Commit Graph

281 Commits

Author SHA1 Message Date
Linus Torvalds
399eb9b6cb ARM: SoC driver updates for v5.4
The branch contains driver changes that are tightly
 connected to SoC specific code. Aside from smaller
 cleanups and bug fixes, here is a list of the notable
 changes.
 
 New device drivers:
 
 - The Turris Mox router has a new "moxtet" bus driver
   for its on-board pluggable extension bus. The
   same platform also gains a firmware driver.
 
 - The Samsung Exynos family gains a new Chipid driver
   exporting using the soc device sysfs interface
 
 - A similar socinfo driver for Qualcomm Snapdragon
   chips.
 
 - A firmware driver for the NXP i.MX DSP IPC protocol
   using shared memory and a mailbox
 
 Other changes:
 
 - The i.MX reset controller driver now supports the
   NXP i.MX8MM chip
 
 - Amlogic SoC specific drivers gain support for
   the S905X3 and A311D chips
 
 - A rework of the TI Davinci framebuffer driver to
   allow important cleanups in the platform code
 
 - A couple of device drivers for removed ARM SoC
   platforms are removed. Most of the removals were
   picked up by other maintainers, this contains
   whatever was left.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6SUAAoJEJpsee/mABjZAfwP/01bXBOlGVusNH2zuh8IUSHb
 //5sTdWpwa2ugRekLOJUOjo2p9Fu70yH6xr4RUHI0rcRjZA0xR3bZPx45gI8LRHQ
 tfb25LaKqfgZjWMCJ8due1Lh7B6ffOQukryMtM/LoiCtqsy7b6aThEKaLpM9/Owl
 t53o4wKaVQJK5He9JQom9NOZidkl7tYLHmDQTOXhX2UEA/i45vtfjdsEBvoFPbTx
 +bYvlqs+SWlpDJk29j+oBOeKadPF+TFboLDiUCxH44MC3OsH51zjtKVBRTtbNMkb
 ek/ci5x9hCeHcYSEigNq2EMzEln09Yxyvjk8U/jLiJ1h1kz3p5MjqJbVMF1rYXpe
 ALuAwinM8Zv2o5/UOCkiQTWq79PtpOKHZKpNBXkaJ8kyqBLMSy8Fs3hCvXrDnjnQ
 TC8jX7UBqHRV2rbQIYehAQAxTvcRgTbqusQGLkUJInlux6go57LoMYHPABpHftJV
 kRdVeT0KzdCz1pvQwyekIog5hPLNTBi4jw6eQcOgeENvAea1MJa8lMMfKcVbIdS0
 ZVvxLl+K6noEKAv5lSeHAzjXq+cQFr3zDCsWy351mJETDHmE8zjsaHN1SgbRYLEk
 ZqzNwUYaPYBis38g85qaY/TSsJrWJ+jP8u7s9HTw3Oywg8SRy5vtW177s00/9VOd
 PYZ2UpqUeX8cdvggqUUU
 =lxFi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This contains driver changes that are tightly connected to SoC
  specific code. Aside from smaller cleanups and bug fixes, here is a
  list of the notable changes.

  New device drivers:

   - The Turris Mox router has a new "moxtet" bus driver for its
     on-board pluggable extension bus. The same platform also gains a
     firmware driver.

   - The Samsung Exynos family gains a new Chipid driver exporting using
     the soc device sysfs interface

   - A similar socinfo driver for Qualcomm Snapdragon chips.

   - A firmware driver for the NXP i.MX DSP IPC protocol using shared
     memory and a mailbox

  Other changes:

   - The i.MX reset controller driver now supports the NXP i.MX8MM chip

   - Amlogic SoC specific drivers gain support for the S905X3 and A311D
     chips

   - A rework of the TI Davinci framebuffer driver to allow important
     cleanups in the platform code

   - A couple of device drivers for removed ARM SoC platforms are
     removed. Most of the removals were picked up by other maintainers,
     this contains whatever was left"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  bus: uniphier-system-bus: use devm_platform_ioremap_resource()
  soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
  dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
  firmware: ti_sci: Allow for device shared and exclusive requests
  bus: imx-weim: remove incorrect __init annotations
  fbdev: remove w90x900/nuc900 platform drivers
  spi: remove w90x900 driver
  net: remove w90p910-ether driver
  net: remove ks8695 driver
  firmware: turris-mox-rwtm: Add sysfs documentation
  firmware: Add Turris Mox rWTM firmware driver
  dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
  bus: moxtet: fix unsigned comparison to less than zero
  bus: moxtet: remove set but not used variable 'dummy'
  ARM: scoop: Use the right include
  dt-bindings: power: add Amlogic Everything-Else power domains bindings
  soc: amlogic: Add support for Everything-Else power domains controller
  fbdev: da8xx: use resource management for dma
  fbdev: da8xx-fb: drop a redundant if
  fbdev: da8xx-fb: use devm_platform_ioremap_resource()
  ...
2019-09-16 15:52:38 -07:00
Linus Walleij
8a6abcd04e gpio: updates for v5.4
- use a helper variable for &pdev->dev in gpio-em
 - tweak the ifdefs in GPIO headers
 - fix function links in HTML docs
 - remove an unneeded error message from ixp4xx
 - use the optional clk_get in gpio-mxc instead of checking the return value
 - a couple improvements in pca953x
 - allow to build gpio-lpc32xx on non-lpc32xx targets
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAl1uVaMACgkQEacuoBRx
 13L0ag//WDVgrtN44Ri+eVuvtBK9Mv4PG8v1LNMzyUCiWta355sdGlWwD0Buc144
 bC4zME7+p4fDFM6Yp7yg/RKK5zBzUoVKaFSHxB4BXbBW4vrRjIaTaZAb35lxjhaF
 4K5s6DAtPvSsoMPojd6OIOVa0vBXRY/TaRgn3muIyQhINRLSvP55YO18wZWP/EOl
 QVoNMxPc0NBLBTEBjtWID6MIc2dXXqJu3AaPpnMc1DRW21zstMBnfSmIq7B+nPcM
 SiJzkUbmFhWn19BNhMYGhdYAC7QMsdaHMasipyE6dzWZvSbJOlZcTfTnYpLZSEMl
 xz0629suzheUDNCp8okTsg7cp30YzdPNrIi8DuWMPKJI9a2/w3d1uLHp4c1/Efu0
 d3ql7p2apBhsWXOzxTOEnQEd4fEWjjVIaItUeNpRboPjoDsW4kv31Nz4GuExxaI2
 k9X/YecRn1aIT3vE9njQyUpdFFmM+jslqOrZJuvaz/YDt59ifHFlz3Vbd4UWvju0
 U4NuA+OyJR3ZiUvLI4KcR5fThUBQ0J1lmg1S3iCTE9oww6BsudbH2wsEoAzDIJfu
 bFd4vjPELg0TjRfrTbUoRyHBUzi7P69HANpEluUM3YQCzHxTcicxicivsP43lhTc
 S4yPC743Inn9/kce4YBWRcmTJFnEhX4HQ3oEhQxJZP/ftP91ZSU=
 =6y9c
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.4-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel

gpio: updates for v5.4

- use a helper variable for &pdev->dev in gpio-em
- tweak the ifdefs in GPIO headers
- fix function links in HTML docs
- remove an unneeded error message from ixp4xx
- use the optional clk_get in gpio-mxc instead of checking the return value
- a couple improvements in pca953x
- allow to build gpio-lpc32xx on non-lpc32xx targets
2019-09-03 16:04:19 +02:00
Marek Behún
856ed97af5 drivers: gpio: Add support for GPIOs over Moxtet bus
This adds support for interpreting the input and output bits of one
device on Moxtet bus as GPIOs.
This is needed for example by the SFP cage module of Turris Mox.

