Commit Graph

10 Commits

Author SHA1 Message Date
Linus Torvalds
dfd437a257 arm64 updates for 5.3:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
 
 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly
 
 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)
 
 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
   and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)
 
 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)
 
 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic
 
 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms
 
 - perf: DDR performance monitor support for iMX8QXP
 
 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers
 
 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent
 
 - arm64 do_page_fault() and hugetlb cleanups
 
 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
 
 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
   introduced in 5.1)
 
 - CONFIG_RANDOMIZE_BASE now enabled in defconfig
 
 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area
 
 - Make ZONE_DMA32 configurable
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl0eHqcACgkQa9axLQDI
 XvFyNA/+L+bnkz8m3ncydlqqfXomQn4eJJVQ8Uksb0knJz+1+3CUxxbO4ry4jXZN
 fMkbggYrDPRKpDbsUl0lsRipj7jW9bqan+N37c3SWqCkgb6HqDaHViwxdx6Ec/Uk
 gHudozDSPh/8c7hxGcSyt/CFyuW6b+8eYIQU5rtIgz8aVY2BypBvS/7YtYCbIkx0
 w4CFleRTK1zXD5mJQhrc6jyDx659sVkrAvdhf6YIymOY8nBTv40vwdNo3beJMYp8
 Po/+0Ixu+VkHUNtmYYZQgP/AGH96xiTcRnUqd172JdtRPpCLqnLqwFokXeVIlUKT
 KZFMDPzK+756Ayn4z4huEePPAOGlHbJje8JVNnFyreKhVVcCotW7YPY/oJR10bnc
 eo7yD+DxABTn+93G2yP436bNVa8qO1UqjOBfInWBtnNFJfANIkZweij/MQ6MjaTA
 o7KtviHnZFClefMPoiI7HDzwL8XSmsBDbeQ04s2Wxku1Y2xUHLx4iLmadwLQ1ZPb
 lZMTZP3N/T1554MoURVA1afCjAwiqU3bt1xDUGjbBVjLfSPBAn/25IacsG9Li9AF
 7Rp1M9VhrfLftjFFkB2HwpbhRASOxaOSx+EI3kzEfCtM2O9I1WHgP3rvCdc3l0HU
 tbK0/IggQicNgz7GSZ8xDlWPwwSadXYGLys+xlMZEYd3pDIOiFc=
 =0TDT
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}

 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly

 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)

 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
   XAFLAG and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)

 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)

 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic

 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms

 - perf: DDR performance monitor support for iMX8QXP

 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers

 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent

 - arm64 do_page_fault() and hugetlb cleanups

 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)

 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
   'arm_boot_flags' introduced in 5.1)

 - CONFIG_RANDOMIZE_BASE now enabled in defconfig

 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area

 - Make ZONE_DMA32 configurable

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
  perf: arm_spe: Enable ACPI/Platform automatic module loading
  arm_pmu: acpi: spe: Add initial MADT/SPE probing
  ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
  ACPI/PPTT: Modify node flag detection to find last IDENTICAL
  x86/entry: Simplify _TIF_SYSCALL_EMU handling
  arm64: rename dump_instr as dump_kernel_instr
  arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
  arm64: Implement panic_smp_self_stop()
  arm64: Improve parking of stopped CPUs
  arm64: Expose FRINT capabilities to userspace
  arm64: Expose ARMv8.5 CondM capability to userspace
  arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
  arm64: ARM64_MODULES_PLTS must depend on MODULES
  arm64: bpf: do not allocate executable memory
  arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
  arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
  arm64: module: create module allocations without exec permissions
  arm64: Allow user selection of ARM64_MODULE_PLTS
  acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
  arm64: Allow selecting Pseudo-NMI again
  ...
2019-07-08 09:54:55 -07:00
Jeremy Linton
d24a0c7099 arm_pmu: acpi: spe: Add initial MADT/SPE probing
ACPI 6.3 adds additional fields to the MADT GICC
structure to describe SPE PPI's. We pick these out
of the cached reference to the madt_gicc structure
similarly to the core PMU code. We then create a platform
device referring to the IRQ and let the user/module loader
decide whether to load the SPE driver.

Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-06-27 16:53:42 +01:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Mark Rutland
167e61438d arm_pmu: acpi: request IRQs up-front
We can't request IRQs in atomic context, so for ACPI systems we'll have
to request them up-front, and later associate them with CPUs.

This patch reorganises the arm_pmu code to do so. As we no longer have
the arm_pmu structure at probe time, a number of prototypes need to be
adjusted, requiring changes to the common arm_pmu code and arm_pmu
platform code.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-20 11:34:54 +00:00
Mark Rutland
43fc9a2feb arm_pmu: acpi: check for mismatched PPIs
The arm_pmu platform code explicitly checks for mismatched PPIs at probe
time, while the ACPI code leaves this to the core code. Future
refactoring will make this difficult for the core code to check, so
let's have the ACPI code check this explicitly.

As before, upon a failure we'll continue on without an interrupt. Ho
hum.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-20 11:34:54 +00:00
Mark Rutland
0dc1a1851a arm_pmu: add armpmu_alloc_atomic()
In ACPI systems, we don't know the makeup of CPUs until we hotplug them
on, and thus have to allocate the PMU datastructures at hotplug time.
Thus, we must use GFP_ATOMIC allocations.

Let's add an armpmu_alloc_atomic() that we can use in this case.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-20 11:34:54 +00:00
Shaokun Zhang
d1809d0e64 drivers/perf: arm_pmu_acpi: drop redundant acpi_disabled check
acpi_disabled has been checked in armv8_pmu_driver_init and it shall
be ZERO in arm_pmu_acpi_probe, clean up this unnecessary check.

Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-04 13:42:59 +01:00
Arvind Yadav
a88dc7ba15 drivers/perf: arm_pmu_acpi: Release memory obtained by kasprintf
Free memory region, if arm_pmu_acpi_probe is not successful.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-09-22 15:11:46 +01:00
Wei Huang
477c50e8dc drivers/perf: arm_pmu_acpi: avoid perf IRQ init when guest PMU is off
We saw perf IRQ init failures when running Linux kernel in an ACPI
guest without PMU (i.e. pmu=off). This is because perf IRQ is not
present when pmu=off, but arm_pmu_acpi still tries to register
or unregister GSI. This patch addresses the problem by checking
gicc->performance_interrupt. If it is 0, which is the value set
by qemu when pmu=off, we skip the IRQ register/unregister process.

[    4.069470] bc00: 0000000000040b00 ffff0000089db190
[    4.070267] [<ffff000008134f80>] enable_percpu_irq+0xdc/0xe4
[    4.071192] [<ffff000008667cc4>] arm_perf_starting_cpu+0x108/0x10c
[    4.072200] [<ffff0000080cbdd4>] cpuhp_invoke_callback+0x14c/0x4ac
[    4.073210] [<ffff0000080ccd3c>] cpuhp_thread_fun+0xd4/0x11c
[    4.074132] [<ffff0000080f1394>] smpboot_thread_fn+0x1b4/0x1c4
[    4.075081] [<ffff0000080ec90c>] kthread+0x10c/0x138
[    4.075921] [<ffff0000080833c0>] ret_from_fork+0x10/0x50
[    4.076947] genirq: Setting trigger mode 4 for irq 43 failed
(gic_set_type+0x0/0x74)

Signed-off-by: Wei Huang <wei@redhat.com>
[will: add comment justifying deviation from ACPI spec, removed redundant hunk]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-05-30 12:40:03 +01:00
Mark Rutland
45736a72fb drivers/perf: arm_pmu: add ACPI framework
This patch adds framework code to handle parsing PMU data out of the
MADT, sanity checking this, and managing the association of CPUs (and
their interrupts) with appropriate logical PMUs.

For the time being, we expect that only one PMU driver (PMUv3) will make
use of this, and we simply pass in a single probe function.

This is based on an earlier patch from Jeremy Linton.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:54 +01:00