixup liodns only on ppc targets
  soc: fsl: dpio: Add support for memory backed QBMan portals
  bus: mc-bus: Add support for mapping shareable portals
  soc: fsl: dpio: Increase timeout for QBMan Management Commands
  soc: fsl: add DPAA2 console support
  Documentation: DT: Add entry for DPAA2 console
  soc: fsl: guts: Add definition for LX2160A

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-17 04:38:06 -07:00
Olof Johansson
6515a2ceac Fixes for omap variants for dra7 mmc voltage and boot issues
This series contains dra7 mmc voltage fixes, and fixes to the recent
 changes to probe devices with device tree data insteas of legacy
 platform data:
 
 - Two fixes for dra7 mmc that needs 1.8V mode disabled as in case of a
   reset, the bootrom will try to access the mmc card at 3.3V potentially
   damaging the card
 
 - Two regression fixes for am335x d_can. We must allow devices with no
   control registers for ti-sysc interconnect target module driver for
   at least d_can, and we remove the incorrect control registers for
   d_can. And we must configure the osc clock for d_can as otherwise
   register access may fail depending on the bootloader version
 
 - Four regression fixes for dra7 variant dts files to tag rtc and usb4
   as disabled for dra71x and dra76x. These SoC variants do not have
   these devices, and got accidentally enabled when the L4 interconnect
   got defined in the dra7-l4.dtsi for the dra7 SoC family
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlzuLFwRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXM39Q/8CNz88ctxQupl8zqzAEq3Tr78Z9XdIlmR
 BEk3buRQmUZKd+v1M7k1aP97MFDaBjLM4qIEZRoT7WYuWSD04J6EzjCKOQrAMDMh
 cauv7X5ysNvyQNGUlEXxNIdFy5fB+jqfAqZ/R6dpiRAMXd7OtFMnBkyQR27WXyYM
 2hIVpGwGZJDatTyqdZo2/QW4vEktD/4kzs+iaojMDmePjsIw+engwa+/D0TrnXfk
 dhW5Ay+irME2+gepBeFOXVBRZNiXgl7Y7fgynMpgbYMxwfsbJiYUh2UF/myP7mMt
 bnyIwhRUr2jg4W5+PpCzt1KXh4jirdcREBW5SLWQNcmZ2WA1KklgKSUXcwgUPbAP
 hdgxyMRKFJFGrpCH3U6U9UBXOprO9Niumw8zEna/fQoY5XfN4GrnbZomqdyTon+6
 GzMivM1NnmMIUHd0EWrzxe2pbVLk2vNRH1x/dCvQ38HcnXaTH4gGWqbHZRxkUH7S
 ZkswHZQS32lOI7zK9EMlwfM5fa2QragnkH3e99CNH4ztr9cBs/p5ge2/ZRz0DOru
 vTEd1j69EMlvHyDjPtD3h+P4534hlEcclvHDrqINKQgWwn59zFy8LGgLL6YAT+n/
 cT1VJkWKCN2IPM0VXrFSmWIyQmplgevA1tF1/XdaYSs5NdNJOYXxTQsmludgq1il
 pQ1EK2psBPU=
 =Ajjk
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.2/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omap variants for dra7 mmc voltage and boot issues

This series contains dra7 mmc voltage fixes, and fixes to the recent
changes to probe devices with device tree data insteas of legacy
platform data:

- Two fixes for dra7 mmc that needs 1.8V mode disabled as in case of a
  reset, the bootrom will try to access the mmc card at 3.3V potentially
  damaging the card

- Two regression fixes for am335x d_can. We must allow devices with no
  control registers for ti-sysc interconnect target module driver for
  at least d_can, and we remove the incorrect control registers for
  d_can. And we must configure the osc clock for d_can as otherwise
  register access may fail depending on the bootloader version

- Four regression fixes for dra7 variant dts files to tag rtc and usb4
  as disabled for dra71x and dra76x. These SoC variants do not have
  these devices, and got accidentally enabled when the L4 interconnect
  got defined in the dra7-l4.dtsi for the dra7 SoC family

* tag 'omap-for-v5.2/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra71x: Disable usb4_tm target module
  ARM: dts: dra71x: Disable rtc target module
  ARM: dts: dra76x: Disable usb4_tm target module
  ARM: dts: dra76x: Disable rtc target module
  ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
  ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
  bus: ti-sysc: Handle devices with no control registers
  ARM: dts: Configure osc clock for d_can on am335x

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-16 13:27:36 -07:00
Tony Lindgren
4e23be473e bus: ti-sysc: Add support for module specific reset quirks
Some older interconnect target modules need module internal clock
toggling quirks to reset properly. We've been doing this in the
platform code earlier, but need to be able to it directly in the
ti-sysc driver when we no longer rely on on the platform code.

Let's add reset handling for 1-wire, i2c and watchdog. Later on
we can add more modules like msdi and dss as they get tested.
For dra7 pcie, we should be able to just use the rstctrl reset
driver when available.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-06-10 04:52:22 -07:00
Thomas Gleixner
1802d0beec treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:41 -07:00
Thomas Gleixner
c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00
Thomas Gleixner
1a59d1b8e0 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:35 -07:00
Tony Lindgren
b6a53c4c87 bus: ti-sysc: Detect uarts also on omap34xx
Looks like we currently only detect UART on omap36xx, let's also
add support for omap34xx. And let's also fix the SWSUP mode, it should
be SWSUP_SIDLE for omap3, not SWSUP_SIDLE_ACT like for omap4 and later.

Note that we are still booting omap3 for most part without ti-sysc,
so no need to treat this change as a fix.

Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-05-28 05:19:17 -07:00