Link: https://lore.kernel.org/r/20190812161118.21476-5-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14 15:30:56 +02:00
Arnd Bergmann
f2ee73147a gpio: lpc32xx: allow building on non-lpc32xx targets
The driver uses hardwire MMIO addresses instead of the data
that is passed in device tree. Change it over to only
hardcode the register offset values and allow compile-testing.

Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Tested-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-08-12 09:10:00 +02:00
Arnd Bergmann
b772d7aeae gpio: remove ks8695 driver
The platform is getting removed, so there are no remaining
users of this driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190809202749.742267-4-arnd@arndb.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-10 11:02:53 +02:00
Linus Torvalds
8de262531f - Core Frameworks
- Set 'struct device' fwnode when registering a new device
 
  - New Drivers
    - Add support for ROHM BD70528 PMIC
 
  - New Device Support
    - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
    - Add support for RK809 and RK817 to Rockchip RK808
    - Add support for Lid Angle to ChromeOS core
    - Add support for CS47L15 CODEC to Madera core
    - Add support for CS47L92 CODEC to Madera core
    - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
    - Add support for Add Intel Elkhart Lake PCH to Intel LPSS
 
  - New Functionality
    - Provide regulator supply information when registering; madera-core
    - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
    - Allow over-riding power button press via Device Tree; rohm-bd718x7
    - Differentiate between running processors; cros_ec_dev
 
  - Fix-ups
    - Big header file update; cros_ec_commands.h
    - Split header per-subsystem; rohm-bd718x7
    - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
    - Trivial; sorting, coding style; intel-lpss-pci
    - Only remove Power Off functionality if set locally; rk808
    - Make use for Power Off Prepare(); rk808
    - Fix spelling mistake in header guards; stmfx
    - Properly free IDA resources
    - SPDX fixups; cs47lXX-tables, madera
    - Error path fixups; hi655x-pmic
 
  - Bug Fixes
    - Add missing break in case() statement
    - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
    - Fix reference to Device Tree documentation; madera
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl0sLxgACgkQUa+KL4f8
 d2E25Q/9HmDJIdfyDQg0xv5IM5HS1WsP9BcJCEgoRIsad4mMDRYt+ZeLbslwMhue
 E9tsFH359gGvyqR+7d6hPpEUET1UEcJy4eRD1zAc0+epllQTDHSy8oHt1dtH+8xB
 2AU5rvAKOqBk83D+V2Hkx2KcroWEQQNYIoR9/12Pi3xmEB1uaCO0/Ajd3B28bIBM
 Tzi3cVQ3U7jY9EIM44GVTsjDAbMSkQR0iab6cQF0vJAWaUmGKlsO7iRrU1XkN69V
 qXyBauI8WGiGssihrE8r+jYvHvmg7hA9OKZIckUaMXD/k7kpHbwIaFRh7gukq4Re
 Q6Cy30NfVJ1tY66/5oqN6gj5znfeuEudMCCzYAkzlROSp5eApe2Ke5ajYn3kOCZd
 ZKcsrw9Fiox1lKmuWXDbyf0nqf4zwdDPAnShRWaaF5aipwgywyGcwSigVtK4F0P5
 Hjc5RLv7GjTAJq+ZzwgKyAdtx8L0mhdLd1ZTQpEXk/g/E9dW4GF72hWj9TQ/9BnA
 ZflKv8aP3lDGRHgO3Huwi4lMzskB8BVCQMCFwLwGs5cY1oZQhAjTdJzBZjTGexhC
 evuuA8OUsCrOWMvnZf3saSdHJ1iMHtfPnqEGHRJQtNj4fFaXv80LasIomvvfJc1/
 9JlRyAgm2pF7YDrgTh65ZzBb324eKSZZoAj9XZbnTyzxUAcF69A=
 =A3jw
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Set 'struct device' fwnode when registering a new device

  New Drivers:
   - Add support for ROHM BD70528 PMIC

  New Device Support:
   - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
   - Add support for RK809 and RK817 to Rockchip RK808
   - Add support for Lid Angle to ChromeOS core
   - Add support for CS47L15 CODEC to Madera core
   - Add support for CS47L92 CODEC to Madera core
   - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
   - Add support for Add Intel Elkhart Lake PCH to Intel LPSS

  New Functionality:
   - Provide regulator supply information when registering; madera-core
   - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
   - Allow over-riding power button press via Device Tree; rohm-bd718x7
   - Differentiate between running processors; cros_ec_dev

  Fix-ups:
   - Big header file update; cros_ec_commands.h
   - Split header per-subsystem; rohm-bd718x7
   - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
   - Trivial; sorting, coding style; intel-lpss-pci
   - Only remove Power Off functionality if set locally; rk808
   - Make use for Power Off Prepare(); rk808
   - Fix spelling mistake in header guards; stmfx
   - Properly free IDA resources
   - SPDX fixups; cs47lXX-tables, madera
   - Error path fixups; hi655x-pmic

  Bug Fixes:
   - Add missing break in case() statement
   - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
   - Fix reference to Device Tree documentation; madera"

* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
  mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
  mfd: madera: Fixup SPDX headers
  mfd: madera: Remove some unused registers and fix some defaults
  mfd: intel-lpss: Release IDA resources
  mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
  mfd: cs5535-mfd: Remove ifdef OLPC noise
  mfd: stmfx: Fix macro definition spelling
  dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
  MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
  mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
  mfd: rk808: Prepare rk805 for poweroff
  mfd: rk808: Check pm_power_off pointer
  mfd: cros_ec: differentiate SCP from EC by feature bit
  dt-bindings: Add binding for cros-ec-rpmsg
  mfd: madera: Add Madera core support for CS47L92
  mfd: madera: Add Madera core support for CS47L15
  mfd: madera: Update DT bindings to add additional CODECs
  mfd: madera: Add supply mapping for MICVDD
  mfd: madera: Fix potential uninitialised use of variable
  mfd: madera: Fix bad reference to pinctrl.txt file
  ...
2019-07-15 20:18:40 -07:00
Geert Uytterhoeven
db16bad6ef gpio: Sort GPIO drivers in Makefile
Sort the definitions for the individual GPIO drivers
in the Makefile by object file name. Align all entries
while we're at it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27 15:56:51 +01:00
Matti Vaittinen
18bc64b3ae gpio: Initial support for ROHM bd70528 GPIO block
ROHM BD70528 PMIC has 4 GPIO pins. Allow them to be
controlled by GPIO framework.

IRQs are handled by regmap-irq and GPIO driver is not
aware of the irq usage.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27 10:57:24 +01:00
Linus Torvalds
22c58fd70c ARM: SoC platform updates
SoC updates, mostly refactorings and cleanups of old legacy platforms.
 Major themes this release:
 
  - Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
  - Moving some of the ep93xx headers around to get it closer to multiplatform enabled.
  - Cleanups of Davinci
 
 This tag also contains a few patches that were queued up as fixes before
 5.1 but I didn't get sent in before release.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlzc+sMPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3ygQP/3mxLFGJxgHk6m/41V4Tepv9F2ZZ3BW4Lcp7
 vZtr6xiyhZXzIHOGzqQ4VGllfWhMWnjzZZe3iruSBY1gpJU7D4x054T3xVsIDs9F
 EIcbBm5fE0O0bdijfk7V8vBu7LOIP/KYdaD1n9WDhW0Hy4wTXN8NNLSKEU5Lq15p
 oz/A3QP5GcwhGAqaHyxx445La9yEKKWAsc2cOCRCdvfw6+n1GpoE6TI1YGjDvqbw
 xd73mIwXb0l0f7jhCV7OPyZ3t/aQgTD3ddr4gHUGNa8sSWmD5nupSVxj23FkbGby
 ejqJMxOfHpJJGIL/sxmR3+cFBYxyE+JNmrEq/kDW5ncWs/LY91juJxR1dkQKs6Mj
 4Y9CWruftDz34DlFs/J33hF/rdZ73O91ldk7zqND41Fi5aLrIKvZBJlTuqyZ0tGV
 YNRxsjWF953h8TXimDV0KvBgO4+E8d5ype/kIYtEGYO9DVmXQGMxFx2Gt2I/NfoH
 5tCtVFwDPpMxJShpXHLMzUT8sQL3mytg5L/MIPTGx+zAtDwx/qTLEEAElffG29oI
 vdzgJR0lrG/zzqQh25/M80UZYMdOrwtjAB42C+jAvlfQ0C4DtvSH+8OdcROOgj0b
 GbAJbTdHYTD6OpoxhSuRii7zzNxw+i7pQj+uLSt8s8ZReGkUk5a2wpRpoVoV2WxK
 RJHkMK95
 =pUeO
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms.

  Major themes this release:

   - Conversion of ixp4xx to a modern platform (drivers, DT, bindings)

   - Moving some of the ep93xx headers around to get it closer to
     multiplatform enabled.

   - Cleanups of Davinci

  This also contains a few patches that were queued up as fixes before
  5.1 but I didn't get sent in before release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  ARM: debug-ll: add default address for digicolor
  ARM: u300: regulator: add MODULE_LICENSE()
  ARM: ep93xx: move private headers out of mach/*
  ARM: ep93xx: move pinctrl interfaces into include/linux/soc
  ARM: ep93xx: keypad: stop using mach/platform.h
  ARM: ep93xx: move network platform data to separate header
  ARM: stm32: add AMBA support for stm32 family
  MAINTAINERS: update arch/arm/mach-davinci
  ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
  ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
  soc: ixp4xx: qmgr: Add DT probe code
  soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
  soc: ixp4xx: npe: Add DT probe code
  soc: ixp4xx: Add DT bindings for IXP4xx NPE
  soc: ixp4xx: qmgr: Pass resources
  soc: ixp4xx: Remove unused functions
  soc: ixp4xx: Uninline several functions
  soc: ixp4xx: npe: Pass addresses as resources
  ARM: ixp4xx: Turn the QMGR into a platform device
  ARM: ixp4xx: Turn the NPE into a platform device
  ...
2019-05-16 08:31:32 -07:00
Linus Torvalds
ebcf5bb282 - Core Frameworks
- Document (kerneldoc) core mfd_add_devices() API
 
  - New Drivers
    - Add support for Altera SOCFPGA System Manager
    - Add support for Maxim MAX77650/77651 PMIC
    - Add support for Maxim MAX77663 PMIC
    - Add support for ST Multi-Function eXpander (STMFX)
 
  - New Device Support
    - Add support for LEDs to Intel Cherry Trail Whiskey Cove PMIC
    - Add support for RTC to SAMSUNG Electronics S2MPA01 PMIC
    - Add support for SAM9X60 to Atmel HLCDC (High-end LCD Controller)
    - Add support for USB X-Powers AXP 8xx PMICs
    - Add support for Integrated Sensor Hub (ISH) to ChromeOS EC
    - Add support for USB PD Logger to ChromeOS EC
    - Add support for AXP223 to X-Powers AXP series PMICs
    - Add support for Power Supply to X-Powers AXP 803 PMICs
    - Add support for Comet Lake to Intel Low Power Subsystem
    - Add support for Fingerprint MCU to ChromeOS EC
    - Add support for Touchpad MCU to ChromeOS EC
    - Move TI LM3532 support to LED
 
  - New Functionality
    - Add/extend DT support; max77650, max77620
    - Add support for power-off; max77620
    - Add support for clocking; syscon
    - Add support for host sleep event; cros_ec
 
  - Fix-ups
    - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
    - Remove unused functionality; rk808, da9063-*
    - SPDX conversion; da9063-*, atmel-*,
    - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
    - Fix-up DT bindings; ti-lmu, cirrus,lochnagar
    - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
 
  - Bug Fixes
    - Fix incorrect defined values; max77620, da9063
    - Fix device initialisation; twl6040
    - Reset device on init; intel-lpss
    - Fix build warnings when !OF; sun6i-prcm
    - Register OF match tables; tps65912-spi
    - Fix DMI matching; intel_quark_i2c_gpio
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlzame0ACgkQUa+KL4f8
 d2GbBQ//bUoA+hcTo/ZUyQQGmE8axikZ6pacY+Y41pdzzLFoOM3IIz4NpdUF0fP2
 6r11zDiM2cL9CuMJl/AMiBv7fifowYykaBUEkkm8n2Cpj/bpLIm8eQy6jf14kqNR
 gj9sTy/feBcnZhqLLx9x9W9695nRTE4q3g+mDOj5sXRvZxqcPBaNgWkk5a8vtN9V
 yH2XkQSoK0EvvNWjl3pshp7HdKhX8k1xDZ2ghOi3Yk9JmFlg+wrWEKE4KQ7dDoUa
 SFXFReIwyleAw4Bc/demT1tSDiNgIPc9ZHtb67dUmDCQgpQqTK/h6WV1JeW1I0vh
 AM6n2hnogcbVcJdAHtwS5tR6nVahpUQ1V+XhYDyyHNmx6rqW5q2e3xRF75CT4wBZ
 NMIVaWNlih62Y196Exy+6CANHvJyxL6yRgvXkpfyaf9vYdXUrBRUujxn1PzrbkNJ
 kJwvZk5yHgg0n5SIV/D4CVy+RHP6uqe4oE4iXNWP5Um06OyVCieqMvoduyGQdLG/
 7Xrflc4EmeqTfWZrnW3ljh6sOBC+MQCfIKgRtvkPQ5EpcNU2VPXeNsAvIIHCpWHy
 HJY43WRP98DTNyP+/oBrsh56y8n+NwMBcWSmL4tv4cKmGx11bRvp35Mzy1ElPw6Y
 Zzttsw8Puz2EMmfGdcRwkZW0KWb5sAvJcImCkrjg/13QPHgcPgk=
 =dTSD
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Document (kerneldoc) core mfd_add_devices() API

  New Drivers:
   - Altera SOCFPGA System Manager
   - Maxim MAX77650/77651 PMIC
   - Maxim MAX77663 PMIC
   - ST Multi-Function eXpander (STMFX)

  New Device Support:
   - LEDs support in Intel Cherry Trail Whiskey Cove PMIC
   - RTC support in SAMSUNG Electronics S2MPA01 PMIC
   - SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
   - USB X-Powers AXP 8xx PMICs
   - Integrated Sensor Hub (ISH) in ChromeOS EC
   - USB PD Logger in ChromeOS EC
   - AXP223 in X-Powers AXP series PMICs
   - Power Supply in X-Powers AXP 803 PMICs
   - Comet Lake in Intel Low Power Subsystem
   - Fingerprint MCU in ChromeOS EC
   - Touchpad MCU in ChromeOS EC
   - Move TI LM3532 support to LED

  New Functionality:
   - max77650, max77620: Add/extend DT support
   - max77620 power-off
   - syscon clocking
   - croc_ec host sleep event

  Fix-ups:
   - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
   - Remove unused functionality; rk808, da9063-*
   - SPDX conversion; da9063-*, atmel-*,
   - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
   - Fix-up DT bindings; ti-lmu, cirrus,lochnagar
   - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb

  Bug Fixes:
   - Fix incorrect defined values; max77620, da9063
   - Fix device initialisation; twl6040
   - Reset device on init; intel-lpss
   - Fix build warnings when !OF; sun6i-prcm
   - Register OF match tables; tps65912-spi
   - Fix DMI matching; intel_quark_i2c_gpio"

* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
  mfd: Use dev_get_drvdata() directly
  mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
  mfd: cros_ec: Instantiate properly CrOS FP MCU device
  mfd: cros_ec: Update the EC feature codes
  mfd: intel-lpss: Add Intel Comet Lake PCI IDs
  mfd: lochnagar: Add links to binding docs for sound and hwmon
  mfd: ab8500-debugfs: Fix a typo ("deubgfs")
  mfd: imx6sx: Add MQS register definition for iomuxc gpr
  dt-bindings: mfd: LMU: Fix lm3632 dt binding example
  mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
  mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
  mfd: tps65912-spi: Add missing of table registration
  mfd: axp20x: Add USB power supply mfd cell to AXP803
  mfd: sun6i-prcm: Fix build warning for non-OF configurations
  mfd: intel-lpss: Set the device in reset state when init
  platform/chrome: Add support for v1 of host sleep event
  mfd: cros_ec: Add host_sleep_event_v1 command
  mfd: cros_ec: Instantiate the CrOS USB PD logger driver
  mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
  mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
  ...
2019-05-14 10:39:08 -07:00
Bartosz Golaszewski
72b5135bc3 gpio: max77650: Add GPIO support
Add GPIO support for max77650 mfd device. This PMIC exposes a single
GPIO line.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:06:58 +01:00
Linus Walleij
813e7d36f2 gpio: ixp4xx: Add driver for the IXP4xx GPIO
This adds a driver for the IXP4xx GPIO block found in
the Intel XScale IXP4xx systems.

The GPIO part of this block is pretty straight-forward and
just uses the generic MMIO GPIO library.

The irqchip side of this driver is hierarchical where
the main irqchip will receive a processed level trigger
in response to the edge detector of the GPIO block,
so for this reason the v2 version of the irqdomain API
is used (as well as in the parent IXP4xx irqchip) and
masking, unmasking and setting up the type on IRQ
happens on several levels.

Currently this GPIO controller will grab the parent
irqdomain using a special function, but as the platform
move toward device tree probing, this will not be needed:
we can just look up the parent irqdomain from the device
tree.

Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:13 +02:00
Shravan Kumar Ramani
c78c42d771 gpio: add driver for Mellanox BlueField GPIO controller
This patch adds support for the GPIO controller used by Mellanox
BlueField SOCs.

Reviewed-by: David Woods <dwoods@mellanox.com>
Signed-off-by: Shravan Kumar Ramani <sramani@mellanox.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-26 18:41:21 +01:00
Enrico Weigelt, metux IT consult
e09d168f13 gpio: AMD G-Series PCH gpio driver
GPIO platform driver for the AMD G-series PCH (eg. on GX-412TC)

This driver doesn't registers itself automatically, as it needs to
be provided with platform specific configuration, provided by some
board driver setup code.

Didn't implement oftree probing yet, as it's rarely found on x86.

Cc: linux-gpio@vger.kernel.org
Cc: linus.walleij@linaro.org
Cc: bgolaszewski@baylibre.com
Cc: dvhart@infradead.org
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-22 17:26:52 +01:00
Linus Walleij
2a0b0a57fa gpio: Add a Gateworks PLD GPIO driver
This adds a driver for Gateworks PLD GPIO, that exist in
two instances on the Gateworks Cambria GW2358-4 router
platform at least.

Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-09 11:33:37 +01:00
Andrew Lunn
b868db94a6 gpio: tqmx86: Add GPIO from for this IO controller
Some TQ-Systems ComExpress modules contain an IO controller with 8
GPIO lines.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28 15:19:23 +01:00
Jan Kotas
72ab2f7631 gpio: Add Cadence GPIO driver
This patch adds a driver for Cadence GPIO controller.

It can be enabled with GPIO_CADENCE Kconfig option.
It uses generic GPIO infrastructure and works
as an interrupt controller.
At the moment it only supports level sensitive irqs.

Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-21 11:41:00 +01:00
Andrei.Stefanescu@microchip.com
fb0b35d307 gpio: add driver for SAMA5D2 PIOBU pins
PIOBU pins do not lose their voltage during Backup/Self-refresh.
This patch adds a simple GPIO controller for them and a
maintainer for the driver.

This driver adds support for using the pins as GPIO
offering the possibility to read/set the voltage.

Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-21 10:55:57 +01:00
Eugeniy Paltsev
2505c7b012 GPIO: add single-register GPIO via CREG driver
Add single-register MMIO GPIO driver for complex cases where
only several fields in register belong to GPIO lines and each GPIO
line owns a field with different length and on/off value.

Such CREG GPIOs are used in Synopsys AXS10x and HSDK boards.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-10 09:21:06 +02:00
Uwe Kleine-König
be8c8facc7 gpio: new driver to work with a 8x12 siox
This driver controls a SIOX device that provides 20 I/O lines. The first
twelve are fixed inputs, the remaining eight are outputs.

Acked-by: Gavin Schenk <g.schenk@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-28 09:30:42 +02:00
Linus Walleij
32d064a16e gpio: Rename devres implementation file
All the other core files are named "gpiolib-<something>" so
let's rename the devres as well so we have some logical
namespacing here.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25 09:11:50 +02:00
Paul Cercueil
57e2143473 gpio: ingenic: Remove driver
The pinctrl-ingenic driver is now handling the GPIO chips directly.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29 13:38:20 +02:00
Linus Torvalds
532c2b926d - New Drivers
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
    - Add ChromeOS EC CEC driver
    - Add ROHM BD71837 PMIC driver
 
  - New Device Support
    - Add support for Dialog Semi DA9063L PMIC variant to DA9063
    - Add support for Intel Ice Lake to Intel-PLSS-PCI
    - Add support for X-Powers AXP806 to AXP20x
 
  - New Functionality
    - Add support for USB Charging to the ChromeOS Embedded Controller
    - Add support for HDMI CEC to the ChromeOS Embedded Controller
    - Add support for HDMI CEC to Intel HDMI
    - Add support for accessory detection to Madera devices
    - Allow individual pins to be configured via DT' wlf,csnaddr-pd
    - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
 
  - Fix-ups
    - Trivial renaming/spelling fixes; cros_ec, da9063-*
    - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
    - Transition to helper macros/functions; da9063-*
    - Constify; kempld-core
    - Improve error path/messages; wm8994-core
    - Disable IRQs locally instead of relying on USB subsystem; dln2
    - Remove unused code; rave-sp
    - New exports; sec-core
 
  - Bug Fixes
    - Fix possible false I2C transaction error; arizona-core
    - Fix declared memory area size; hi655x-pmic
    - Fix checksum type; rave-sp
    - Fix incorrect default serial port configuration: rave-sp
    - Fix incorrect coherent DMA mask for sub-devices; sm501
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlt6fm8ACgkQUa+KL4f8
 d2H8qA/8CLIKKEyc3CiQIF4LqmOPn+P20gSlnNdDFGHV+ZpVryL6qKItDy76nbQS
 +GrPCmhADDn7N224ENlv4TYsB1txr7iZvyNr6W7F0fbdTLq5Fl2+6WIB3NnopPPK
 MGhzR2jikfuYGwEG+BG3efvTnrjoi+NPbNPHDdoegOiy/Q1R8PhjMKh10xWo3pgG
 0TeZVg61ztfewAiebieMixNz+ehzFKK959Lsa7neV2ZsstBbM8B44UpXmLF5JLYe
 SR1ai5etSPBLxEeTXxlE+oG+fnDWk9Eyile7z1Nwg4et9OiXdyqAXBoA+BNDj2N2
 N8vHuU79pSra+XGbka/7Kyz8sXjb4u92mJlc1wDcsCF+hX+wGEmwkEUb0S4YEtOH
 1POi4YuIq0WF1oLSgCla/Pui0OQPIZaT31XhInYLV7rAX+MPgH0cUuLDsmzcg4ut
 C6RvoSzWiGA2JVqlALExSDtAkWUoZLjYkqnPYmZwGs25xsGUqJmiw1E73HI0OWr/
 EJuKQbeq/bOmRPqbbwO7z7peZJHOt6j344VCXBdP/sB7d/lR1sEGpxC03MIogHrA
 BuiPyfDXTF1NB/+ZPBFbSG2Xhcg51yL4ddRa1sMntP6J4Ht1dW7TOpLI21Yu3eRp
 jzKnA9DRa/LPUvoR1y+C2LxDeBcT5qFMg4mZedOgio/C0vCXvus=
 =4Yj4
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
   - Add ChromeOS EC CEC driver
   - Add ROHM BD71837 PMIC driver

  New Device Support:
   - Add support for Dialog Semi DA9063L PMIC variant to DA9063
   - Add support for Intel Ice Lake to Intel-PLSS-PCI
   - Add support for X-Powers AXP806 to AXP20x

  New Functionality:
   - Add support for USB Charging to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to Intel HDMI
   - Add support for accessory detection to Madera devices
   - Allow individual pins to be configured via DT' wlf,csnaddr-pd
   - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp

  Fix-upsL
   - Trivial renaming/spelling fixes; cros_ec, da9063-*
   - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
   - Transition to helper macros/functions; da9063-*
   - Constify; kempld-core
   - Improve error path/messages; wm8994-core
   - Disable IRQs locally instead of relying on USB subsystem; dln2
   - Remove unused code; rave-sp
   - New exports; sec-core

  Bug Fixes:
   - Fix possible false I2C transaction error; arizona-core
   - Fix declared memory area size; hi655x-pmic
   - Fix checksum type; rave-sp
   - Fix incorrect default serial port configuration: rave-sp
   - Fix incorrect coherent DMA mask for sub-devices; sm501"

* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: madera: Add register definitions for accessory detect
  mfd: sm501: Set coherent_dma_mask when creating subdevices
  mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
  mfd: bd71837: Core driver for ROHM BD71837 PMIC
  media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
  mfd: sec-core: Export OF module alias table
  mfd: as3722: Disable auto-power-on when AC OK
  mfd: axp20x: Support AXP806 in I2C mode
  mfd: axp20x: Add self-working mode support for AXP806
  dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
  mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
  mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
  mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
  mfd: rave-sp: Add legacy watchdog ping command translation
  mfd: rave-sp: Add legacy EEPROM access command translation
  mfd: rave-sp: Initialize flow control and parity of the port
  mfd: rave-sp: Fix incorrectly specified checksum type
  mfd: rave-sp: Remove unused defines
  mfd: hi655x: Fix regmap area declared size for hi655x
  mfd: ti_am335x_tscadc: Fix struct clk memory leak
  ...
2018-08-20 15:38:44 -07:00
Sergio Paracuellos
4ba9c3afda gpio: mt7621: Add a driver for MT7621
Add driver support for gpio of MT7621 SoC.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
[Switched wording WIDTH to STRIDE]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-09 13:41:48 +02:00
Richard Fitzgerald
aca429ff9d gpio: madera: Support Cirrus Logic Madera class codecs
This adds support for the GPIOs on Cirrus Logic Madera class codecs.
Any pins not used for special functions (see the pinctrl driver) can be
used as general single-bit input or output lines. The number of available
GPIOs varies between codecs.

Note that this is part of a composite MFD for these codecs and can only
be used with the corresponding MFD and other child drivers on those
silicon. The GPIO block on these codecs does not exist indepedently of
the rest of the MFD.

Signed-off-by: Nariman Poushin <nariman@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-06-05 11:15:30 +01:00
Linus Torvalds
1b2951dd99 This is the bulk of GPIO changes for the v4.17 kernel cycle:
New drivers:
 
 - Nintendo Wii GameCube GPIO, known as "Hollywood"
 
 - Raspberry Pi mailbox service GPIO expander
 
 - Spreadtrum main SC9860 SoC and IEC GPIO controllers.
 
 Improvements:
 
 - Implemented .get_multiple() callback for most of the
   high-performance industrial GPIO cards for the ISA bus.
 
 - ISA GPIO drivers now select the ISA_BUS_API instead of
   depending on it. This is merged with the same pattern
   for all the ISA drivers and some other Kconfig cleanups
   related to this.
 
 Cleanup:
 
 - Delete the TZ1090 GPIO drivers following the deletion of
   this SoC from the ARM tree.
 
 - Move the documentation over to driver-api to conform with
   the rest of the kernel documentation build.
 
 - Continue to make the GPIO drivers include only
   <linux/gpio/driver.h> and not the too broad <linux/gpio.h>
   that we want to get rid of.
 
 - Managed to remove VLA allocation from two drivers pending
   more fixes in this area for the next merge window.
 
 - Misc janitorial fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaxIehAAoJEEEQszewGV1zlEAP/3p3E6J8vPqJNV/C39c40krC
 ajo0ndiTC7cotmCXNQOl9xfMCTgkjBtx3WEKwTDfCsuWW+2YB0DRmMd0Bkf2RWjQ
 nM4rB64FzAu+rdD9jdGtfn24ofylSRFaHNQ/V8Prc2JVAXJt4DS97h+6kwzIAqCm
 A/xXQAx67k5qoTXLvR2n/8LX8TphSe2kwH/f/3/lJpNLfLCRRJ3GqJfpa72jw2eL
 4VIPc6KmttkqzJ1GFtzLPfhkhRr0p4sSzUNydlj5BKhmOSVu6Afv5ylgpK/p38dQ
 mGvNqFnU0lpwelsoZK75YikDFbqQjn4XkXJGvmIRMw4qM7crcw5oSkeMwCrcGqJW
 7Uo7NoQU94wcQSZTppFQdaJs7NHdcnpW7jcfRYYetZL/6eDGBtfxoym90Lyjvaqs
 y+ykofbadI0X/9omO5j+qozvIneLam/CF7iDRUb/5t1LJbNwtXUsVYhz3FuwPDt1
 ZHb6w+np9ZHN6H9jz3b/F9B/uQt54pshm7NorSXrJvZfKrv8kV14MoHgYsuQDDjV
 khbveygB8DwaPeV4XjpLeYhJB1L/Wjf46CVD6tyaCRDByGQmdoJEQF9QB2CxrF2J
 ouaaaS8tSC0IK/mKMMgJxC1Vr2gh0NMlQ3AL9EJDJvX+9RoIA2gwtBAiGnlEcdq3
 GyFAZ0szb5P4BaNnX9qc
 =C5t5
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.17 kernel cycle:

  New drivers:

   - Nintendo Wii GameCube GPIO, known as "Hollywood"

   - Raspberry Pi mailbox service GPIO expander

   - Spreadtrum main SC9860 SoC and IEC GPIO controllers.

  Improvements:

   - Implemented .get_multiple() callback for most of the
     high-performance industrial GPIO cards for the ISA bus.

   - ISA GPIO drivers now select the ISA_BUS_API instead of depending on
     it. This is merged with the same pattern for all the ISA drivers
     and some other Kconfig cleanups related to this.

  Cleanup:

   - Delete the TZ1090 GPIO drivers following the deletion of this SoC
     from the ARM tree.

   - Move the documentation over to driver-api to conform with the rest
     of the kernel documentation build.

   - Continue to make the GPIO drivers include only
     <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we
     want to get rid of.

   - Managed to remove VLA allocation from two drivers pending more
     fixes in this area for the next merge window.

   - Misc janitorial fixes"

* tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: Add Spreadtrum PMIC EIC driver support
  gpio: Add Spreadtrum EIC driver support
  dt-bindings: gpio: Add Spreadtrum EIC controller documentation
  gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe()
  pinctrl: qcom: Don't allow protected pins to be requested
  gpiolib: Support 'gpio-reserved-ranges' property
  gpiolib: Change bitmap allocation to kmalloc_array
  gpiolib: Extract mask allocation into subroutine
  dt-bindings: gpio: Add a gpio-reserved-ranges property
  gpio: mockup: fix a potential crash when creating debugfs entries
  gpio: pca953x: add compatibility for pcal6524 and pcal9555a
  gpio: dwapb: Add support for a bus clock
  gpio: Remove VLA from xra1403 driver
  gpio: Remove VLA from MAX3191X driver
  gpio: ws16c48: Implement get_multiple callback
  gpio: gpio-mm: Implement get_multiple callback
  gpio: 104-idi-48: Implement get_multiple callback
  gpio: 104-dio-48e: Implement get_multiple callback
  gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks
  gpio: pci-idio-16: Implement get_multiple callback
  ...
2018-04-05 09:51:41 -07:00
Baolin Wang
348f3cde84 gpio: Add Spreadtrum PMIC EIC driver support
The Spreadtrum PMIC EIC controller contains only one bank of debounce EIC,
and this bank contains 16 EICs. Each EIC can only be used as input mode,
as well as supporting the debounce and the capability to trigger interrupts
when detecting input signals.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:51:22 +02:00
Baolin Wang
25518e024e gpio: Add Spreadtrum EIC driver support
The Spreadtrum digital-chip EIC controller has 4 sub-modules: debounce EIC,
latch EIC, async EIC and sync EIC, and each sub-module can has multiple
banks and each bank contains 8 EICs.

Each EIC can only be used as input mode, and has the capability to trigger
interrupts when detecting input signals.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:51:17 +02:00
Arnd Bergmann
9a95e8d25a gpio: remove etraxfs driver
The cris architecture is getting removed, so we no longer need the
etraxfs driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26 15:56:53 +02:00
Baolin Wang
9a3821c2bb gpio: Add GPIO driver for Spreadtrum SC9860 platform
The Spreadtrum SC9860 platform GPIO controller contains 16 groups and
each group contains 16 GPIOs. Each GPIO can set input/output and has
the interrupt capability.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-02 11:00:43 +01:00
James Hogan
8f6d3b0147 gpio: Drop TZ1090 drivers
Now that arch/metag/ has been removed, along with TZ1090 SoC support,
remove the TZ1090 GPIO drivers. They are of no value without the
architecture and SoC platform code.

Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-01 15:31:02 +01:00
Jonathan Neuschäfer
8f55fed3c9 gpio: Add GPIO driver for Nintendo Wii
The Nintendo Wii's chipset (called "Hollywood") has a GPIO controller
that supports a configurable number of pins (up to 32), interrupts, and
some special mechanisms to share the controller between the system's
security processor (an ARM926) and the PowerPC CPU. Pin multiplexing is
not supported.

This patch adds a basic driver for this GPIO controller. Interrupt
support will come in a later patch.

This patch is based on code developed by Albert Herranz and the GameCube
Linux Team, file arch/powerpc/platforms/embedded6xx/hlwd-gpio.c,
available at https://github.com/DeltaResero/GC-Wii-Linux-Kernels, but
has grown quite dissimilar.

v3:
- Do some style cleanups, as suggest by Andy Shevchenko

v2:
- Change hlwd_gpio_driver.driver.name to "gpio-hlwd" to match the
  filename (was "hlwd_gpio")
- Remove unnecessary include of linux/of_gpio.h, as suggested by Linus
  Walleij.
- Add struct device pointer to context struct to make it possible to use
  dev_info(hlwd->dev, "..."), as suggested by Linus Walleij
- Use the GPIO_GENERIC library to reduce code size, as suggested by
  Linus Walleij
- Use iowrite32be instead of __raw_writel for big-endian MMIO access, as
  suggested by Linus Walleij
- Remove commit message paragraph suggesting to diff against the
  original driver, because it's so different now

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: Albert Herranz <albert_herranz@yahoo.es>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22 13:54:35 +01:00
Dave Stevenson
a98d90e7d5 gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service
Pi3 and Compute Module 3 have a GPIO expander that the
VPU communicates with.
There is a mailbox service that now allows control of this
expander, so add a kernel driver that can make use of it.

Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22 13:49:59 +01:00
William Breathitt Gray
5855620466 gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family
The ACCES PCIe-IDIO-24 device provides 56 lines of digital I/O (24 lines
of optically-isolated non-polarized digital inputs for AC and DC control
signals, 24 lines of isolated solid state FET digital outputs, and 8
non-isolated TTL/CMOS compatible programmable I/O). An interrupt is
generated when any of the inputs change state (low to high or high to
low).

Input filter control is not supported by this driver, and input filters
are deactivated by this driver. These devices are capable of
get_multiple and set_multiple functionality, but these functions have
not yet been implemented for this driver. Change-Of-State (COS)
detection functionality may be configured to fire interrupts on
exclusively rising/falling edges, but this driver currently only
implements COS detection for either both edges or none.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-10 14:39:28 +01:00
Maciej S. Szmigiero
a0d6500941 gpio: winbond: Add driver
This commit adds GPIO driver for Winbond Super I/Os.

Currently, only W83627UHG model (also known as Nuvoton NCT6627UD)
is supported but in the future a support for other Winbond models,
too, can be added to the driver.

A module parameter "gpios" sets a bitmask of GPIO ports to enable
(bit 0 is GPIO1, bit 1 is GPIO2, etc.).

One should be careful which ports one tinkers with since some
might be managed by the firmware (for functions like powering on and
off, sleeping, BIOS recovery, etc.) and some of GPIO port pins are
physically shared with other devices included in the Super I/O chip.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09 14:51:00 +01:00
Quentin Schulz
449317a8b4 pinctrl: move gpio-axp209 to pinctrl
To prepare the driver for the upcoming pinctrl features, move the GPIO
driver AXP209 from GPIO to pinctrl subsystem.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-07 10:05:30 +01:00
Linus Torvalds
6aa2f9441f This is the bulk of GPIO changes for the v4.15 kernel cycle:
CORE:
 - Fix the semantics of raw GPIO to actually be raw. No
   inversion semantics as before, but also no open draining,
   and allow the raw operations to affect lines used for
   interrupts as the caller supposedly knows what they are
   doing if they are getting the big hammer.
 
 - Rewrote the __inner_function() notation calls to names that
   make more sense. I just find this kind of code disturbing.
 
 - Drop the .irq_base() field from the gpiochip since now all
   IRQs are mapped dynamically. This is nice.
 
 - Support for .get_multiple() in the core driver API. This
   allows us to read several GPIO lines with a single
   register read. This has high value for some usecases: it
   can be used to create oscilloscopes and signal analyzers
   and other things that rely on reading several lines at
   exactly the same instant. Also a generally nice
   optimization. This uses the new assign_bit() macro from
   the bitops lib that was ACKed by Andrew Morton and
   is implemented for two drivers, one of them being the
   generic MMIO driver so everyone using that will be able
   to benefit from this.
 
 - Do not allow requests of Open Drain and Open Source
   setting of a GPIO line simultaneously. If the hardware
   actually supports enabling both at the same time the
   electrical result would be disastrous.
 
 - A new interrupt chip core helper. This will be helpful
   to deal with "banked" GPIOs, which means GPIO controllers
   with several logical blocks of GPIO inside them. This
   is several gpiochips per device in the device model, in
   contrast to the case when there is a 1-to-1 relationship
   between a device and a gpiochip.
 
 NEW DRIVERS:
 
 - Maxim MAX3191x industrial serializer, a very interesting
   piece of professional I/O hardware.
 
 - Uniphier GPIO driver. This is the GPIO block from the
   recent Socionext (ex Fujitsu and Panasonic) platform.
 
 - Tegra 186 driver. This is based on the new banked GPIO
   infrastructure.
 
 OTHER IMPROVEMENTS:
 
 - Some documentation improvements.
 
 - Wakeup support for the DesignWare DWAPB GPIO controller.
 
 - Reset line support on the DesignWare DWAPB GPIO controller.
 
 - Several non-critical bug fixes and improvements for the
   Broadcom BRCMSTB driver.
 
 - Misc non-critical bug fixes like exotic errorpaths, removal
   of dead code etc.
 
 - Explicit comments on fall-through switch() statements.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaCvGiAAoJEEEQszewGV1z+oAQAJUpdPH/msdgHDuXSuBcbuFq
 NObQdkRiz1hez4vJOT+kbgES6ay57MArnbmM/xRdy+37lKrmkP+yfZe4UUruQhhW
 f2GVlwBbUp9tIzNliS8IYWO0tj+BTYyg1MQx0C0nE1zMZqVZk44EDa9SO6esRaFJ
 SLc2BpO3oJCQRaObe0+KTHIJV0dK3vQh4QXSzL+cM5u7P67Jq+wv4xdLVVScwbJB
 4jgwVER3Ah0E1jHclIG2PxI1rbYKwlOBumafOTUlq5fmfC3tULVPJEm9FXcdaBLJ
 KAmtxX4yi+SgUccYFsmK+fNNLVQiAjmkhJCl6kxVOrxYqamrG100YST4Iew3sakM
 /iQ3lpup5L6eJ/dndfgE207OqRFhvAzNRxORv1p/wJIRLmV1/QehCX8GYOcDumXY
 MySRcEeUeZPfBHcnjIDRP6y/XOg8zBKso7GL+feRgLZUJZlNQZqokdC95TY9S5nm
 QLK+sU367o41tomyv5TP3y1DDsym6+ZdpuOUh73znxuz2x/x+FfTfwM2J0r8Ussm
 GQTfAojeBI9aSOZ2mvgRI1XxSprXqO3FFFWBwrQ6RS9rBceLF1o2ySKC2gI0FG5d
 6GBkARcN5RyyNtYkH923pyrqz/FZJc6ZkrsUTGmERM5HGuWwczcditqwYRhbHwl8
 pIlmX4y0AYh6FFVoIcQE
 =8Mon
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.15 kernel cycle:

  Core:

   - Fix the semantics of raw GPIO to actually be raw. No inversion
     semantics as before, but also no open draining, and allow the raw
     operations to affect lines used for interrupts as the caller
     supposedly knows what they are doing if they are getting the big
     hammer.

   - Rewrote the __inner_function() notation calls to names that make
     more sense. I just find this kind of code disturbing.

   - Drop the .irq_base() field from the gpiochip since now all IRQs are
     mapped dynamically. This is nice.

   - Support for .get_multiple() in the core driver API. This allows us
     to read several GPIO lines with a single register read. This has
     high value for some usecases: it can be used to create
     oscilloscopes and signal analyzers and other things that rely on
     reading several lines at exactly the same instant. Also a generally
     nice optimization. This uses the new assign_bit() macro from the
     bitops lib that was ACKed by Andrew Morton and is implemented for
     two drivers, one of them being the generic MMIO driver so everyone
     using that will be able to benefit from this.

   - Do not allow requests of Open Drain and Open Source setting of a
     GPIO line simultaneously. If the hardware actually supports
     enabling both at the same time the electrical result would be
     disastrous.

   - A new interrupt chip core helper. This will be helpful to deal with
     "banked" GPIOs, which means GPIO controllers with several logical
     blocks of GPIO inside them. This is several gpiochips per device in
     the device model, in contrast to the case when there is a 1-to-1
     relationship between a device and a gpiochip.

  New drivers:

   - Maxim MAX3191x industrial serializer, a very interesting piece of
     professional I/O hardware.

   - Uniphier GPIO driver. This is the GPIO block from the recent
     Socionext (ex Fujitsu and Panasonic) platform.

   - Tegra 186 driver. This is based on the new banked GPIO
     infrastructure.

  Other improvements:

   - Some documentation improvements.

   - Wakeup support for the DesignWare DWAPB GPIO controller.

   - Reset line support on the DesignWare DWAPB GPIO controller.

   - Several non-critical bug fixes and improvements for the Broadcom
     BRCMSTB driver.

   - Misc non-critical bug fixes like exotic errorpaths, removal of dead
     code etc.

   - Explicit comments on fall-through switch() statements"

* tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits)
  gpio: tegra186: Remove tegra186_gpio_lock_class
  gpio: rcar: Add r8a77995 (R-Car D3) support
  pinctrl: bcm2835: Fix some merge fallout
  gpio: Fix undefined lock_dep_class
  gpio: Automatically add lockdep keys
  gpio: Introduce struct gpio_irq_chip.first
  gpio: Disambiguate struct gpio_irq_chip.nested
  gpio: Add Tegra186 support
  gpio: Export gpiochip_irq_{map,unmap}()
  gpio: Implement tighter IRQ chip integration
  gpio: Move lock_key into struct gpio_irq_chip
  gpio: Move irq_valid_mask into struct gpio_irq_chip
  gpio: Move irq_nested into struct gpio_irq_chip
  gpio: Move irq_chained_parent to struct gpio_irq_chip
  gpio: Move irq_default_type to struct gpio_irq_chip
  gpio: Move irq_handler to struct gpio_irq_chip
  gpio: Move irqdomain into struct gpio_irq_chip
  gpio: Move irqchip into struct gpio_irq_chip
  gpio: Introduce struct gpio_irq_chip
  pinctrl: armada-37xx: remove unused variable
  ...
2017-11-14 17:23:44 -08:00
Thierry Reding
5b2b135a87 gpio: Add Tegra186 support
Tegra186 has two GPIO controllers that are largely register compatible
between one another but are completely different from the controller
found on earlier generations.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08 14:14:51 +01:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Masahiro Yamada
dbe776c2ca gpio: uniphier: add UniPhier GPIO controller driver
This GPIO controller is used on UniPhier SoC family.

It also serves as an interrupt controller, but interrupt signals are
just delivered to the parent irqchip without any latching or OR'ing.
This type of hardware can be well described with hierarchy IRQ domain.

One unfortunate thing for this device is that the interrupt mapping to
the interrupt parent is not contiguous.

I asked how DT can describe interrupt mapping between two irqchips [1],
but I could not find a good solution (at least in the framework level).
In fact, irqchip drivers using hierarchy domain generally hard-code the
DT binding of their parent.

After tackling on several approaches such as hard-code of hwirqs,
irq_domain_push_irq(), I ended up with a vendor specific property.
If we come up with a good idea to support this in the framework, we
can migrate over to it, but we can live with a driver-level solution
for now.

[1] https://lkml.org/lkml/2017/7/6/758

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-23 10:37:31 +02:00
Lukas Wunner
b2f68edfd5 gpio: Add driver for Maxim MAX3191x industrial serializer
The driver was developed for and tested with the MAX31913 built into
the Revolution Pi by KUNBUS, but should work with all members of the
MAX3191x family:

MAX31910: low power
MAX31911: LED drivers
MAX31912: LED drivers + 2nd voltage monitor + low power
MAX31913: LED drivers + 2nd voltage monitor
MAX31953: LED drivers + 2nd voltage monitor + isolation
MAX31963: LED drivers + 2nd voltage monitor + isolation + buck regulator

Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-19 22:40:07 +02:00
David Daney
5a2a30024d gpio: Add gpio driver support for ThunderX and OCTEON-TX
Cavium ThunderX and OCTEON-TX are arm64 based SoCs.  Add driver for
the on-chip GPIO pins.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22 14:28:22 +02:00
Rajmohan Mani
275b13a655 gpio: Add support for TPS68470 GPIOs
This patch adds support for TPS68470 GPIOs.
There are 7 GPIOs and a few sensor related GPIOs.
These GPIOs can be requested and configured as
appropriate.

The GPIOs are also provided with descriptive names.
However, the typical use case is that the OS GPIO
driver will interact with TPS68470 GPIO driver
to configure these GPIOs, as requested by the
platform firmware.

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14 15:37:38 +02:00
Linus Torvalds
c7d28eca1d This is the bulk of GPIO changes for the v4.13 series:
Core:
 - Export add/remove for lookup tables so that modules can export GPIO
   descriptor tables.
 - Handle GPIO sleep states: it is now possible to flag that a GPIO line
   may loose its state during suspend/resume of the system to save
   power. This is used in the Wolfson Micro Arizona driver.
 - ACPI-based GPIO was tightened up a lot around the edges.
 - Use bitmap_fill() to speed up a loop.
 
 New drivers:
 - Exar XRA1403 SPI-based GPIO.
 - MVEBU driver now supports Armada 7K and 8K.
 - LP87565 PMIC GPIO.
 - Renesas R-CAR R8A7743 (RZ/G1M).
 - The new IOT2040 8250 serial/GPIO also comes in through this
   changeset.
 
 Substantial driver changes:
 - Seriously fix the Exar 8250 GPIO portions to work.
 - The MCP23S08 was moved out to a pin control driver.
 - Convert MEVEBU to use regmap for register access.
 - Drop Vulcan support from the Broadcom driver.
 - Serious cleanup and improvement of the mockup driver, giving us a
   better test coverage.
 
 Misc:
 - Lots of janitorial clean up.
 - A bunch of documentation fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZX1MjAAoJEEEQszewGV1zEYUQALFsjJH7D2mRN4TSSEeVAcYr
 Uz52uupsou8tgW0IupRb/khO+V6zgd7j+kHDJLMxX+rCTw3pTq5+XGyi5+iNpxof
 TIIT1XBx4eq7Q/n4nWdGodHbHN9BXw7cGsNmTb1TS/G/6h1wOKxfzjvUNhDAC+2v
 idPy6B5G+WrDsYpBtTWlKHKQKVqbUlhLFyJYoglzqIeM5L9Ry/UoZ6sGleho3hKn
 Vlg/hMtkCexnVO9zopBe5CuEfseLrkcCgCvtQ713egzVXApryp4hqm3Xti20Ntgy
 OxnKhmVyloqd0kU0qLSpvDAf7B1invbHHbeZsag6wluTMrxgUYJONuonrqGeGiwB
 FBDtw9SGn2GlEXcs7sg8ANmAyr2XxxezKXD9XLBL5jadNB2KCY5yKMv1IK3VnYdq
 gEpFAiZ5cmlpZxIXqlyeZP6LKHNTci4amb33x1I/ghH2BTkGQ/3E3anXEbPNWF8G
 DDE6nrSgU0oQcNqRHyZaWNZpUIz4aFUgJtOEO4lYYP4+VzYSKTdrHseTiiJ91J7E
 WBz9p5JvSnB22+60RhyTAPjVjXgWa30nidf7WGCK0UHiIYffihCxGZRTlrhoEEUB
 fXgveJpqxLopYvxpUxi1OqlPYYo7zKRF5BzHsjKMpdVYXfdMdvs7eq2g/X889i1D
 WpbE9LyAH9FY5BM8YjFX
 =TpW1
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.13 series.

  Some administrativa:

  I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO
  driver coming in through this tree, along with a whole bunch of Exar
  8250 fixes. These are ACKed by Greg and also hit drivers/platform/*
  where they are ACKed by Andy Shevchenko.

  Speaking about drivers/platform/* there is also a bunch of ACPI stuff
  coming through that route, again ACKed by Andy.

  The MCP23S08 changes are coming in here as well. You already have the
  commits in your tree, so this is just a result of sharing an immutable
  branch between pin control and GPIO.

  Core:
   - Export add/remove for lookup tables so that modules can export GPIO
     descriptor tables.
   - Handle GPIO sleep states: it is now possible to flag that a GPIO
     line may loose its state during suspend/resume of the system to
     save power. This is used in the Wolfson Micro Arizona driver.
   - ACPI-based GPIO was tightened up a lot around the edges.
   - Use bitmap_fill() to speed up a loop.

  New drivers:
   - Exar XRA1403 SPI-based GPIO.
   - MVEBU driver now supports Armada 7K and 8K.
   - LP87565 PMIC GPIO.
   - Renesas R-CAR R8A7743 (RZ/G1M).
   - The new IOT2040 8250 serial/GPIO also comes in through this
     changeset.

  Substantial driver changes:
   - Seriously fix the Exar 8250 GPIO portions to work.
   - The MCP23S08 was moved out to a pin control driver.
   - Convert MEVEBU to use regmap for register access.
   - Drop Vulcan support from the Broadcom driver.
   - Serious cleanup and improvement of the mockup driver, giving us a
     better test coverage.

  Misc:
   - Lots of janitorial clean up.
   - A bunch of documentation fixes"

* tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits)
  serial: exar: Add support for IOT2040 device
  gpio-exar/8250-exar: Make set of exported GPIOs configurable
  platform: Accept const properties
  serial: exar: Factor out platform hooks
  gpio-exar/8250-exar: Rearrange gpiochip parenthood
  gpio: exar: Fix iomap request
  gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards
  serial: uapi: Add support for bus termination
  gpio: rcar: Add R8A7743 (RZ/G1M) support
  gpio: gpio-wcove: Fix GPIO control register offset calculation
  gpio: lp87565: Add support for GPIO
  gpio: dwapb: fix missing first irq for edgeboth irq type
  MAINTAINERS: Take maintainership for GPIO ACPI support
  gpio: exar: Fix reading of directions and values
  gpio: exar: Allocate resources on behalf of the platform device
  gpio-exar/8250-exar: Fix passing in of parent PCI device
  gpio: mockup: use devm_kcalloc() where applicable
  gpio: mockup: add myself as author
  gpio: mockup: improve the error message
  gpio: mockup: don't return magic numbers from probe()
  ...
2017-07-07 12:40:27 -07:00
Keerthy
5c7f2c76cd gpio: lp87565: Add support for GPIO
Add driver for lp87565 PMIC family GPIOs. Three GPIOs are supported
and can be configured in Open-drain output or Push-pull output.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-21 09:36:46 +02:00
Linus Walleij
350fe5ee49 Merge branch 'mcp23s08' of /home/linus/linux-pinctrl into devel 2017-05-23 09:52:40 +02:00
Linus Walleij
fe421052b3 Merge branch 'mcp23s08' into devel 2017-05-23 09:52:08 +02:00
Sebastian Reichel
64ac43e6fa gpio: mcp23s08: move to pinctrl
This moves the mcp23s08 driver from gpio to pinctrl. Actual
pinctrl support for configuration of the pull-up resistors
follows in its own patch.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23 09:45:29 +02:00
Nandor Han
5704520d78 gpio: xra1403: Add EXAR XRA1403 SPI GPIO expander driver
This driver support basic XRA1403 functionalities:
    - set gpio direction
    - get gpio direction
    - set gpio high/low
    - get gpio status

Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Semi Malinen <semi.malinen@ge.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22 17:48:41 +02:00
Paul Cercueil
b0653ce39a gpio: Add gpio-ingenic driver
This driver handles the GPIOs of all the Ingenic JZ47xx SoCs
currently supported by the upsteam Linux kernel.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22 17:18:19 +02:00